|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-24-2016, 11:19 AM
|
#1 |
|
Registered User
Join Date: Jan 2016
Location: Olathe KS
Posts: 9
|
1971 C10 402 with AC and g50 rear restoration
Half way through restoring this original black on black, factory AC with a big block truck. Currently the body is in the shop. New floors are in and cab corners. Fenders and doors are painted already. Just started body work on the bed. I also have the full set of trim for the truck. Engine is rebuilt and waiting on an engine stand. The chassis is at my shop where I've stripped it down to the metal for a new coat of POR 15 that I'm going to thin out. I have all new suspension for it front and rear including shocks and springs. Brakes are rebuilt front and rear.
I do have a few questions regarding a couple issues that have popped up along the way. So when I bought it, it had a 350/350 combo in it but it was originally 402/400. So I'm having trouble figuring out if I need the slip on yoke th400 or the bolt on? Also wondering what the correct length of tail shaft I need is? |
|
|
|
03-24-2016, 11:22 AM
|
#2 |
|
Registered User
Join Date: Jan 2016
Location: Olathe KS
Posts: 9
|
Re: 1971 C10 402 with AC and g50 rear restoration
More pictures
|
|
|
|
|
03-24-2016, 11:23 AM
|
#3 |
|
Registered User
Join Date: Jan 2016
Location: Olathe KS
Posts: 9
|
Re: 1971 C10 402 with AC and g50 rear restoration
More
|
|
|
|
|
03-24-2016, 11:25 AM
|
#4 |
|
Registered User
Join Date: Jan 2016
Location: Olathe KS
Posts: 9
|
Re: 1971 C10 402 with AC and g50 rear restoration
When it got to the body shop
|
|
|
|
|
03-24-2016, 11:29 AM
|
#5 |
|
Registered User
Join Date: Jan 2016
Location: Olathe KS
Posts: 9
|
Re: 1971 C10 402 with AC and g50 rear restoration
More pictures of the body after being pulled off
|
|
|
|
|
03-24-2016, 11:31 AM
|
#6 |
|
Registered User
Join Date: Jan 2016
Location: Olathe KS
Posts: 9
|
Re: 1971 C10 402 with AC and g50 rear restoration
More tear down and starting the chassis prep
|
|
|
|
|
03-24-2016, 11:31 AM
|
#7 |
|
Registered User
Join Date: Jan 2016
Location: Olathe KS
Posts: 9
|
Re: 1971 C10 402 with AC and g50 rear restoration
Chassis
|
|
|
|
|
03-24-2016, 03:37 PM
|
#8 |
|
Registered User
Join Date: Sep 2011
Location: Ark City, Kansas
Posts: 3,387
|
Re: 1971 C10 402 with AC and g50 rear restoration
Of course, TH400 had bolt on and slip on yokes. I've only see bolt on yokes on 1 ton stuff. Not sure if bolt on yokes have been on 3/4 tons...
My 68 396/TH400 has a slip on yoke. I've known folks to use the slip on yoke in place of a bolt on unit. |
|
|
|
|
03-26-2016, 11:21 AM
|
#9 |
|
Registered User
Join Date: Jan 2016
Location: Olathe KS
Posts: 9
|
Re: 1971 C10 402 with AC and g50 rear restoration
So what's the correct length for a tail shaft on a th400 for this truck with the two piece drive? I'm ready to get a transmission bought. I'll have the chassis painted this weekend and start the reassembly with all new parts. Hopefully after that I'll be dropping the engine and transmission back in and it's off to the body guy to finish putting the body back on.
|
|
|
|
|
04-21-2016, 08:37 PM
|
#10 |
|
Registered User
Join Date: Jan 2016
Location: Olathe KS
Posts: 9
|
Re: 1971 C10 402 with AC and g50 rear restoration
Chassis has been painted. Front suspension arms have been blasted are waiting for paint. Shocks and springs are on there way.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
