|
07-20-2016, 04:16 PM
|
#1 |
|
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
235/261 side mounts?
Hi everyone, I need to put side mounts on my 261 to replace the front mount since I am swapping the crossmember and installing a power steering pump in the spot where the horseshoe mount goes. Is there any mount that will bolt on with some modifications or should I just start from scratch? Thanks
__________________
Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution Last edited by 62stepside longbox; 07-20-2016 at 04:22 PM. |
|
|
|
07-20-2016, 04:23 PM
|
#2 |
|
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: 235/261 side mounts?
Also found these on eBay, I could build something similar if there are no bolt on solutions
__________________
Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution |
|
|
|
|
07-20-2016, 07:35 PM
|
#3 |
|
Registered User
Join Date: Jan 2012
Location: Salado, Tx
Posts: 1,377
|
Re: 235/261 side mounts?
That pick looks like its off a 55-59 truck. The engine is a 235 and it will fit but the problem is the frame. 60-62 have wide frames and the 55-59 are not as wide. You might have to modify the mounts. You can order it and try it out to see if it will work.
__________________
John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513 |
|
|
|
|
07-20-2016, 10:20 PM
|
#4 | |
|
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: 235/261 side mounts?
Quote:
__________________
Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution |
|
|
|
|
|
07-21-2016, 06:35 PM
|
#5 |
|
Registered User
Join Date: Jan 2012
Location: Salado, Tx
Posts: 1,377
|
Re: 235/261 side mounts?
That should work fine.
__________________
John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513 |
|
|
|
|
07-22-2016, 09:50 PM
|
#6 |
|
Registered User
Join Date: Mar 2011
Location: Hollister, Ca
Posts: 178
|
Re: 235/261 side mounts?
235/261 Automatics used the side mounts. Maybe Ebay has some. When I put a 235 in my 63' I made a template and had a fab shop weld a plate to some 250 side mounts (We cut off the side that mated to the 250). Good Luck
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
