|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-12-2016, 03:36 PM
|
#1 |
|
Registered User
Join Date: Aug 2016
Location: bradenton florida
Posts: 2
|
HEI 14003 distributer chevy c10 350 engine
hello my Chevy c10 is stalling or not starting so we replaced the spark plug wires but on the distributer the plug that goes under the ground cables there is only one a red one I'm not to familiar with this type of truck the truck still wont run or it just stalls any help I have pictures of the engine and the distributer
|
|
|
|
08-12-2016, 04:54 PM
|
#2 |
|
Registered User
 Join Date: Nov 2007
Location: Hermiston, OR
Posts: 947
|
Re: HEI 14003 distributer chevy c10 350 engine
So there is only a red wire hooked up to the distributor? That is all you need for power. The other terminal is for a tach. make sure it has a full 12 volts. Also, make sure the ground strap is in the cap, and you have properly grounded the coil.
__________________
Running in place gets you nowhere fast. -me 1968 GTO 4-spd covnvertible 1970 K-20 4-speed, factory AC. |
|
|
|
|
08-12-2016, 09:50 PM
|
#3 |
|
Registered User
Join Date: Aug 2016
Location: bradenton florida
Posts: 2
|
Re: HEI 14003 distributer chevy c10 350 engine
we got the truck running again the carburetor was clogged up with gunk from the gas
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
