Turn Signal Harness Terminal Part # Help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**samkost** · 08-10-2017, 06:11 PM

A little help here please Guys,
I first posted in the Electrical Forum a while back but I still need some help.
Without going into all the details ....

I discovered another surprise of shoddy workmanship by my restoration shop from Hell

I have a couple of broken wires separated from their crimped terminals on my 1972 C10 Tilt Column Turn Signal Harness.
I have gone to NAPA, looked through their catalogue but they were not helpful in identifying this style of terminal.
I then called AAW and they have a non OE flat style connector kit but not the crimp terminals separately.
I have emailed http://www.repairconnector.com/ and am waiting to see if they have replacement connectors.
Again these are the male terminals that snap fit inside the half moon connector on the steering column harness side.
Does anyone have a specific reference name or OE part number of this wire terminal?
I guess the worst case scenario would be to tear into the column again and replace the turn signal harness for the second time.
I appreciate any help to locate some of these.
Thanks, Sam

**LockDoc** · 08-10-2017, 10:17 PM

-
They are called "Twin Lock Terminals" and are available here.

http://www.mouser.com/ProductDetail/...Euq7Cedqnns%3d

LockDoc

**samkost** · 08-10-2017, 10:45 PM

Many thanks LocDoc.

08-10-2017, 06:11 PM	#1
samkost Senior Member Join Date: Sep 2014 Location: Lake Tapps, Wa. Posts: 674	Turn Signal Harness Terminal Part # Help A little help here please Guys, I first posted in the Electrical Forum a while back but I still need some help. Without going into all the details .... I discovered another surprise of shoddy workmanship by my restoration shop from Hell I have a couple of broken wires separated from their crimped terminals on my 1972 C10 Tilt Column Turn Signal Harness. I have gone to NAPA, looked through their catalogue but they were not helpful in identifying this style of terminal. I then called AAW and they have a non OE flat style connector kit but not the crimp terminals separately. I have emailed http://www.repairconnector.com/ and am waiting to see if they have replacement connectors. Again these are the male terminals that snap fit inside the half moon connector on the steering column harness side. Does anyone have a specific reference name or OE part number of this wire terminal? I guess the worst case scenario would be to tear into the column again and replace the turn signal harness for the second time. I appreciate any help to locate some of these. Thanks, Sam Attached Images

08-10-2017, 10:17 PM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,772	Re: Turn Signal Harness Terminal Part # Help - They are called "Twin Lock Terminals" and are available here. http://www.mouser.com/ProductDetail/...Euq7Cedqnns%3d LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

08-10-2017, 10:45 PM	#3
samkost Senior Member Join Date: Sep 2014 Location: Lake Tapps, Wa. Posts: 674	Re: Turn Signal Harness Terminal Part # Help Many thanks LocDoc.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.