06-30-2016, 07:25 PM | #76 |
Senior Member
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 1978 Russet Metallic 4x4
Thanks. I gave the truck back to my Dad today. He was really excited. The door panels are not saddle color. It's GM's mandarin orange. It's kinda a orange saddle. The matching vinyls are more orange, but the panel is definitely not saddle. There's a company in California called Just Dashes that will take the door panels and dash , sand the oxidized plastic out and then rewrap in color matched hard vinyl. It's really nice stuff, but super expensive.
Last edited by buffydores; 06-30-2016 at 07:31 PM. |
06-30-2016, 07:28 PM | #77 |
Senior Member
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 1978 Russet Metallic 4x4
Here's the finished wheels with the chrome trim ring:
The new stickers on the winch: Trim rings are awesome: Last edited by buffydores; 07-19-2017 at 03:23 PM. |
06-30-2016, 07:33 PM | #78 |
Senior Member
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 1978 Russet Metallic 4x4
I just received the 4X4 center caps for the rear. We're installing the rear spacers tomorrow. We're replacing the defective clock and the bad gas gauge sending unit next week when parts arrive.
|
06-30-2016, 09:23 PM | #79 |
Registered User
Join Date: Mar 2001
Location: RADFORD, VA
Posts: 2,651
|
Re: 1978 Russet Metallic 4x4
Looking good I bet your Dad was excited with Joy...
__________________
1964 BBC 402 4x4 |
06-30-2016, 11:57 PM | #80 |
Registered User
Join Date: Nov 2013
Location: Gallup, New Mexico
Posts: 188
|
Re: 1978 Russet Metallic 4x4
Those wheels really tied everything together! They look great !Great job Cameron !
|
07-01-2016, 09:20 AM | #81 |
I know the pieces fit
Join Date: Nov 2007
Location: MONTGOMERY, AL
Posts: 5,523
|
Re: 1978 Russet Metallic 4x4
They look better as 16's, I'd be tempted to run them without trim rings. Great choice.
|
07-01-2016, 10:16 AM | #82 |
Senior Member
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 1978 Russet Metallic 4x4
|
07-01-2016, 11:41 AM | #83 |
Senior Member
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 1978 Russet Metallic 4x4
|
07-01-2016, 03:38 PM | #84 |
Senior Member
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 1978 Russet Metallic 4x4
Here we go. New spare tire on custom 16" spare. I went 245/75R16 to give it a good clean fit:
All the wheel stuff lined out perfectly: Last edited by buffydores; 07-19-2017 at 03:22 PM. |
07-01-2016, 07:07 PM | #85 |
Registered User
Join Date: Oct 2014
Location: Scottsdale, AZ
Posts: 465
|
Re: 1978 Russet Metallic 4x4
That looks killer. nice job!
|
07-03-2016, 10:19 PM | #86 |
Senior Member
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 1978 Russet Metallic 4x4
Last couple of items. The steering pump whines when it gets warm. Waiting on the new NOS quartz clock.
Any suggestions on the steering pump? |
07-08-2016, 12:16 AM | #87 |
Registered User
Join Date: Jul 2016
Location: Central Texas
Posts: 40
|
Re: 1978 Russet Metallic 4x4
Love the seats, where did you come up with the material? I'm restoring a '79 and would like to come up with a way to do the blue plaid. Great restoration, hope mine looks half as good when I'm done.
|
07-08-2016, 06:16 AM | #88 |
Senior Member
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 1978 Russet Metallic 4x4
SMS out of Oregon has the materials stock piled.
|
07-08-2016, 09:19 PM | #90 |
Senior Member
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 1978 Russet Metallic 4x4
Newish.
These trucks make everything else look blah. Here it is today at a charity skeet shoot. There's something so right about driving around with a couple of shotguns and boxes of shells in this thing. 'Murica!!! I've spent the past two days replacing the clock, instrument backing plate, speedometer, circuit board, clear plastic bezel, dash bulbs, speedometer cable and speedo gears to get the speedo running true. I had my little GPS app measuring the difference between actual speed and speedo speed. It was fun. Last edited by buffydores; 07-19-2017 at 03:25 PM. |
07-08-2016, 10:35 PM | #91 |
Registered User
Join Date: Jun 2012
Location: springfield mo
Posts: 3,075
|
Re: 1978 Russet Metallic 4x4
Beautiful! Very nice work
__________________
United States Marine Corps 2000-2011 Iraq and Afghanistan veteran Just living life now and enjoying it and my wife, daughter and son |
07-09-2016, 06:03 PM | #92 |
Senior Member
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 1978 Russet Metallic 4x4
Both blinkers stopped working. Any ideas?
|
07-09-2016, 06:39 PM | #93 |
Senior Member
Join Date: Apr 2012
Location: Otway OH
Posts: 788
|
Re: 1978 Russet Metallic 4x4
could be your flasher.
|
07-09-2016, 08:01 PM | #94 |
Senior Member
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 1978 Russet Metallic 4x4
Left one is fine. Right one is not. The actual blinkers with fine. It's just the dash bulb that's not blinking. I just replaced the bulb, so that wouldn't be the first guess.
|
07-09-2016, 08:12 PM | #95 |
Senior Member
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 1978 Russet Metallic 4x4
I think it's a ground. It was dimmer than the right one before and after I replaced the bulb. Where did this thing ground out. I just replaced the circuit board, so the problem isn't there. Where did it ground?
|
07-10-2016, 08:25 AM | #96 |
Senior Member
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 1978 Russet Metallic 4x4
I'm thinking it's the bulb holder. Everything else grounds to the same place, so it's either the bulb or holder. I'll look at it in a couple of days.
|
07-10-2016, 03:43 PM | #97 |
Senior Member
Join Date: Mar 2013
Location: Ann Arbor, MI
Posts: 1,029
|
Re: 1978 Russet Metallic 4x4
Do you mind sharing part number(s) for the replacement speedo cable you used?
|
07-10-2016, 11:45 PM | #98 | |
Senior Member
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 1978 Russet Metallic 4x4
Quote:
Figured out the light. The bulb was a dud and the bulb plug had some corrosion or something that was dimming the bulb. I cleaned the bulb plug with soap and water, then vinegar, then soap and water, then water, then dry. Then I replaced the bulb. Now the light is just as bright as the left one. The driver side mirror won't stay put at highway speeds. Gonna fix that next. I think the rubber grommet does more holding than it first appears. Adding dielectric grease to the serpentine belt has addressed most of the whining sounds up front. Needed new header bolts and nuts. Got those on. Pretty much there. I like driving things for awhile to work out the bugs. I took my two boys to a local car show yesterday and showed the Blazer. That was super cool. Last edited by buffydores; 07-10-2016 at 11:53 PM. |
|
07-12-2016, 08:38 AM | #99 |
Senior Member
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 1978 Russet Metallic 4x4
Dad commented on the slop in the steering column, so I ordered the Borgeson steering shaft with u-joints on each end.
http://www.borgeson.com/xcart/produc...&cat=34&page=1 The steering box is new, the ball joints are new and I have a frame brace installed, so there's no reason I shouldn't upgrade the shaft to something new. It will probably be the first part of next week when I get a chance to install it. |
07-15-2016, 03:26 PM | #100 |
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: 1978 Russet Metallic 4x4
Outstanding work on the Blazer! Hopefully since I'm in the same part of Texas, I can see it some day in the future.
Where did you get the rubber you cut for the floor mats?
__________________
Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|