TX WTB - Front lower hood corners

[AngryPirate]

Mine are rotten and it looks like a separate panel that is spot welded in.

Nobody seems to make these patch panels.

It also appears that, that section is the same on all 60-66 hoods.

If someone has a hood that is trashed but still has those corners in good condition, perhaps they can cut them out before the weld points and I can do the delicate work of separating them from the other part of the hood.

Thanks,
Scott

note: it looks like I stole a picture of markeb01 truck..it's what came up on google images.

[LT1 Burb]

I have a 62-66 hood I can cut but I don't know if they are the same.

[AngryPirate]

Originally Posted by LT1 Burb

I have a 62-66 hood I can cut but I don't know if they are the same.

From what I can tell from photos, they are the same..but perhaps someone else can chime in on it.

If they are, I'd be most thankful if you cut them out before the seam and ship them my way.

Just let me know the parts cost/your effort + shipping to 78757.

Thanks!
Posted via Mobile Device

[1960chevypanel]

I might have a 60-61 GMC hood that I can cut up. Can you mask off the exact sections you need and post pics?

[AngryPirate]

Originally Posted by 1960chevypanel

I might have a 60-61 GMC hood that I can cut up. Can you mask off the exact sections you need and post pics?

both sides of these, but before the seams, so I can clean up the seams here.

Thanks!

[LT1 Burb]

I will cut them out this week if needed but they look rounder.

[AngryPirate]

Originally Posted by LT1 Burb

I will cut them out this week if needed but they look rounder.

Ugh....you might be right. Mine seem to be different, if I remember, they are actually their own autonomous pieces. :-/

I guess I'm limited to 60-61 "eyebrow" hoods (or whatever the nickname is).

Thanks for looking LT1Burb!

I guess I can defer to 1960chevypanel...if his donor hood is of the eyebrow variety.

[AngryPirate]

Originally Posted by LT1 Burb

I will cut them out this week if needed but they look rounder.

Also, LT1Burb, if you went to the trouble of cutting those pieces out already, man, thanks a bunch. I apologize that I didn't know they were different.

- Scott

[LT1 Burb]

Originally Posted by AngryPirate

Also, LT1Burb, if you went to the trouble of cutting those pieces out already, man, thanks a bunch. I apologize that I didn't know they were different.

- Scott

I didn't but no worries, I have a couple of these fronts as I used a repop on mine.

[1960chevypanel]

Originally Posted by AngryPirate

both sides of these, but before the seams, so I can clean up the seams here.

Thanks!

Ok gotcha. Working around some rain here this weekend but will try to check tomorrow.

[1960chevypanel]

Here's what I came up with:

[AngryPirate]

Originally Posted by 1960chevypanel

Here's what I came up with:

Man, those are exactly what I'm looking for.

Just don't cut into those hoods....shortstep60 PM'd me and cut a pair out yesterday.

I was actually coming on here today to tell you that.

Thanks for looking though. Super appreciated.