Are all 6-250 power steering brackets the same? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DHregdovic · 04-03-2002, 09:14 AM

I've got my front end apart on my '67 right now to replace ball joints, springs, steering linkage right now. I have a power steering gear box but not the pump. Are all the 6-250 setups the same? I called the locaal boneyard and they said they woould sell me a pump and brackets for $35.00 - sounded pretty good to me.

I also know about the frame notch too. Is it easier to put a notch in my frame for the gearbox or make a 1/4" thick spacer for under it?

71402BB · 04-03-2002, 10:10 AM

I'm not sure if there all the same but I do know that the brackets out of some cars (like a Camero) will work!

------------------
71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's

72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!)

68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi

Brad · 04-03-2002, 02:26 PM

There's no 'e' in Camaro!

------------------
WOU in Monmouth, Or
68 Camaro,250(No,I'm not putting in a 350!)
67,LWB,250(Again, I'm not putting in a 350!)
a work in progress
"Praise The Lowered"

chevytruck68 · 04-03-2002, 05:05 PM

most of the 6 cylinder 250 mounts are the same but the later model integral head engines the mounting to the head is different and wont work on the older non integral head engine they changed like around 78 i think

boilrman · 04-03-2002, 06:22 PM

I took the pump and bracket for my I6 out of a 72 nova

------------------
1971 Chevy 1/2t, 350 -- SOLD
1998 Yamaha V-Star 650
1970 Chevy 3/4t, I6(freshly rebuilt), 4 speed
Keokuk,IA

http://communities.msn.com/SchweringFamily/shoebox.msnw

MSN Messenger = boilrman
Find a job you love and you'll never have to work a day in your life.

photoglg · 04-03-2002, 08:10 PM

I got mine out of 73 Nova. Bracket is right, but I am having trouble with the pulley alinement. It was about 1/2" off from the fan and crank pulley on my 250 two grove. Got another pump that lined up right. Now the belt is hiting the nut on the alt pulley. What did you mean about the notch? I got a box out on a 71, are you saying I still have to mods?

------------------

DHregdovic · 04-04-2002, 08:22 PM

Does anybody know if the integral head type bracket can be made to fit? I've called around and cannot seem to find any non-integral head type power steering brackets.

04-03-2002, 09:14 AM	#1
DHregdovic Registered User Join Date: Jan 2002 Location: Beaver County, PA Posts: 46	Are all 6-250 power steering brackets the same? I've got my front end apart on my '67 right now to replace ball joints, springs, steering linkage right now. I have a power steering gear box but not the pump. Are all the 6-250 setups the same? I called the locaal boneyard and they said they woould sell me a pump and brackets for $35.00 - sounded pretty good to me. I also know about the frame notch too. Is it easier to put a notch in my frame for the gearbox or make a 1/4" thick spacer for under it? __________________ 67 LWB GMC 250 inline w/4spd manual Disc/power brake conversion

04-03-2002, 10:10 AM	#2
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	I'm not sure if there all the same but I do know that the brackets out of some cars (like a Camero) will work! ------------------ 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

04-03-2002, 02:26 PM	#3
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,672	There's no 'e' in Camaro! ------------------ WOU in Monmouth, Or 68 Camaro,250(No,I'm not putting in a 350!) 67,LWB,250(Again, I'm not putting in a 350!) a work in progress "Praise The Lowered" __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

04-03-2002, 05:05 PM	#4
chevytruck68 Registered User Join Date: Jan 2000 Location: greencastle pa usa Posts: 181	most of the 6 cylinder 250 mounts are the same but the later model integral head engines the mounting to the head is different and wont work on the older non integral head engine they changed like around 78 i think __________________ 68 chevy 2wd long step lowered 67 chevy 3/4 4x4 83 gmc suburban 350 od auto 3 in body lift

04-03-2002, 06:22 PM	#5
boilrman 70 Chevy 3/4t Join Date: Sep 2000 Location: Kokomo,IN USA Posts: 1,230	I took the pump and bracket for my I6 out of a 72 nova ------------------ 1971 Chevy 1/2t, 350 -- SOLD 1998 Yamaha V-Star 650 1970 Chevy 3/4t, I6(freshly rebuilt), 4 speed Keokuk,IA http://communities.msn.com/SchweringFamily/shoebox.msnw MSN Messenger = boilrman Find a job you love and you'll never have to work a day in your life. __________________ Find a job you love and you'll never have to work a day in your life. 1998 Yamaha V-Star 650 1970 Chevy 3/4t, I6 (rebuilt), 4 speed Kokomo,IN

04-03-2002, 08:10 PM	#6
photoglg Registered User Join Date: Jul 2001 Location: Oxnard, CA Posts: 143	I got mine out of 73 Nova. Bracket is right, but I am having trouble with the pulley alinement. It was about 1/2" off from the fan and crank pulley on my 250 two grove. Got another pump that lined up right. Now the belt is hiting the nut on the alt pulley. What did you mean about the notch? I got a box out on a 71, are you saying I still have to mods? ------------------ __________________ 1969 GMC S/B S/S 3" drop

04-04-2002, 08:22 PM	#7
DHregdovic Registered User Join Date: Jan 2002 Location: Beaver County, PA Posts: 46	Does anybody know if the integral head type bracket can be made to fit? I've called around and cannot seem to find any non-integral head type power steering brackets. __________________ 67 LWB GMC 250 inline w/4spd manual Disc/power brake conversion

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.