|
05-04-2004, 11:46 AM
|
#1 |
|
Registered User
Join Date: Jan 2004
Location: Camarillo, Ca
Posts: 79
|
Squeaky clutch
My clutch pedal has been squeaking recently. It sounds like it's coming from the spring area, but I see no problems at all and it only happens when I push it in all the way. I can hear a normal squeak and movement when I push it in, but at the extreme end of the push, it squeaks real band and makes a sort of grinding pop. Ideas?
__________________
1972 1/2 ton Chevy C10 V-8 350, crate engine, with Flomaster dual exhaust. She's Old Blue the Truckinator (no relation to Arnold  )
|
|
|
|
05-04-2004, 12:00 PM
|
#2 |
|
Registered User
Join Date: Feb 2003
Location: The Rubber City
Posts: 5,498
|
sounds like you need to lube the clutch linkage...get under the truck and put the grease gun on it, and pump until you see new grease come out. mine squeaked too, and after i did this it stopped. it also worked smoother, too.
__________________
1969 GMC K2500  1996 Honda Accord 2007 Kawasaki KLR 650 |
|
|
|
|
05-04-2004, 01:23 PM
|
#3 |
|
68 camtruck
Join Date: Mar 2000
Location: Harrison, Ohio USA
Posts: 233
|
Squeaky Clutch
It could be the Throw out bearing going bad. Is it sort of squeaky but can you feel a rubbing in the clutch pedal.
Charlie 
__________________
71 GMC Jimmy 4X4 68 Huger Orange Camaro 454 with TH400 :gmc: |
|
|
|
|
05-04-2004, 01:30 PM
|
#4 |
|
It's a catastrophic success.
 
Join Date: Jan 2003
Location: Oklahoma
Posts: 2,077
|
Does it sound like its inside or out? The clutch rod runs though the brake pedal mech, lube all that too and where the spring makes contact.
|
|
|
|
|
05-04-2004, 01:46 PM
|
#5 |
|
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
To add to sneakysnake, their should be two plastic bushings at either end of the shaft that connects the pedal to the rod that goes through the firewall.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm 
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
