![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Apr 2015
Location: Yakima, WA
Posts: 362
|
anyone have a cheap cab or bed dolly set up?
My Cherry picker legs keeps hiting the dolly I made so I cant transfer my bed and cab when I need to work...its so low that the legs hit the caster dolly. I could buy new bigger casters but was wondering who has a nicer cheaper set up for this.. thanks
![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2016
Location: Florence
Posts: 3
|
Re: anyone have a cheap cab or bed dolly set up?
I have never uploaded a photo to the site before, so i am not sure if the photo showed up. I made mine out of a set of discarded tow dolly wheels. Cut the spindles off of the Dolly's welded them to a 2X2X 3/16 angle iron. Then bought a couple of inflated tire swivel cadters from harbor freight, and welde them at the opposite end. Laid a couple of 4X4 in the angle iron frame rails. The rockers Hang over the edge. Hope that helps. If the pictures did not show correctly send me an email
|
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Dec 2013
Location: Gods country East,Tn
Posts: 8,545
|
Re: anyone have a cheap cab or bed dolly set up?
build your own using 2X4's and cheap dolly wheels from harbor freight . it's not going to live there just long enough to rebuild it .
![]()
__________________
![]() 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jun 2013
Location: West Virginia
Posts: 6,421
|
Re: anyone have a cheap cab or bed dolly set up?
I would think 2x4's and some castered wheels would do it.
I built a storage cart from 1x4's and 2x4's and casters I bought from Tractor Supply last March and it has some 400 pounds of steel piled onto it and pushed under my garage counter. These cabs and beds don't really weigh that much anyway. I hear 4 men can lift and carry a cab so it cannot be too heavy. |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Oct 2006
Location: Orland Park Il
Posts: 2,041
|
Re: anyone have a cheap cab or bed dolly set up?
I have a 2x4 one I built to roll/work on a bed that's held up fine.
__________________
68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jun 2013
Location: Somewhere
Posts: 3,077
|
Re: anyone have a cheap cab or bed dolly set up?
I seem to recall someone was selling plans to make one from exhaust tubing that allowed you to roll it so the cab was in the normal position, or so the bottom was to the side to work on the underside. If that made any sense at all...
Picture two lengths of tubing making an L shape with the corner rolled by the muffler shop bolted to the cab mounts. Add features as desired. |
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Oct 2009
Location: Chattanooga, TN
Posts: 259
|
Re: anyone have a cheap cab or bed dolly set up?
Made mine out of two by fours and cheap caster wheels. Made the cab one so the front and rear two bys lined up with the cab mounting bolt holes so I could run the bolts down into two bys to keep it steady. You can build stout enough to use on multiple projects. Just do a little measuring and make a trip to the lumber store.
|
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() Join Date: Oct 2009
Location: Chattanooga, TN
Posts: 259
|
Re: anyone have a cheap cab or bed dolly set up?
Franken, I remember seeing that as well. Thatwas the trick for working on the bottom. Maybe it is here in the search?
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jan 2003
Location: Safford,AZ
Posts: 3,612
|
Re: anyone have a cheap cab or bed dolly set up?
|
![]() |
![]() |
![]() |
#10 |
Senior Member
![]() Join Date: Jan 2015
Location: Marquette Heights, IL.
Posts: 1,135
|
Re: anyone have a cheap cab or bed dolly set up?
Here is a couple pics of the one I use... one with my helper
![]()
__________________
Jimmy Hoelzel |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Aug 2016
Location: C
Posts: 2
|
Re: anyone have a cheap cab or bed dolly set up?
Had same problem with one I made out of 2x4 s, my hoist legs were too high, just took casters off, cut some 2x4 PCs and lag bolted them where casters mount problem solved.
|
![]() |
![]() |
![]() |
#12 |
Registered User
![]() Join Date: Jun 2012
Location: springfield mo
Posts: 3,075
|
Re: anyone have a cheap cab or bed dolly set up?
You have some measurements of that thing dustmaker?
The dolly, not your helper....im getting ready to build one for myself
__________________
United States Marine Corps 2000-2011 Iraq and Afghanistan veteran Just living life now and enjoying it and my wife, daughter and son ![]() Last edited by tommys72; 08-05-2016 at 01:33 PM. Reason: cant spell |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Feb 2007
Location: Colorado Springs, Co
Posts: 1,939
|
Re: anyone have a cheap cab or bed dolly set up?
I made mine out off a truck frame and used scaffold casters, used it alot as I used to part alot of these trucks. Check it out
|
![]() |
![]() |
![]() |
#14 | |
Registered User
Join Date: Jun 2013
Location: Somewhere
Posts: 3,077
|
Re: anyone have a cheap cab or bed dolly set up?
Quote:
![]() |
|
![]() |
![]() |
![]() |
#15 | |
Senior Member
![]() Join Date: Jan 2015
Location: Marquette Heights, IL.
Posts: 1,135
|
Re: anyone have a cheap cab or bed dolly set up?
Quote:
Now for my helper....better stick with dolly ![]()
__________________
Jimmy Hoelzel |
|
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Apr 2015
Location: Ayr Ontario
Posts: 1,122
|
Re: anyone have a cheap cab or bed dolly set up?
two pieces of pipe, four wheels. It rolls nose to back.
|
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Jun 2010
Location: San Diego Co.
Posts: 1,162
|
Re: anyone have a cheap cab or bed dolly set up?
^^^^^^^^^^Pretty Slik^^^^^^^^^^^^
__________________
1972 Chevy C-10, SWB, Fleet, 350/350, PS, PB, HEI, mostly stock, Survivor. ![]() |
![]() |
![]() |
![]() |
#18 |
Senior Member
![]() Join Date: Oct 2009
Location: Chattanooga, TN
Posts: 259
|
Re: anyone have a cheap cab or bed dolly set up?
I say metaldoc wins! Lol
|
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Apr 2015
Location: Ayr Ontario
Posts: 1,122
|
Re: anyone have a cheap cab or bed dolly set up?
I could roll it my self with some effort but not impossible. If ya lived closer I'd say come borrow them as they are not needed till next time.
|
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Jan 2003
Location: Safford,AZ
Posts: 3,612
|
Re: anyone have a cheap cab or bed dolly set up?
What diameter pipe and did you bend it yourself?
|
![]() |
![]() |
![]() |
#21 |
Registered User
![]() Join Date: Apr 2015
Location: Yakima, WA
Posts: 362
|
Re: anyone have a cheap cab or bed dolly set up?
WOW. I Was not inspecting a response on this thread.. lots of love here..
![]() |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Apr 2015
Location: Ayr Ontario
Posts: 1,122
|
Re: anyone have a cheap cab or bed dolly set up?
pipes are 1/8 wall and 2inch dia. no cross brace but could of needed one. I took the pipes to a muffler shop to bend them.
|
![]() |
![]() |
![]() |
#23 |
Senior Member
![]() Join Date: Jan 2015
Location: Marquette Heights, IL.
Posts: 1,135
|
Re: anyone have a cheap cab or bed dolly set up?
You have pics without a cab on it?
__________________
Jimmy Hoelzel |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Apr 2015
Location: Ayr Ontario
Posts: 1,122
|
Re: anyone have a cheap cab or bed dolly set up?
I hope these help I can take more pics or dimensions. Vertical tube is 48" as well high.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|