Warn Hubs, fusible links? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ryan68 · 03-28-2004, 02:25 PM

I recently locked my front axle(Dana 44) and of course am starting to break stuff, which is no big deal. But recently I broke a hub. I know I have the Warn hub with fusible links, but I have no idea what that is exactly except that the hub will break before something else does. If I take it apart, what should I look for, and how do I fix this? Do I just get a whole new hub, or can I get a new fusible link and fix it?

-Thanks

chevy blazer guy · 03-28-2004, 11:12 PM

Take the crome cap off the outside and there should be a screw that holds the center of the hub from sliding out. take the screw out and whats left of the fuse should come out. Cleen all the broken peices out of the inside of the hub and put new fuse in and that should get you going.

ryan68 · 03-29-2004, 01:35 AM

Thanks, I kinda started to do that when I knew it broke, but I the little screw was kinda stripped, that has to be a bad sign too. I'll get it out, gotta see the carnage, HAHA.

chevy blazer guy · 03-29-2004, 10:30 PM

Gotta love carnage! I dont have the fuses in mine and i break axels and u-joints quite alot lucky i have a winch makes life alot easier when it happens.

Bye Dave

03-28-2004, 02:25 PM	#1
ryan68 Certified Chevy Man Join Date: Jan 2000 Location: Tucson, Arizona, United States Posts: 2,053	Warn Hubs, fusible links? I recently locked my front axle(Dana 44) and of course am starting to break stuff, which is no big deal. But recently I broke a hub. I know I have the Warn hub with fusible links, but I have no idea what that is exactly except that the hub will break before something else does. If I take it apart, what should I look for, and how do I fix this? Do I just get a whole new hub, or can I get a new fusible link and fix it? -Thanks __________________ 68 Chevy CST (327,TH400) 3/5 drop lots of fun stuff 71 Suburban 4x4 (350,TH350) 7" lift 37's, D44/14 bolt and other sorts of goodies, lockers front and rear, flexes 40", 895 RTI score Check out my web site!!! http://www.geocities.com/cst68chevy/

03-29-2004, 01:35 AM	#3
ryan68 Certified Chevy Man Join Date: Jan 2000 Location: Tucson, Arizona, United States Posts: 2,053	Thanks, I kinda started to do that when I knew it broke, but I the little screw was kinda stripped, that has to be a bad sign too. I'll get it out, gotta see the carnage, HAHA. __________________ 68 Chevy CST (327,TH400) 3/5 drop lots of fun stuff 71 Suburban 4x4 (350,TH350) 7" lift 37's, D44/14 bolt and other sorts of goodies, lockers front and rear, flexes 40", 895 RTI score Check out my web site!!! http://www.geocities.com/cst68chevy/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-28-2004, 11:12 PM	#2
chevy blazer guy Registered User Join Date: Dec 2003 Location: Ravenna Mi Posts: 22	Take the crome cap off the outside and there should be a screw that holds the center of the hub from sliding out. take the screw out and whats left of the fuse should come out. Cleen all the broken peices out of the inside of the hub and put new fuse in and that should get you going.

03-29-2004, 10:30 PM	#4
chevy blazer guy Registered User Join Date: Dec 2003 Location: Ravenna Mi Posts: 22	Gotta love carnage! I dont have the fuses in mine and i break axels and u-joints quite alot lucky i have a winch makes life alot easier when it happens. Bye Dave



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.