WTB: Hurst Shifter handle as shown here..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ts71281 · 05-03-2004, 08:01 AM

I'm looking to buy a hurst shifter handle as shown here. I just put my M-20 in my 70 C10 this weekend and the shifter handle I have doesn't fit right.

Thanks!

Joe

**Palf70Step** · 05-03-2004, 01:01 PM

Is the linkages on the M20 stock or did you add Hurst? I'm pretty sure that any Hurst handle will interchange with their linkages. Sounds like you might have the stock Muncie linkages and far as I know you would be limited to a muncie shifter handle. Many mooms ago I ran across that same problem when I put the muncie in my 55. Thouth I could just swap handles, but ended having tobuy the shifter anyways just to get the linkages I needed.

ts71281 · 05-03-2004, 01:28 PM

I actually am using a hurst competition plus shifter on my Muncie. Any hurst handle will work that has the 2 holes in the bottom. However, I am having a hard time finding one that doesn't touch the seat in 2nd or 4th. The shifter pic I used is from RaceDvl's truck. Hope you don't mind I use your pics

I just want the same handle.

Joe

05-03-2004, 08:01 AM	#1
ts71281 Registered User Join Date: Apr 2003 Location: Maple Grove, MN Posts: 497	WTB: Hurst Shifter handle as shown here..... I'm looking to buy a hurst shifter handle as shown here. I just put my M-20 in my 70 C10 this weekend and the shifter handle I have doesn't fit right. Thanks! Joe Attached Images

05-03-2004, 01:01 PM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Is the linkages on the M20 stock or did you add Hurst? I'm pretty sure that any Hurst handle will interchange with their linkages. Sounds like you might have the stock Muncie linkages and far as I know you would be limited to a muncie shifter handle. Many mooms ago I ran across that same problem when I put the muncie in my 55. Thouth I could just swap handles, but ended having tobuy the shifter anyways just to get the linkages I needed. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-03-2004, 01:28 PM	#3
ts71281 Registered User Join Date: Apr 2003 Location: Maple Grove, MN Posts: 497	I actually am using a hurst competition plus shifter on my Muncie. Any hurst handle will work that has the 2 holes in the bottom. However, I am having a hard time finding one that doesn't touch the seat in 2nd or 4th. The shifter pic I used is from RaceDvl's truck. Hope you don't mind I use your pics I just want the same handle. Joe



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.