fuel cell sending units - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71chevylongbed · 03-28-2004, 07:37 PM

what kind of sending unit should i put in the fuel cell i am making?

sneakysnake · 03-28-2004, 08:22 PM

I read in previous posts that it should read 0-90 ohms, but you might do a search on the subject

71chevylongbed · 03-28-2004, 09:05 PM

would one of the universal ones from schucks or napa work alright?

cableguy0 · 03-28-2004, 11:27 PM

you need a 0-90ohm gm sending unit most aftermarkets are 0-90-ohm gm style

03-28-2004, 07:37 PM	#1
71chevylongbed Got Horsepower? Join Date: Sep 2003 Location: IDAHO Posts: 406	fuel cell sending units what kind of sending unit should i put in the fuel cell i am making? __________________ 2001 Dodge 2500 Cummins, 4 inch lift, 35" Toyo MT's on Ultra wheels, P-Pump Conversion, AFE intake, Fass, 5 inch exhaust, Pyro,Boost,and Fuel pressure guages, and a whole bunch of other stuff "The Money Pit" SOLD-71 Chevy C10 long bed- 2/4 drop-- 350,th400, Edelbrock performer RPM intake,Edelbrock 600 CFM carb,Crower 240 cam,port and polish,Dynomax headers,HEI ignition,dual 2.5 inch exhaust with Flowmaster 50 series mufflers

03-28-2004, 09:05 PM	#3
71chevylongbed Got Horsepower? Join Date: Sep 2003 Location: IDAHO Posts: 406	would one of the universal ones from schucks or napa work alright? __________________ 2001 Dodge 2500 Cummins, 4 inch lift, 35" Toyo MT's on Ultra wheels, P-Pump Conversion, AFE intake, Fass, 5 inch exhaust, Pyro,Boost,and Fuel pressure guages, and a whole bunch of other stuff "The Money Pit" SOLD-71 Chevy C10 long bed- 2/4 drop-- 350,th400, Edelbrock performer RPM intake,Edelbrock 600 CFM carb,Crower 240 cam,port and polish,Dynomax headers,HEI ignition,dual 2.5 inch exhaust with Flowmaster 50 series mufflers

03-28-2004, 11:27 PM	#4
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	you need a 0-90ohm gm sending unit most aftermarkets are 0-90-ohm gm style __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-28-2004, 08:22 PM	#2
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	I read in previous posts that it should read 0-90 ohms, but you might do a search on the subject



Register or Log In To remove these advertisements.