72 Blazer Bedsides - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Schredder83 · 01-09-2018, 08:53 PM

I have both driver and passenger bedside, they are rusty on the lower portion, bottoms of the B pillar, and a dent in the driver rear. Looking for some input if these are useful for anyone still and if so what they’d be worth. Thanks.

Schredder83 · 01-12-2018, 07:51 PM

I thought they may be useful to somebody but maybe they’re just scrap.

**richard2717** · 01-13-2018, 09:11 AM

I would not scrap them if you have room for storing it. There are quite a bit of usable pcs in the pics I see. Guys are always looking for cuts if you are willing to ship. Those are probably not worth it to someone to ship the whole side but the tail light sections and other areas would be a lot less costly to ship. Same goes with the floor of the tub if you are getting rid of that. The seat brace and floor cuts usually sell pretty easy. Pricing would depend on how big an area. I normally start at $25 and up plus shipping on cuts

Richard

01-09-2018, 08:53 PM	#1
Schredder83 Registered User Join Date: Oct 2017 Location: Wichita, Ks Posts: 9	72 Blazer Bedsides I have both driver and passenger bedside, they are rusty on the lower portion, bottoms of the B pillar, and a dent in the driver rear. Looking for some input if these are useful for anyone still and if so what they’d be worth. Thanks. Attached Images

01-12-2018, 07:51 PM	#2
Schredder83 Registered User Join Date: Oct 2017 Location: Wichita, Ks Posts: 9	Re: 72 Blazer Bedsides I thought they may be useful to somebody but maybe they’re just scrap.

01-13-2018, 09:11 AM	#3
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 Blazer Bedsides I would not scrap them if you have room for storing it. There are quite a bit of usable pcs in the pics I see. Guys are always looking for cuts if you are willing to ship. Those are probably not worth it to someone to ship the whole side but the tail light sections and other areas would be a lot less costly to ship. Same goes with the floor of the tub if you are getting rid of that. The seat brace and floor cuts usually sell pretty easy. Pricing would depend on how big an area. I normally start at $25 and up plus shipping on cuts Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.