Shopping for replacement longbed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hotwls13 · 05-24-2018, 03:39 PM

My rear corners (around taillights) are really rough. Lots of thick bondo (1/2” or more) covering rust and dents.

I think I prefer the steel floor but I’m open to wood floor too. I think the wood floors will likely needs lots of repair though and I’d like to keep the costs down.

Planning to put the bed on a flatbed trailer (sitting the bed on top of my gorilla garden cart during transport and to move around once I get it home).

budnikguy · 05-24-2018, 05:45 PM

67-72 beds are the same and will bolt up directly where your old one once resided, the tailgate is identical also.

hotwls13 · 05-24-2018, 06:09 PM

Quote:

Originally Posted by budnikguy

67-72 beds are the same and will bolt up directly where your old one once resided, the tailgate is identical also.

Ok cool glad to hear they are all the same. Thought I read somewhere that the tailgate hinges were different through the years. As for your bed, from the pics it looks like it’s in good shape. Riverside is a bit of a drive though. Gonna try local first. Thanks

**bigmac73** · 05-25-2018, 12:39 PM

Please note that you must be a supporting member to post classified item. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

**70cst** · 05-27-2018, 12:11 AM

Folks - This is not a For Sale thread.

**Warrens69GMC** · 05-27-2018, 12:36 AM

Please note that you must be a supporting member to post classified item. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

hotwls13 · 05-27-2018, 05:17 PM

Well I’ve looked at a few so far. None of them are nice enough for me to commit to. I’m just gonna keep moving forward with my current bed. If I find a mostly perfect long bed I may do a swap in the future.

mike16 · 05-27-2018, 10:07 PM

Please note that you must be a supporting member to post classified item. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

hotwls13 · 05-27-2018, 10:34 PM

Please note that you must be a supporting member to post classified item. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

hotwls13 · 05-27-2018, 10:36 PM

Please note that you must be a supporting member to post classified item. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

**70cst** · 05-28-2018, 06:55 PM

Folks ….

I said per the rules this is not a FS thread. Its now closed.

rockyrivermark · 05-28-2018, 08:25 PM

The bedsides are the same for 67-72 but the 1967 doesn't have cutouts for side light markers. Just heads up.
RRM

05-24-2018, 03:39 PM	#1
hotwls13 Registered User Join Date: Mar 2018 Location: Bakersfield, CA Posts: 308	Shopping for replacement longbed My rear corners (around taillights) are really rough. Lots of thick bondo (1/2” or more) covering rust and dents. I think I prefer the steel floor but I’m open to wood floor too. I think the wood floors will likely needs lots of repair though and I’d like to keep the costs down. Planning to put the bed on a flatbed trailer (sitting the bed on top of my gorilla garden cart during transport and to move around once I get it home). Last edited by 70cst; 05-28-2018 at 06:58 PM.

05-24-2018, 05:45 PM	#2
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Shopping for replacement longbed 67-72 beds are the same and will bolt up directly where your old one once resided, the tailgate is identical also. Last edited by 70cst; 05-27-2018 at 12:10 AM.

05-25-2018, 12:39 PM	#4
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	Re: Shopping for replacement longbed Please note that you must be a supporting member to post classified item. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. __________________ Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks Last edited by 70cst; 05-28-2018 at 06:57 PM.

05-27-2018, 12:11 AM	#5
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Shopping for replacement longbed Folks - This is not a For Sale thread. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

05-27-2018, 12:36 AM	#6
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,622	Re: Shopping for replacement longbed Please note that you must be a supporting member to post classified item. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. __________________ 1969 307, t350 1950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT Last edited by 70cst; 05-28-2018 at 06:57 PM.

05-27-2018, 05:17 PM	#7
hotwls13 Registered User Join Date: Mar 2018 Location: Bakersfield, CA Posts: 308	Re: Shopping for replacement longbed Well I’ve looked at a few so far. None of them are nice enough for me to commit to. I’m just gonna keep moving forward with my current bed. If I find a mostly perfect long bed I may do a swap in the future.

05-27-2018, 10:07 PM	#8
mike16 Registered User Join Date: Dec 2009 Location: bisbee, arizona Posts: 1,529	Re: Shopping for replacement longbed Please note that you must be a supporting member to post classified item. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by 70cst; 05-28-2018 at 06:57 PM.

05-27-2018, 10:34 PM	#9
hotwls13 Registered User Join Date: Mar 2018 Location: Bakersfield, CA Posts: 308	Re: Shopping for replacement longbed Please note that you must be a supporting member to post classified item. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by 70cst; 05-28-2018 at 06:57 PM.

05-27-2018, 10:36 PM	#10
hotwls13 Registered User Join Date: Mar 2018 Location: Bakersfield, CA Posts: 308	Re: Shopping for replacement longbed Please note that you must be a supporting member to post classified item. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by 70cst; 05-28-2018 at 06:57 PM.

05-28-2018, 06:55 PM	#11
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Shopping for replacement longbed Folks …. I said per the rules this is not a FS thread. Its now closed. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

05-28-2018, 08:25 PM	#12
rockyrivermark Registered User Join Date: Apr 2011 Location: Fairview Park, Ohio Posts: 1,031	Re: Shopping for replacement longbed The bedsides are the same for 67-72 but the 1967 doesn't have cutouts for side light markers. Just heads up. RRM __________________ My build page http://67-72chevytrucks.com/vboard/s...d.php?t=764662 My cabinet building site http://www.cbcabinets.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.