Youtube Channels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**68SWB4x4** · 01-17-2018, 03:52 PM

Who else here has youtube channels for their trucks or ones they like to follow

here is mine if you'd like to subscribe My Youtube Channel

**Grumpy old man** · 01-17-2018, 04:30 PM

You can also use a shop rag /old t-shirt to slide in behind the door handles to remove the clips . The material will catch the end of the clip and pop them right off .

**68SWB4x4** · 01-17-2018, 05:13 PM

Quote:

Originally Posted by Grumpy old man

You can also use a shop rag /old t-shirt to slide in behind the door handles to remove the clips . The material will catch the end of the clip and pop them right off .

Thanks for the tip!

**Jcfcamaro** · 01-17-2018, 07:44 PM

I have one under my name. Jared Freemyer

1SG.Rob · 01-17-2018, 08:31 PM

Subbed, I need to do this next weekend.

harpo231 · 01-17-2018, 08:47 PM

Quote:

Originally Posted by Grumpy old man

You can also use a shop rag /old t-shirt to slide in behind the door handles to remove the clips . The material will catch the end of the clip and pop them right off .

you should make a video !

**special-K** · 01-18-2018, 02:03 AM

I just bought the tool and figured out how to use it without You Tube, since that did not yet exist. I always pop the clip back on the handle right away so it doesn't get lost. The old rag trick also works like a charm. CAUTION! Watch for flying clips! Very easy to lose those things

NC_John · 01-18-2018, 08:03 AM

Quote:

Originally Posted by special-K

I just bought the tool and figured out how to use it without You Tube, since that did not yet exist.

I was reminiscing about this early this week with a vendor. It was a decade before any kind of access to the internet when i was messing with my first project car (67 camaro). I had one local parts dealer and everything else was in magazines and by phone. Sure was a different game back then.

And yeah, i like the rag better too - it wont scratch the door panel.

beaterku · 01-18-2018, 11:23 AM

I've had one forever and just recently started uploading semi-consistently with content from my builds.

https://www.youtube.com/user/beaterku

68Stepbed · 01-18-2018, 01:51 PM

Mine

https://www.youtube.com/channel/UCDP..._as=subscriber

**Dieselwrencher** · 01-18-2018, 07:47 PM

I need to buy a gopro and start a channel. I watched stuff like FlyingSparksGarage and realized how much stuff we missed out on by not doing this years ago. Oh well.

luke1968c10 · 01-18-2018, 08:54 PM

I have one and I'm in the process of doing a full restoration on my 68 Chevy right now. It's not going to be a pro job but She's coming along pretty good so far. Here is a link to the playlist on my channel>>>https://www.youtube.com/watch?v=ySy1...UidY1fcmQ5xtAL

**Ironangel** · 01-18-2018, 09:21 PM

Not my channel but one of the board members took this video of me and "Nasty Sally" winning a burnout contest at the Midwest Truck Nationals a couple of years ago... https://youtu.be/_jXxaOqm36M?t=1m19s

**special-K** · 01-19-2018, 07:49 AM

Quote:

Originally Posted by Dieselwrencher

I need to buy a gopro and start a channel. I watched stuff like FlyingSparksGarage and realized how much stuff we missed out on by not doing this years ago. Oh well.

Same here. From videos of nice drives to events, to action, to repair/rebuild instructions, to parts ID, and on. I'd like to give it a shot. Plus, I always used Photobucket to show my videos here and now that is useless. So I need a way to show videos onlne anyway.

**68SWB4x4** · 01-19-2018, 02:24 PM

Quote:

Originally Posted by luke1968c10

I have one and I'm in the process of doing a full restoration on my 68 Chevy right now. It's not going to be a pro job but She's coming along pretty good so far. Here is a link to the playlist on my channel>>>https://www.youtube.com/watch?v=ySy1...UidY1fcmQ5xtAL

Subscribed, Will be checking out the playlist

**68SWB4x4** · 01-19-2018, 02:25 PM

Quote:

Originally Posted by Grumpy old man

You can also use a shop rag /old t-shirt to slide in behind the door handles to remove the clips . The material will catch the end of the clip and pop them right off .

Had to try the rag trick and it worked really well. Pretty cool

**Dieselwrencher** · 01-19-2018, 03:38 PM

Quote:

Originally Posted by special-K

Same here. From videos of nice drives to events, to action, to repair/rebuild instructions, to parts ID, and on. I'd like to give it a shot. Plus, I always used Photobucket to show my videos here and now that is useless. So I need a way to show videos onlne anyway.

Same here. We used to travel all over racing the corvette. There was all kinds of late night thrashing and madness everywhere. I missed that boat.

beaterku · 02-18-2018, 10:15 PM

Just uploaded a new video on the leaf spring to coil spring conversion on my truck. Slowly but surely, I am getting there!

https://youtu.be/gyM_SIwGh4g

Thanks all!

ericfallon · 02-19-2018, 05:53 AM

Quote:

Originally Posted by Dieselwrencher

I need to buy a gopro and start a channel. I watched stuff like FlyingSparksGarage and realized how much stuff we missed out on by not doing this years ago. Oh well.

Doesn't hurt that she is easy on the eyes either.
yummy.

**special-K** · 02-19-2018, 09:34 AM

Is there a way to get a video off of Photobucket (mine) so I can put it on You Tube? I don't think I can directly but getting them back into my computer is what I'm after. Not allowing me to share is one thing, but if I can't even have my own pictures that truly is a ransom situation.

**68SWB4x4** · 03-21-2018, 11:59 AM

Quote:

Originally Posted by beaterku

Just uploaded a new video on the leaf spring to coil spring conversion on my truck. Slowly but surely, I am getting there!

https://youtu.be/gyM_SIwGh4g

Thanks all!

Been enjoying your channel.

**68SWB4x4** · 03-21-2018, 12:00 PM

Quote:

Originally Posted by special-K

Is there a way to get a video off of Photobucket (mine) so I can put it on You Tube? I don't think I can directly but getting them back into my computer is what I'm after. Not allowing me to share is one thing, but if I can't even have my own pictures that truly is a ransom situation.

Like most anything there is a youtube video on it.

Hopefully it works https://www.youtube.com/watch?v=tWCtp2VTm_s

beaterku · 03-21-2018, 12:01 PM

Quote:

Originally Posted by 68SWB4x4

Been enjoying your channel.

Thank you! I really do appreciate it. It's actually been pretty neat documenting it it some sort of logical order. What is killing me is how slow the project is going, but I am hopeful to pick up steam now that it's basically a bolt on affair from hear on.

**special-K** · 03-21-2018, 12:43 PM

Quote:

Originally Posted by 68SWB4x4

Like most anything there is a youtube video on it.

Hopefully it works https://www.youtube.com/watch?v=tWCtp2VTm_s

Thanks, I'll check it out. Checking online is still second nature to me. Yet, I pull up stuff with a few clicks that people ask me "How did you find that?" all the time. Not sure why it never occured to check the very source for "lessons" online. And, this thing I need to do is totally You Tube related! Thanks again

**68SWB4x4** · 03-21-2018, 01:28 PM

Quote:

Originally Posted by beaterku

Thank you! I really do appreciate it. It's actually been pretty neat documenting it it some sort of logical order. What is killing me is how slow the project is going, but I am hopeful to pick up steam now that it's basically a bolt on affair from hear on.

Rivets are a nightmare it takes forever. I remember all to well when I did the lift on my Suburban....

That was almost 10 years at this point to and it still isn't on the road so at least your progress isn't that slow haha

01-17-2018, 03:52 PM	#1
68SWB4x4 Strongman Garage Join Date: Apr 2000 Location: Salinas, CA Posts: 10,241	Youtube Channels Who else here has youtube channels for their trucks or ones they like to follow here is mine if you'd like to subscribe My Youtube Channel __________________ Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE Last edited by 68SWB4x4; 02-10-2019 at 01:06 AM.

01-17-2018, 04:30 PM	#2
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Youtube Channels You can also use a shop rag /old t-shirt to slide in behind the door handles to remove the clips . The material will catch the end of the clip and pop them right off .

01-17-2018, 07:44 PM	#4
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,049	Re: Youtube Channels I have one under my name. Jared Freemyer

01-17-2018, 08:31 PM	#5
1SG.Rob Registered User Join Date: May 2017 Location: Vancouver, WA Posts: 87	Re: Youtube Channels Subbed, I need to do this next weekend.

01-18-2018, 02:03 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Youtube Channels I just bought the tool and figured out how to use it without You Tube, since that did not yet exist. I always pop the clip back on the handle right away so it doesn't get lost. The old rag trick also works like a charm. CAUTION! Watch for flying clips! Very easy to lose those things __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 02-19-2018 at 09:26 AM.

01-18-2018, 11:23 AM	#9
beaterku Registered User Join Date: Mar 2013 Location: Lenexa, KS Posts: 547	Re: Youtube Channels I've had one forever and just recently started uploading semi-consistently with content from my builds. https://www.youtube.com/user/beaterku

01-18-2018, 01:51 PM	#10
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: Youtube Channels Mine https://www.youtube.com/channel/UCDP..._as=subscriber __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

01-18-2018, 07:47 PM	#11
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Youtube Channels I need to buy a gopro and start a channel. I watched stuff like FlyingSparksGarage and realized how much stuff we missed out on by not doing this years ago. Oh well. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-18-2018, 08:54 PM	#12
luke1968c10 Registered User Join Date: Oct 2013 Location: hindman ky Posts: 40	Re: Youtube Channels I have one and I'm in the process of doing a full restoration on my 68 Chevy right now. It's not going to be a pro job but She's coming along pretty good so far. Here is a link to the playlist on my channel>>>https://www.youtube.com/watch?v=ySy1...UidY1fcmQ5xtAL

01-18-2018, 09:21 PM	#13
Ironangel Senior Member Join Date: Feb 2010 Location: Falls City, Nebraska "100 Miles From Nowhere" Posts: 2,219	Re: Youtube Channels Not my channel but one of the board members took this video of me and "Nasty Sally" winning a burnout contest at the Midwest Truck Nationals a couple of years ago... https://youtu.be/_jXxaOqm36M?t=1m19s __________________ Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American"

02-18-2018, 10:15 PM	#18
beaterku Registered User Join Date: Mar 2013 Location: Lenexa, KS Posts: 547	Re: Youtube Channels Just uploaded a new video on the leaf spring to coil spring conversion on my truck. Slowly but surely, I am getting there! https://youtu.be/gyM_SIwGh4g Thanks all!

02-19-2018, 09:34 AM	#20
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Youtube Channels Is there a way to get a video off of Photobucket (mine) so I can put it on You Tube? I don't think I can directly but getting them back into my computer is what I'm after. Not allowing me to share is one thing, but if I can't even have my own pictures that truly is a ransom situation. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.