can i do this? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68chevy · 01-02-2002, 07:26 PM

can i do this without having problems

68chevy · 01-02-2002, 07:33 PM

o yea i have 5 inch drop coils on it now and will use them after puttin in the notch if i can

[This message has been edited by 68chevy (edited 01-02-2002).]

NSANE68!!! · 01-03-2002, 02:04 PM

You can, but it's pointless. Look at where your rear axle tube is. It will definatly bottom out. You want the notch over the axle tube for added suspension travel.

------------------
68chevy, 95step bed, euro taillights, fastbags, fully shaved, phantom grill, 350 with a small huffer, TH350, 12bolt Auburn posi 4:11's////// 95 Chevy Tahoe (PHATHOE) all mouldings and emblems stripped, 4/4 drop, Niche Bellas 18's, billet grill, Euro taillights, clear corners, billet antena & wiper covers, leather interior, Pioneer cd, alpine amp, Rockford 15's////// 97 CBR 900 RR, everything that is aluminum was polished or powdercoated candy purple, 6 color change Chameleon paint at $300 a pint(ouch), custom one of a kind under seat exaust, hand cut decals, runs 11 flat at 126mph FUUUUUUUUUUUUUUN!!!!!!!! my toys at http://communities.msn.com/NSANE68Tr...s/shoebox.msnw

*Randy70C-10* · 01-05-2002, 11:35 AM

I had the same idea. Wonder if this would work:

lost wages · 01-06-2002, 06:11 PM

you could probably do it but whats the point? if you want to go that low you probably ought to be looking at air bags, if you really want a static drop use springs and a block with a notch.

------------------
68 swb fleet soon to be bagged and big block powered
68 lwb fleet in primer
35 chevy truck
97 dodge on 35 boggers
3 out of 4 aint bad!
Jefferson city, MO

*Randy70C-10* · 01-07-2002, 02:22 PM

Just going for a different approach. I could do all the work myself since I have the equipment and know-how, and wouldn't have to spend a dime.

01-02-2002, 07:26 PM	#1
68chevy Registered User Join Date: Sep 2001 Location: Pikeville, KY Posts: 277	can i do this? can i do this without having problems __________________ http://68chevy0.tripod.com/68stepside/ 68 Chevy c10 swb stepside 4/7 drop sbc 305 edlebrock performer camp/intake/600cfm ec carb 700r4 tranny 3:07 rear gears 17x8 eagle alloy wheels Pikeville,Kentucky

01-02-2002, 07:33 PM	#2
68chevy Registered User Join Date: Sep 2001 Location: Pikeville, KY Posts: 277	o yea i have 5 inch drop coils on it now and will use them after puttin in the notch if i can [This message has been edited by 68chevy (edited 01-02-2002).] __________________ http://68chevy0.tripod.com/68stepside/ 68 Chevy c10 swb stepside 4/7 drop sbc 305 edlebrock performer camp/intake/600cfm ec carb 700r4 tranny 3:07 rear gears 17x8 eagle alloy wheels Pikeville,Kentucky

01-03-2002, 02:04 PM	#3
NSANE68!!! SLICER AND DICIER Join Date: May 2001 Location: Quuen Creek Posts: 1,383	You can, but it's pointless. Look at where your rear axle tube is. It will definatly bottom out. You want the notch over the axle tube for added suspension travel. ------------------ 68chevy, 95step bed, euro taillights, fastbags, fully shaved, phantom grill, 350 with a small huffer, TH350, 12bolt Auburn posi 4:11's////// 95 Chevy Tahoe (PHATHOE) all mouldings and emblems stripped, 4/4 drop, Niche Bellas 18's, billet grill, Euro taillights, clear corners, billet antena & wiper covers, leather interior, Pioneer cd, alpine amp, Rockford 15's////// 97 CBR 900 RR, everything that is aluminum was polished or powdercoated candy purple, 6 color change Chameleon paint at $300 a pint(ouch), custom one of a kind under seat exaust, hand cut decals, runs 11 flat at 126mph FUUUUUUUUUUUUUUN!!!!!!!! my toys at http://communities.msn.com/NSANE68Tr...s/shoebox.msnw __________________ 01 Tahoe 22's 2/4 drop and tv's 68 chevy money pit 51 chevy belair 95 Honda 900RR 05 GMC Siearra (company truck)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-05-2002, 11:35 AM	#4
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	I had the same idea. Wonder if this would work:

01-06-2002, 06:11 PM	#5
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	you could probably do it but whats the point? if you want to go that low you probably ought to be looking at air bags, if you really want a static drop use springs and a block with a notch. ------------------ 68 swb fleet soon to be bagged and big block powered 68 lwb fleet in primer 35 chevy truck 97 dodge on 35 boggers 3 out of 4 aint bad! Jefferson city, MO

01-07-2002, 02:22 PM	#6
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Just going for a different approach. I could do all the work myself since I have the equipment and know-how, and wouldn't have to spend a dime.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.