Fuel filler neck hose diameter

[Hart_Rod]

Does any one know the factory fuel filler neck diameter and where's a good place to purchase the rubber fuel hose that matches it? TIA

[notchbackgta]

I just got some fuel filler hose from Rock Auto. I have some left over, but I think the bigger size for the square body tank. I got a 90 degree elbow for our size neck and then a reducer bushing, then the bigger straight hose.
https://www.rockauto.com/en/tools/ho...r+hose,1001643

[Hart_Rod]

Originally Posted by notchbackgta

I just got some fuel filler hose from Rock Auto. I have some left over, but I think the bigger size for the square body tank. I got a 90 degree elbow for our size neck and then a reducer bushing, then the bigger straight hose.
https://www.rockauto.com/en/tools/ho...r+hose,1001643

For some reason I'm thinking it's 1.25", but I don't want to pull it off until I have the right part to replace it, .

[Mr_Rich]

I found this place in a search several years ago. I dropped the tank in my '89 to replace the fuel pump and the hose was unusable because it became rock-hard and impossible to work with.
Try http://www.fillernecksupply.com/
I was able to get a section of new hose that worked for me.

[Hart_Rod]

Originally Posted by Mr_Rich

I found this place in a search several years ago. I dropped the tank in my '89 to replace the fuel pump and the hose was unusable because it became rock-hard and impossible to work with.
Try http://www.fillernecksupply.com/
I was able to get a section of new hose that worked for me.

Thanks! Will check them out.

[HO455]

I did the one on my 67 it was 1 3/8" hose ans was seven inches long. Had to order a foot to get it from a local parts house. It took a day to get here. I am assuming you mean this hose?

[Hart_Rod]

Originally Posted by HO455

I did the one on my 67 it was 1 3/8" hose ans was seven inches long. Had to order a foot to get it from a local parts house. It took a day to get here. I am assuming you mean this hose?

I measured mine last night and that's the number I came up with. Thanks for checking! I think I'm going to buy this:

https://www.fillernecksupply.com/car...5-7171635ad219

[PortHeadlight]

Unless you are in a hurry, i have some new Gates 1 3/8 gas filler hose (GAT 24702). I can easily send you a long enough piece in a small USPS box.... no charge.

[Hart_Rod]

Originally Posted by PortHeadlight

Unless you are in a hurry, i have some new Gates 1 3/8 gas filler hose (GAT 24702). I can easily send you a long enough piece in a small USPS box.... no charge.

Thanks Brother, you're too kind!!! I picked up some last night, but I can't thank you enough for all of your help !

[Llay R. Rac]

any chance a guy with a '65 could get 4 inches of that 1 3/8th?
mine is toast and i would gladly pay postage.

[PortHeadlight]

Happy to. pm me your address and exact length you want cut and I'll send it off to you on Monday...

[Llay R. Rac]

Pm sent , I thank you.