Its Mine the World Famous 67 Dragtruck - Page 43 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

watahyahknow · 04-09-2016, 07:54 AM

youre right with the engineplates the engine will become a structural piece of the frame
dont wipe away that motor as being weak yet we still have to see how mush nos he will spray

djracer · 04-09-2016, 08:29 AM

Quote:

Originally Posted by Marv D

Personally I think the motor plate attaching to those tabs just in front of the front struts,,, and the mid plate probably within a foot of the A-pillar bars of the cage,,, what's left between isn't going to have much room for flex. A ProMod or Altered has much less frame forward of the cage,, and a lot more power. Not saying Kevin will be underpowered by any means, just that I don't think he's looking at 2500HP+

Marv not yet but maybe later!

68c10owner · 04-09-2016, 12:03 PM

Quote:

Originally Posted by Marv D

Personally I think the motor plate attaching to those tabs just in front of the front struts,,, and the mid plate probably within a foot of the A-pillar bars of the cage,,, what's left between isn't going to have much room for flex. A ProMod or Altered has much less frame forward of the cage,, and a lot more power. Not saying Kevin will be underpowered by any means, just that I don't think he's looking at 2500HP+

But a pro mod or altered isn't using Google a stock C channel frame rail. Again, not bashing or trying to argue. Just something I thought about when I saw the pictures.

djracer · 04-13-2016, 08:49 PM

A little progress.

68Timber · 04-13-2016, 09:04 PM

No bed floor? Were you running one before you started the rebuild? Looking good. That rear end looks like a hoss.

djracer · 04-13-2016, 11:15 PM

Quote:

Originally Posted by 68Timber

No bed floor? Were you running one before you started the rebuild? Looking good. That rear end looks like a hoss.

Not bed floor then or now. It will have a bed cover. I upgraded to a fabbed housing and I am replacing the 35 spline axles with 40 spline gun drilled Mosers.

djracer · 04-14-2016, 09:33 PM

I have wanted these for a long time!

**Palf70Step** · 04-15-2016, 05:07 AM

Those are some really good looking wheels.

djracer · 04-15-2016, 06:38 AM

Thanks Bill

**Hart_Rod** · 04-15-2016, 07:41 AM

Nice progress Kevin!

WE B CRUZN · 04-26-2016, 08:29 PM

Talk about a long thread had to stop for lunch and dinner breaks LOL looking real good can't wait to see her done.

djracer · 04-27-2016, 07:04 AM

I need a couple of weeks of work.

regan wilson · 04-28-2016, 08:15 AM

Those wheels are going to look sexy on there Kevin. Get to work and get us some pics

djracer · 05-06-2016, 11:12 AM

Finally got around to working on it a bit. I have most of my stuff but I need a bunch of time to get it together.

djracer · 05-06-2016, 11:14 AM

One more if it will load

djracer · 05-15-2016, 09:59 AM

Somemore new goodies.

watahyahknow · 05-15-2016, 02:08 PM

have been looking intoo those truckarms from hotrods to hell before , they look nice , think they made them for a few other cars and trucks too
did they use I beams and added stiffeningplates to them made them from U profile welded against eachother like the originals or constructed the arms from flat steel ?
allso curious if they added stiffeningplates to both sides
(i'm guessing yes , as the arms should be mirror images of eachother )

its actually hard to see welds on the inside edge of the parts where there no stiffeningplates welded in and cant see the top and bottom edge of the arm so i cant be sure
cant realy see wat they did at the hingepoint either , looks like a bushing with rubber wall pressed inside thickwall pipe welded intoo the beam and it looks like they bended the stiffeningplate up so it welds to the outside edge of the pipe to make it stronger

could you make some closer pictures from both ends of those arms?

djracer · 05-15-2016, 06:07 PM

More pics for yall

watahyahknow · 05-15-2016, 08:31 PM

thanks man

tinydb84 · 05-15-2016, 10:30 PM

Those look very cool.

djracer · 05-16-2016, 12:38 AM

Thanks Guys. Steve at Hot Rods to Hell is real nice. I look forward to beating on these real hard real soon. The are plated on both sides and some on top and bottom.

57sailplane · 08-20-2016, 09:01 AM

so,

any progress. wondering about the one piece side glass still, have you messed with it at all..

later andrew k

prostreet1967 · 11-01-2016, 10:21 PM

haven't been on here n while. cool to see u still have truck and working to make it better.

prostreet1967 · 11-12-2016, 11:52 PM

hey dj is bed still mounting to cab? what supports rear bedsides its covered in the last few pics. with no tubs or floors how nasty does everything get under bed cover

djracer · 12-31-2016, 04:04 PM

Yes bed still mounted to cab. Rear gate is a skin as well and it has a custom mount to hold roll pan, tailgate skin and rear bedsides. It does get a decent amount of rubber in it. I may do some metal or carbon fiber at some point.

04-09-2016, 07:54 AM	#1051
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Its Mine the World Famous 67 Dragtruck youre right with the engineplates the engine will become a structural piece of the frame dont wipe away that motor as being weak yet we still have to see how mush nos he will spray __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

04-13-2016, 08:49 PM	#1054
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck A little progress. Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

04-13-2016, 09:04 PM	#1055
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Its Mine the World Famous 67 Dragtruck No bed floor? Were you running one before you started the rebuild? Looking good. That rear end looks like a hoss. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

04-14-2016, 09:33 PM	#1057
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck I have wanted these for a long time! Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

04-15-2016, 05:07 AM	#1058
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: Its Mine the World Famous 67 Dragtruck Those are some really good looking wheels. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

04-15-2016, 06:38 AM	#1059
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck Thanks Bill __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

04-15-2016, 07:41 AM	#1060
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Its Mine the World Famous 67 Dragtruck Nice progress Kevin! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

04-26-2016, 08:29 PM	#1061
WE B CRUZN Registered User Join Date: Mar 2016 Location: Strathroy Ontario Canada Posts: 42	Re: Its Mine the World Famous 67 Dragtruck Talk about a long thread had to stop for lunch and dinner breaks LOL looking real good can't wait to see her done.

04-27-2016, 07:04 AM	#1062
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck I need a couple of weeks of work. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

04-28-2016, 08:15 AM	#1063
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Its Mine the World Famous 67 Dragtruck Those wheels are going to look sexy on there Kevin. Get to work and get us some pics __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

05-06-2016, 11:12 AM	#1064
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck Finally got around to working on it a bit. I have most of my stuff but I need a bunch of time to get it together. Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

05-06-2016, 11:14 AM	#1065
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck One more if it will load Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

05-15-2016, 09:59 AM	#1066
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck Somemore new goodies. Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

05-15-2016, 02:08 PM	#1067
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Its Mine the World Famous 67 Dragtruck have been looking intoo those truckarms from hotrods to hell before , they look nice , think they made them for a few other cars and trucks too did they use I beams and added stiffeningplates to them made them from U profile welded against eachother like the originals or constructed the arms from flat steel ? allso curious if they added stiffeningplates to both sides (i'm guessing yes , as the arms should be mirror images of eachother ) its actually hard to see welds on the inside edge of the parts where there no stiffeningplates welded in and cant see the top and bottom edge of the arm so i cant be sure cant realy see wat they did at the hingepoint either , looks like a bushing with rubber wall pressed inside thickwall pipe welded intoo the beam and it looks like they bended the stiffeningplate up so it welds to the outside edge of the pipe to make it stronger could you make some closer pictures from both ends of those arms? __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts Last edited by watahyahknow; 05-15-2016 at 02:13 PM.

05-15-2016, 06:07 PM	#1068
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck More pics for yall Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

05-15-2016, 08:31 PM	#1069
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Its Mine the World Famous 67 Dragtruck thanks man __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

05-15-2016, 10:30 PM	#1070
tinydb84 Registered User Join Date: Jul 2009 Location: San Jose Ca Posts: 2,871	Re: Its Mine the World Famous 67 Dragtruck Those look very cool. __________________ David Used parts build: http://67-72chevytrucks.com/vboard/s...d.php?t=638991 My brother's Nova: http://www.67-72chevytrucks.com/vboa...d.php?t=727985 Rear suspension rework: http://www.67-72chevytrucks.com/vboa...d.php?t=750557 Instagram: myfabguy

05-16-2016, 12:38 AM	#1071
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck Thanks Guys. Steve at Hot Rods to Hell is real nice. I look forward to beating on these real hard real soon. The are plated on both sides and some on top and bottom. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-20-2016, 09:01 AM	#1072
57sailplane Senior Member Join Date: Mar 2004 Location: Nebraska Posts: 583	Re: Its Mine the World Famous 67 Dragtruck so, any progress. wondering about the one piece side glass still, have you messed with it at all.. later andrew k __________________ my build http://67-72chevytrucks.com/vboard/s...d.php?t=210902

11-01-2016, 10:21 PM	#1073
prostreet1967 Registered User Join Date: Oct 2006 Location: fort worth texas Posts: 395	Re: Its Mine the World Famous 67 Dragtruck haven't been on here n while. cool to see u still have truck and working to make it better.

11-12-2016, 11:52 PM	#1074
prostreet1967 Registered User Join Date: Oct 2006 Location: fort worth texas Posts: 395	Re: Its Mine the World Famous 67 Dragtruck hey dj is bed still mounting to cab? what supports rear bedsides its covered in the last few pics. with no tubs or floors how nasty does everything get under bed cover

12-31-2016, 04:04 PM	#1075
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck Yes bed still mounted to cab. Rear gate is a skin as well and it has a custom mount to hold roll pan, tailgate skin and rear bedsides. It does get a decent amount of rubber in it. I may do some metal or carbon fiber at some point. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.