The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1960-1966 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-10-2016, 11:47 AM   #676
Clayherndon
Registered User
 
Join Date: Oct 2016
Location: Orange tx
Posts: 2
Quote:
Originally Posted by Captainfab View Post
This is the power steering adapter plate that I have been making since 1993. It is of a little different design than the others on the market. With mine you don't need to drill out any threaded holes on the steering box. All four of the steering box bolts go thru the frame. Also there is no inner plate to deal with. I don't feel it is necessary for a 2 wheel drive truck. I've had this same plate on my '66 Suburban since 1993 and put just over 120,000 miles on it with no issues. When I've installed these, I stitch weld the plate to the frame for a little added strength. This isn't absolutely necessary though, since there are four bolts securing it to the frame. The price for this bracket is $55.00 plus $6.30 for shipping in the USA. Included is the bracket as shown and four grade 8 bolts and lock washers. To place an order and for payment information either send me a PM here on the forum or email me at captainfab454@hotmail dot com


For an additional part to go with this adapter plate, see page 6, posts #126 and #137

These adapter plates can also be used on the K series frames that didn't come from the factory with power steering.
I wanna order the bracket but will the pitman arm for the power steering unit fit the 65 style drag link ? I have inline six for now do u know where I can get a pump bracket for it
Posted via Mobile Device
Clayherndon is offline   Reply With Quote
Old 10-10-2016, 11:01 PM   #677
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
Re: Power Steering Adapter Plates

I replied to your email and payment has been received.


Quote:
Originally Posted by Clayherndon View Post
I wanna order the bracket but will the pitman arm for the power steering unit fit the 65 style drag link ? I have inline six for now do u know where I can get a pump bracket for it
Posted via Mobile Device
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 11-12-2016, 01:25 PM   #678
emfinger
Registered User
 
Join Date: Nov 2016
Location: Diamond Bar
Posts: 1
Re: Power Steering Adapter Plates

Quote:
Originally Posted by Captainfab View Post
PM sent
Hi I'm looking for a plate that bolts to a 500 series gear box that I can weld to my frame. do you have a web site where I can look at brackets?
Thanks
Tom
emfinger is offline   Reply With Quote
Old 11-13-2016, 12:26 AM   #679
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
Re: Power Steering Adapter Plates

Hello Tom

Sorry but no I do not have a website. I do not have time to learn how to do that with working 80 hrs a week every week. This is the only steering box adapter plate that I make.

Quote:
Originally Posted by emfinger View Post
Hi I'm looking for a plate that bolts to a 500 series gear box that I can weld to my frame. do you have a web site where I can look at brackets?
Thanks
Tom
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 11-13-2016, 01:15 AM   #680
HSRACER
Registered User
 
HSRACER's Avatar
 
Join Date: Sep 2007
Location: Katy TX
Posts: 1,268
Re: Power Steering Adapter Plates

I just put mine on that I bought a year ago. Great product, nice template and it works great.

Is there anything I can do to get a tighter right turn radius?
__________________
HSRACER
Slammed 53 5 window
Blown/Bagged 54 Pickup
Patinaed 67 LS stepside
Supercharged 67 Nova
Bagged 69 Suburban Turbo'ed 5.3 LS
HSRACER is offline   Reply With Quote
Old 11-13-2016, 11:49 PM   #681
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
Re: Power Steering Adapter Plates

If you are talking about being able to turn sharper one way than the other, have an alignment done and tell them what you have done and ask them to center the draglink.

Quote:
Originally Posted by HSRACER View Post
I just put mine on that I bought a year ago. Great product, nice template and it works great.

Is there anything I can do to get a tighter right turn radius?
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 11-14-2016, 05:17 AM   #682
tonys87
Registered User
 
Join Date: Oct 2013
Location: las vegas
Posts: 73
Re: Power Steering Adapter Plates

Hi CaptainFab, I'm interested in your full kit. Could you email me more info at Tonys87gn@yahoo.com or PM me.
Price and parts included. I'm working on a 64 c10 half ton with a 7802644 gear box.
Thank you!
tonys87 is offline   Reply With Quote
Old 11-15-2016, 08:57 AM   #683
65 GMC
Registered User
 
Join Date: Aug 2015
Location: Great Bend, kansas
Posts: 135
Re: Power Steering Adapter Plates

PM Sent
65 GMC is offline   Reply With Quote
Old 11-16-2016, 01:20 AM   #684
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
Re: Power Steering Adapter Plates

PM received, email sent, payment received. Thank you

Quote:
Originally Posted by 65 GMC View Post
PM Sent
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 11-16-2016, 03:28 AM   #685
inkfamous13
Registered User
 
Join Date: Nov 2015
Location: lancaster ca
Posts: 138
Re: Power Steering Adapter Plates

If im installing 1972 pwr steering box and complete c10 front crossmember swap onto a 66c20 would i still need this bracket? Also might be installing automatic steering colum down the road if i ditch the 5 spd for auto but as of now to get the pwr steering with stock 66 3 speed tree column do i need this braket or any other things you carry or makevto complete this swap? Never swaped in pwr steering into none of my 60-66 trucks but my damaged elbow will love it lol. Thanks for any help or answers and your products look amazing and good reviews. Also do you sell a small notch for back? Was going to just use half piece of pipe and steel plate when i install the 5 lug 72c10 12 bolt rear inplace of the dana 8 lug. Thnks
inkfamous13 is offline   Reply With Quote
Old 11-17-2016, 01:04 AM   #686
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
Re: Power Steering Adapter Plates

Yes you will still need an adapter plate. The '68-'86 C series and '87-'91 R series steering boxes are all basically the same and are interchangeable. Needing the plate has nothing to do with the steering box and everything to do with the frame it is to be installed on.

If you are upgrading to power brakes, you might consider one of my brake booster brackets.

No I do not make any rear frame notches. There are already many, many,many people that do.

Quote:
Originally Posted by inkfamous13 View Post
If im installing 1972 pwr steering box and complete c10 front crossmember swap onto a 66c20 would i still need this bracket? Also might be installing automatic steering colum down the road if i ditch the 5 spd for auto but as of now to get the pwr steering with stock 66 3 speed tree column do i need this braket or any other things you carry or makevto complete this swap? Never swaped in pwr steering into none of my 60-66 trucks but my damaged elbow will love it lol. Thanks for any help or answers and your products look amazing and good reviews. Also do you sell a small notch for back? Was going to just use half piece of pipe and steel plate when i install the 5 lug 72c10 12 bolt rear inplace of the dana 8 lug. Thnks
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 12-13-2016, 03:21 PM   #687
swmnboy
Registered User
 
Join Date: Sep 2008
Location: Ellsworth,MN
Posts: 26
Re: Power Steering Adapter Plates

I need a power steering adapter plate and a power brake booster adapter for a 1966 c10...what would be the total with shipping to 56129. Thanks
swmnboy is offline   Reply With Quote
Old 12-14-2016, 12:09 AM   #688
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
Re: Power Steering Adapter Plates

If you need just the '63-'66 steering box adapter plate and not the tube and flange and if you need a standard '63-'66 booster bracket in bare steel, with shipping the total is $122.35. Let me know.

Quote:
Originally Posted by swmnboy View Post
I need a power steering adapter plate and a power brake booster adapter for a 1966 c10...what would be the total with shipping to 56129. Thanks
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 12-14-2016, 12:23 AM   #689
swmnboy
Registered User
 
Join Date: Sep 2008
Location: Ellsworth,MN
Posts: 26
Re: Power Steering Adapter Plates

oops, I need the tube and flange also, bare steel on the booster bracket is fine. Can you pm me your paypal info? Thanks

Last edited by swmnboy; 12-14-2016 at 12:28 AM. Reason: addl info
swmnboy is offline   Reply With Quote
Old 12-14-2016, 12:53 AM   #690
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
Re: Power Steering Adapter Plates

PM sent.

Quote:
Originally Posted by swmnboy View Post
oops, I need the tube and flange also, bare steel on the booster bracket is fine. Can you pm me your paypal info? Thanks
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 12-14-2016, 09:21 AM   #691
swmnboy
Registered User
 
Join Date: Sep 2008
Location: Ellsworth,MN
Posts: 26
Re: Power Steering Adapter Plates

payment sent
swmnboy is offline   Reply With Quote
Old 12-15-2016, 12:27 AM   #692
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
Re: Power Steering Adapter Plates

Payment received and order shipped. Thank you

Quote:
Originally Posted by swmnboy View Post
payment sent
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 12-31-2016, 06:10 PM   #693
nbrfd007
Senior Member
 
nbrfd007's Avatar
 
Join Date: Nov 2007
Location: New Blaine, Arkansas
Posts: 751
Re: Power Steering Adapter Plates

Checking in to see if you have developed a kit for 62 4X4 Suburban.
Thanks,
Tim
nbrfd007 is offline   Reply With Quote
Old 01-01-2017, 12:54 AM   #694
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
Re: Power Steering Adapter Plates

No I do not have anything specific to a '62 4x4 frame. The steering box adapter plate is the same. I just do not have a template or installation instructions specific to a 4x4 frame. I still have not had time with working 80 hrs/7days a week every week. Member Les Otte has posted the necessary dimensions in his build thread here.

http://www.67-72chevytrucks.com/vboa...=632508&page=6

Quote:
Originally Posted by nbrfd007 View Post
Checking in to see if you have developed a kit for 62 4X4 Suburban.
Thanks,
Tim
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 01-01-2017, 12:45 PM   #695
kchampagne
Registered User
 
kchampagne's Avatar
 
Join Date: Feb 2016
Location: Mountain Top, PA
Posts: 114
Re: Power Steering Adapter Plates

Tim, I just installed the adapter plate on my 65 Burb 4x4 and it worked perfectly. I referenced Member Les Otte build link while doing mine. Very straightforward. Thanks again Captainfab!
Attached Images
  
kchampagne is offline   Reply With Quote
Old 01-10-2017, 02:34 PM   #696
nbrfd007
Senior Member
 
nbrfd007's Avatar
 
Join Date: Nov 2007
Location: New Blaine, Arkansas
Posts: 751
Re: Power Steering Adapter Plates

Quote:
Originally Posted by Captainfab View Post
No I do not have anything specific to a '62 4x4 frame. The steering box adapter plate is the same. I just do not have a template or installation instructions specific to a 4x4 frame. I still have not had time with working 80 hrs/7days a week every week. Member Les Otte has posted the necessary dimensions in his build thread here.

http://www.67-72chevytrucks.com/vboa...=632508&page=6
Thank you,
Tim
nbrfd007 is offline   Reply With Quote
Old 01-13-2017, 09:40 PM   #697
new62
Registered User
 
Join Date: Mar 2016
Location: richmond, ky
Posts: 4
Re: Power Steering Adapter Plates

Captainfab,
I would like to purchase a steering box adapter plate for my 65. Send me the payment info and send it your way.
Thanks
new62 is offline   Reply With Quote
Old 01-14-2017, 12:31 AM   #698
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
Re: Power Steering Adapter Plates

I will send you a PM.

Quote:
Originally Posted by new62 View Post
Captainfab,
I would like to purchase a steering box adapter plate for my 65. Send me the payment info and send it your way.
Thanks
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 02-01-2017, 02:36 PM   #699
andytobinskb
Registered User
 
Join Date: Jan 2016
Location: Edinboro Pa
Posts: 13
Re: Power Steering Adapter Plates

Hello I was wondering if this bracket or one that you make would work for my 1968 4x4. My frame does not have any dimples or a bend in the frame it is just flat. Thanks in advance for your help.
andytobinskb is offline   Reply With Quote
Old 02-02-2017, 12:55 AM   #700
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
Re: Power Steering Adapter Plates

I have sold many of my steering box adapter plates to customers that have installed them on their '60-'68 K series frames. I just do not have installation instructions or a template specific to the K series. However we have the very good detailed info in this build thread to help you get the steering box correctly located.


http://www.67-72chevytrucks.com/vboa...632508&page=6t


Quote:
Originally Posted by andytobinskb View Post
Hello I was wondering if this bracket or one that you make would work for my 1968 4x4. My frame does not have any dimples or a bend in the frame it is just flat. Thanks in advance for your help.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:21 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com