Question for guys running GM Transport wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Drummerboy · 03-10-2018, 10:25 PM

Am I correct in saying that you have to run spacers, in order to bolt Transport wheels to a stock 67-72 Chevy? Or, any 6x505 vintage truck?

Janz99 · 03-10-2018, 11:11 PM

I'm in the middle of mounting a set on my truck. The fronts fit great without a spacer, but the rears definitely need either a spacer or an offset change. I've chosen to change the offset over run spacers.

I have four wheel drums, the transports needed the locating bore opened up to fit. I made them up hubcentric but you could over enlarge and have them lugcentric.

Hope this helps.

03-10-2018, 10:25 PM	#1
Drummerboy Registered User Join Date: Dec 2010 Location: Sherwood, Arkansas Posts: 156	Question for guys running GM Transport wheels Am I correct in saying that you have to run spacers, in order to bolt Transport wheels to a stock 67-72 Chevy? Or, any 6x505 vintage truck?

03-10-2018, 11:11 PM	#2
Janz99 Registered User Join Date: Feb 2017 Location: Winnipeg Posts: 64	Re: Question for guys running GM Transport wheels I'm in the middle of mounting a set on my truck. The fronts fit great without a spacer, but the rears definitely need either a spacer or an offset change. I've chosen to change the offset over run spacers. I have four wheel drums, the transports needed the locating bore opened up to fit. I made them up hubcentric but you could over enlarge and have them lugcentric. Hope this helps.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.