TN Door panels 67-71

[72peace]

Subscribing, may need some light green for my 69 soon.

[Gus350]

Originally Posted by Grumpy old man

It's an exact match to new original material ,so expect it to be cleaner and brighter than the material that's been subjected to 49 + years of use and exposure in your truck , for years they didn't reproduce the 60's and 70's "metallic " colors now they do . Pm me if you want a sample . It's the best match I have been able to find and costs twice what I would pay for black .

Okay sounds good if it matches original it will be fine how much for a set in the light green since the material cost is higher.

Thanks Kevin

[Grumpy old man]

$100.00 , that covers the extra cost . Still way below anywhere else . Grumpy

Pm sent .

[Grumpy old man]

Ttt

[Grumpy old man]

Ttt

[vweater2001]

How about red door panels for a 69 Chevy 1/2, could you make those? Would they have the water proofing/backing? Let me know as I'd be interested in a pair of door panels in red.

[TBohne]

Can I get a quote on a dark green metallic set of door panels, a dash pad cover and a bench seat cover with the hounds tooth inset? Thanks

[Grumpy old man]

Originally Posted by vweater2001

How about red door panels for a 69 Chevy 1/2, could you make those? Would they have the water proofing/backing? Let me know as I'd be interested in a pair of door panels in red.

Yes , they would have sewn pleats on high quality sew foam mounted on waterproof door board . $100.00 + shipping

[Grumpy old man]

[quote=TBohne;7652593]Can I get a quote on a dark green metallic set of door panels, a dash pad cover and a bench seat cover with the hounds tooth inset?

hounds tooth and dark green metallic and I would recover your visors to match the rest of the new interior .

[jim-bob]

I'm totally happy with my door panels!! They are what I thought LMC's would be when I ordered from them.. LMC's are one piece PLASTIC and I would have to shave off some bottom for them to even fit!
Thanks GRUMP

[Grumpy old man]

No problemo ! Glad your happy with them .

[Grumpy old man]

Interior kit
seat covers
door panels
french seamed dash cover
recover your visors .............. $400.00

[68is4me]

Would you be able to do something like this?

[Grumpy old man]

Originally Posted by 68is4me

Would you be able to do something like this?

No problem , I've been building interiors for almost 40 years for a living , that seat pattern just uses a little more material with the double horse shoe inserts you can see the outer panel go's completely across the seat so the pattern has to be cut up the roll of material instead of across the roll ,also it has double French seamed stitching on the outer edge which takes longer to sew .
I suggest some type of seat insert stitching ( it makes them stronger and last longer that's why Chevy did it )

Seat cover sewn on high quality 1/2" backed sew foam
Door panels in that design (door panel design would need to be adjusted if your using armrests )
A double French seamed dash cover to match seat stitching
Recover your visors to match double stiching
New hog ring pliers and hog rings to install cover
New door panel screws
You pick materials within reason

$600.00 in real leather add $300.00

Search albrightssupply.com for material samples and colors .

[Grumpy old man]

ttt

[berch 69GMC]

Grumpy, I have replied PM on Dodge Buddies.

[Grumpy old man]

Originally Posted by berch 69GMC

Grumpy, I have replied PM on Dodge Buddies.

Pm sent .

[berch 69GMC]

Back to you

[theclockdoctor]

do you make panels for the rear door and fake door on a 1971 suburban?

[Grumpy old man]

Originally Posted by theclockdoctor

do you make panels for the rear door and fake door on a 1971 suburban?

Sure, I don't have a burb here but I can run over to the chevytruckfarm and use one of his for the patterns . He had a few he's parting out that still had doors

[theclockdoctor]

I would like a set in black, just let me know how much and how you would like payment.
Gary McGinnis
2096568861
gary@gwmcginnis.com

[Grumpy old man]

http://http://http://http://

Originally Posted by Grumpy old man

Interior kit
seat covers
door panels
french seamed dash cover
recover your visors .............. $400.00

[68is4me]

Originally Posted by Grumpy old man

No problem , I've been building interiors for almost 40 years for a living , that seat pattern just uses a little more material with the double horse shoe inserts you can see the outer panel go's completely across the seat so the pattern has to be cut up the roll of material instead of across the roll ,also it has double French seamed stitching on the outer edge which takes longer to sew .
I suggest some type of seat insert stitching ( it makes them stronger and last longer that's why Chevy did it )

Seat cover sewn on high quality 1/2" backed sew foam
Door panels in that design (door panel design would need to be adjusted if your using armrests )
A double French seamed dash cover to match seat stitching
Recover your visors to match double stiching
New hog ring pliers and hog rings to install cover
New door panel screws
You pick materials within reason

$600.00 in real leather add $300.00

Search albrightssupply.com for material samples and colors .

I actually am not so worried about that pattern but more looking at that color. The truck will be a blue and has med saddle carpet. Just looking for something to give a little richer feeling, if that makes sense. Real leather not needed. I think even a hounds tooth might look good.

[AnotherWs6]

Originally Posted by Grumpy old man

Sure, I don't have a burb here but I can run over to the chevytruckfarm and use one of his for the patterns . He had a few he's parting out that still had doors

I have a 68 Burb and would also be interested in a full setup if you can swing it.

[Grumpy old man]

Originally Posted by AnotherWs6

I have a 68 Burb and would also be interested in a full setup if you can swing it.

Sure let me get a full set of patterns for the burbs and I'll get back to you .