Need help! Missing a carb part.

[In The Ten Ring]

I put my carb back on today and hooked it back up. That part went easily. However, I am missing a part. This part screws into the opening seen at 5 O'Clock in these pics.

I have the flat washer that fits in here and the spring, does anyone have the part that screws in here?

*This is where the in-carb filter goes.

It's a Rochester "Monojet" carburetor, GM make.

Is this available still? Does someone have one they'd sell?

[davepl]

If it's the same fuel inlet fitting as a quadrajet, that should be easy, any parts store should have them. If they're specific to the monojet it might be a little tougher.

[geezer#99]

Try here.
http://quadrajetparts.com/monojet-in...c-240_252.html

[In The Ten Ring]

ttt

[68bowtie]

fuel inlet filter nut

[In The Ten Ring]

fuel inlet filter nut?

Thanks man. I called NAPA and apparently they stock that.

A board member said he'd let me have one, this way I have a back up in case that doesn't fit.

[In The Ten Ring]

Well I tested the part today and it fit the carb but is too big for the fuel line.

I'm headed off to NAPA because I know what I need. Thanks guys.

[68bowtie]

doh! never fails it's always one more thing.