Front Swaybar Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mk3barti · 04-15-2016, 04:46 PM

I found a 1" diameter sway bar for my 76, which currently does not have anything.

1. How much a difference would a 1 1/16 or 1 1/4 make over the 1"? Is it worth finding a bigger bar?
2. Is there anyone besides Early Classic Enterprise that makes the lowered frame brackets for these bars? They want $90 US to ship to Canada.

Malo83 · 04-15-2016, 05:29 PM

The big 1 1/4 bar will give you the best results, look for one in the junkyard on the 3/4 and 1 ton trucks and go with poly bushings to get the max out of the bar

04-15-2016, 04:46 PM	#1
mk3barti Registered User Join Date: May 2015 Location: Saskatoon Posts: 84	Front Swaybar Question I found a 1" diameter sway bar for my 76, which currently does not have anything. 1. How much a difference would a 1 1/16 or 1 1/4 make over the 1"? Is it worth finding a bigger bar? 2. Is there anyone besides Early Classic Enterprise that makes the lowered frame brackets for these bars? They want $90 US to ship to Canada. Last edited by mk3barti; 04-15-2016 at 05:02 PM.

04-15-2016, 05:29 PM	#2
Malo83 Cruzzzn' Vet Join Date: Jan 2005 Location: Porterville,Ca. Posts: 1,918	Re: Front Swaybar Question The big 1 1/4 bar will give you the best results, look for one in the junkyard on the 3/4 and 1 ton trucks and go with poly bushings to get the max out of the bar

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.