My progress - The 1947 - Present Chevrolet & GMC Truck Message Board Network

heldonss · 03-13-2004, 10:32 PM

Here are a few shots of mine...

heldonss · 03-13-2004, 10:33 PM

1 more

heldonss · 03-13-2004, 10:34 PM

another

heldonss · 03-13-2004, 10:38 PM

again

heldonss · 03-13-2004, 10:39 PM

last for now

**smitty62** · 03-13-2004, 10:44 PM

I know you have to reduce pic size to get them on here---but that's ridiculous!

**1970 CST Short Wide** · 03-14-2004, 12:15 AM

I think I see something wrong with those heads, you better send them to me and I'll check them out. LOL JK Very nice. be sure to keep us up-dated

72superBB · 03-14-2004, 12:25 AM

What are the front disc parts or setup? Rotor, caliper, etc? I like it!

Ron

spencra · 03-14-2004, 12:27 AM

Awesome chassis work there.

I was wondering if you might be able to post a couple of pics of that cab dolley you have there or explain how you put it together. I am looking for ideas to build my own cab dolley soon.

Thanks alot,
Larry.

FRENCHBLUE72 · 03-14-2004, 01:01 AM

Is that a steering stablizer on the front end???? Nice a$$ chassis btw..

MAC67 · 03-14-2004, 02:13 AM

man thats the makin of a gorgeous truck , a1 work nice job

Raven Lunatic · 03-14-2004, 02:44 AM

By the look of your current ride list, you must bleed money...lol...

Nice pics

Sweet72 · 03-14-2004, 02:57 AM

I'm Green with N-V, no, not really. I know how much time and work, not to metion $$$ goes into projects like ours. Awesome job so far, keep us posted!

heldonss · 03-14-2004, 08:34 PM

Quote:

Originally posted by 1970 CST Short Wide
I think I see something wrong with those heads, you better send them to me and I'll check them out. LOL JK Very nice. be sure to keep us up-dated

I will get right on that!

heldonss · 03-14-2004, 08:36 PM

Quote:

Originally posted by 72superBB
What are the front disc parts or setup? Rotor, caliper, etc? I like it!

Ron

I bought my rear disc setup with cross drilled/ slotted rotors from Classic Performance, and bought the front rotors and braided hoses from them too. The calipers are painted with a two part paint from Eastwood.

heldonss · 03-14-2004, 08:40 PM

Quote:

Originally posted by spencra
Awesome chassis work there.

I was wondering if you might be able to post a couple of pics of that cab dolley you have there or explain how you put it together. I am looking for ideas to build my own cab dolley soon.

Thanks alot,
Larry.

Give me a week and I will try to get the magazine article we got the plans out of....we have had that setup for about 10 years now. Works great...We have had 2 67' Novas on it,(actually painted my Nova's body on it) and a 71' LeMans Convert, and now my truck cab.

heldonss · 03-14-2004, 08:42 PM

Quote:

Originally posted by FRENCHBLUE72
Is that a steering stablizer on the front end???? Nice a$$ chassis btw..

Yes...I can't remember where I got it, but I think LMC... and a few others have them.

spencra · 03-14-2004, 08:45 PM

Thanks alot heldonss. I really appreciate it

Larry.

Alexis · 03-14-2004, 09:03 PM

very nice!!!! That is some awesome work you've done there.

krue · 03-14-2004, 09:08 PM

Looks like a good start on a great truck!

03-13-2004, 10:32 PM	#1
heldonss Registered User Join Date: Sep 2002 Location: SEMO Posts: 74	My progress Here are a few shots of mine... Attached Images __________________ Current rides: 2007 Silverado VortecMax 1500 2007 Silverado Classic 1500 2004 GTO, 6spd 2003 Silverado 3500, 8.1 w/ Allison 2002 Camaro SS, 35th Ann., 6spd 2002 Silverado 2500, 6.0 1999 Buick Regal GS, 3800 SC 1997 Camaro Z28, 30th Ann. convertible 1991 GMC Syclone, #170 of 2998 1990 454 SS, 26,000 miles 1987 GMC 3500 Box Van 1972 Chevy C-10 short bed 1970 GMC Sierra Grande..2 owner 1968 Camaro RS/SS, 396/375 HP 1967 Chevy II Nova 1967 Camaro Convertible 1957 Chevy Truck

03-13-2004, 10:33 PM	#2
heldonss Registered User Join Date: Sep 2002 Location: SEMO Posts: 74	1 more Attached Images Last edited by heldonss; 03-14-2004 at 08:42 PM.

03-13-2004, 10:34 PM	#3
heldonss Registered User Join Date: Sep 2002 Location: SEMO Posts: 74	another Attached Images Last edited by heldonss; 03-14-2004 at 08:43 PM.

03-13-2004, 10:38 PM	#4
heldonss Registered User Join Date: Sep 2002 Location: SEMO Posts: 74	again Attached Images Last edited by heldonss; 03-14-2004 at 08:43 PM.

03-13-2004, 10:39 PM	#5
heldonss Registered User Join Date: Sep 2002 Location: SEMO Posts: 74	last for now Attached Images Last edited by heldonss; 03-14-2004 at 08:43 PM.

03-13-2004, 10:44 PM	#6
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	I know you have to reduce pic size to get them on here---but that's ridiculous! __________________ Stepsides look like real trucks! Smitty

03-14-2004, 12:15 AM	#7
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,185	I think I see something wrong with those heads, you better send them to me and I'll check them out. LOL JK Very nice. be sure to keep us up-dated __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

03-14-2004, 12:25 AM	#8
72superBB Registered User Join Date: Nov 2003 Location: Mandan, ND Posts: 422	What are the front disc parts or setup? Rotor, caliper, etc? I like it! Ron __________________ Life is full of choices and a Chevy is the best choice. 1990 Chevy SWB

03-14-2004, 12:27 AM	#9
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Awesome chassis work there. I was wondering if you might be able to post a couple of pics of that cab dolley you have there or explain how you put it together. I am looking for ideas to build my own cab dolley soon. Thanks alot, Larry. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

03-14-2004, 01:01 AM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Is that a steering stablizer on the front end???? Nice a$$ chassis btw.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-14-2004, 02:13 AM	#11
MAC67 " SHOW ME" Join Date: Jan 2003 Location: shelbyville illinois Posts: 2,624	man thats the makin of a gorgeous truck , a1 work nice job

03-14-2004, 02:44 AM	#12
Raven Lunatic On the Hillbilly Highway Join Date: Nov 2002 Location: Edmonton, Alberta Posts: 90	By the look of your current ride list, you must bleed money...lol... Nice pics __________________ Does anyone else smell smoke? 1967 GMC 910, rolling frame coming soon!

03-14-2004, 02:57 AM	#13
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	I'm Green with N-V, no, not really. I know how much time and work, not to metion $$$ goes into projects like ours. Awesome job so far, keep us posted! __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.

03-14-2004, 08:45 PM	#18
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Thanks alot heldonss. I really appreciate it Larry. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

03-14-2004, 09:03 PM	#19
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	very nice!!!! That is some awesome work you've done there.



Register or Log In To remove these advertisements.

03-14-2004, 09:08 PM	#20
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Looks like a good start on a great truck! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.