What did you do to your truck today? Chapter II - Page 283 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72c20customcamper · 07-29-2018, 12:50 PM

Fixed the horns and signal self canceler Bought a new turn signal switch but didn't like the modern 4 way button and using an adapter to my wiring. So I took parts from the new one to fix the original. Just needed the spring under the horn contact and the spring for the self cancel. New springs and all is good.

ZEKE68 · 07-29-2018, 09:41 PM

1. Finished installing the transmission controller and wiring. 2. put the seat and carpet back in. 3. Glued the rear view mirror bracket on three times. ( It came off twice when I went to put the mirror on), ( 90 degrees and raining here today ). 4. Then I started taking out the plywood bed the PO put in, so I can rebuild the differential, install a top mount rear sway bar, and install a real wood bed.

**Canuckvetter** · 07-30-2018, 01:03 AM

Degrease and power wash the engine bay of the “Redheaded Stepchild”. Next is to detail in anticipation of the up coming 327 rebuild.

http://67-72chevytrucks.com/vboard/a...1&d=1532926760

66clow · 07-30-2018, 07:21 PM

Bought a $20 Nissan truck car cover for my 69 off Facebook🤣 does the job.

Metaldoc · 07-30-2018, 11:17 PM

Quote:

Originally Posted by 66clow

Bought a $20 Nissan truck car cover for my 69 off Facebook🤣 does the job.

I bought one at Walmart on sale with a crushed box and I never put it on, but then again I've never washed my truck.

66clow · 07-31-2018, 10:38 PM

Hauled the bug home from getting the electricals fixed. It now has lights. Once I finish the interior and flip it, time to get the body work done on the truck to paint it.

rkeller411 · 07-31-2018, 11:01 PM

Finished LS swap...

**Canuckvetter** · 08-01-2018, 12:08 AM

Removed the box to freshen up the paint on the frame. Dimpled and test fit the power steering box prior to frame paint.

http://67-72chevytrucks.com/vboard/a...1&d=1533096343

VWNate1 · 08-01-2018, 08:37 AM

Looks like a good project, how will you prepare the old surface to re paint it ? .

TIA,

Metaldoc · 08-01-2018, 12:26 PM

Dimpled and test fit the power steering box prior to frame paint.

Blue flame adjustable and a BFH?

72c20customcamper · 08-01-2018, 09:16 PM

New bearings on the drivers side rotor. And new tires all around. Amazing that they looked great on the outside but in the back side cracked like all hell. But the DOT code was the 42 week of 2010 so they were done. Should have looked when I bought it could have knocked a little off the price

**Canuckvetter** · 08-01-2018, 10:31 PM

Quote:

Originally Posted by Metaldoc

Dimpled and test fit the power steering box prior to frame paint.

Blue flame adjustable and a BFH?

Yes. 2 applications for a precision fit lol.

NoStopN · 08-02-2018, 07:34 PM

I knocked off all but one old mount from the flatbed. The last one is welded in multiple places & I need to buy a cutoff wheel.

**Already Gone** · 08-03-2018, 12:54 AM

I didn't do anything to my truck but was on the way home and the City had blocked off a main intersection for road repairs so I went down a back alley and lo and behold there was 68/69 GMC with a canopy sitting in a back yard with 90's Lincoln in fornt of it. Wife was with me so I'll go do some investigation when I'm alone and yes I'll get pics..

**Already Gone** · 08-04-2018, 06:36 PM

As promised he is the pic..

**rustytruck50** · 08-04-2018, 09:10 PM

Well, you've heard about the YouTube videos about the adult dog getting a puppy to play with....I bought Raymond a youthful stepbrother/daily driver today, a '98 Silverado Z71 XCab....no pics now, but will have soon

stevenfromtexas · 08-04-2018, 10:18 PM

finally found a tricky vacuum leak, with the advise of so many folks on this amazing board!!!

thank you all!!!!, for everything

**BC10** · 08-05-2018, 12:33 AM

Prep and primer, more prep and more primer, repeat...

weq92f · 08-05-2018, 12:37 AM

Went to check the cam lash and found it would not move at all without deflecting the cover. I have not a clue what might have caused this. Cover comes back off and it will be adjusted again. Gasket was destroyed so now I have another set of waterpump gaskets and a front seal! Yay!

-klb

PepperTreeGarage · 08-05-2018, 01:22 AM

Got the "Stance" right on the "Shop Truck"~~Still much to do~~~~~

**rustytruck50** · 08-05-2018, 10:33 AM

Quote:

Originally Posted by PepperTreeGarage

Got the "Stance" right on the "Shop Truck"~~Still much to do~~~~~

Nice!!!!!!!

**rustytruck50** · 08-05-2018, 10:37 AM

New ride & Blue ride pic as promised....really happy with the '98...need to diagnose a warm engine hesitation & all will be good in the hood

Getting Raymond's timing chain & gears replaced will take care of that nasty disturbance in the force, as well

ncpetersc · 08-05-2018, 02:26 PM

Quote:

Originally Posted by stevenfromtexas

finally found a tricky vacuum leak, with the advise of so many folks on this amazing board!!!

thank you all!!!!, for everything

Was psyched to read about your success!!

stevenfromtexas · 08-05-2018, 02:28 PM

Quote:

Originally Posted by ncpetersc

Was psyched to read about your success!!

thank you!!!!

drove it to church this morning

**RodnRudy** · 08-05-2018, 02:54 PM

Not today but Thursday I met my buddy from Illinois at the Street Rod Nationals in Louisville Ky. Had a real good weekend. His saddle colored 68 with the old topper is very cool.

07-29-2018, 12:50 PM	#7051
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,626	Re: What did you do to your truck today? Chapter II Fixed the horns and signal self canceler Bought a new turn signal switch but didn't like the modern 4 way button and using an adapter to my wiring. So I took parts from the new one to fix the original. Just needed the spring under the horn contact and the spring for the self cancel. New springs and all is good. Attached Images Last edited by 72c20customcamper; 07-30-2018 at 08:18 PM.

07-29-2018, 09:41 PM	#7052
ZEKE68 Registered User Join Date: Jul 2012 Location: Space Coast, Florida Posts: 403	Re: What did you do to your truck today? Chapter II 1. Finished installing the transmission controller and wiring. 2. put the seat and carpet back in. 3. Glued the rear view mirror bracket on three times. ( It came off twice when I went to put the mirror on), ( 90 degrees and raining here today ). 4. Then I started taking out the plywood bed the PO put in, so I can rebuild the differential, install a top mount rear sway bar, and install a real wood bed. __________________ 1968 SWB Step Side, Big Block, 4L80E , Running!

07-30-2018, 01:03 AM	#7053
Canuckvetter How did I get this OLD! Join Date: Dec 2014 Location: Lamont County, AB, CANADA Posts: 1,047	Re: What did you do to your truck today? Chapter II Degrease and power wash the engine bay of the “Redheaded Stepchild”. Next is to detail in anticipation of the up coming 327 rebuild. http://67-72chevytrucks.com/vboard/a...1&d=1532926760 Attached Images __________________ 1967 Oshawa built LWB Fleetside. 327,3 OTT, 515 Vermilion, CST, PS, PB, Shoulder Harness, Tach,Vac, Speed Warning, Choke Delete, Manual Throttle, Fawn interior. Dealer installed A/C 04/2015, N34 Rosewood Wheel 06/2023 Members who I have met personally. Metaldoc, chevnkevin, 62 Longbed, 72LHorn, 72MARIO, YBNORML, TBONE1964, Classic Bowties, Chevemall, Dagnabbitt.

07-30-2018, 07:21 PM	#7054
66clow Registered User Join Date: Jun 2012 Location: Clearwater Beach Florida Posts: 872	Re: What did you do to your truck today? Chapter II Bought a $20 Nissan truck car cover for my 69 off Facebook🤣 does the job. Attached Images

07-31-2018, 10:38 PM	#7056
66clow Registered User Join Date: Jun 2012 Location: Clearwater Beach Florida Posts: 872	Re: What did you do to your truck today? Chapter II Hauled the bug home from getting the electricals fixed. It now has lights. Once I finish the interior and flip it, time to get the body work done on the truck to paint it. Attached Images

07-31-2018, 11:01 PM	#7057
rkeller411 Registered User Join Date: Apr 2017 Location: Alta Loma, CA Posts: 42	Re: What did you do to your truck today? Chapter II Finished LS swap... Attached Images

08-01-2018, 12:08 AM	#7058
Canuckvetter How did I get this OLD! Join Date: Dec 2014 Location: Lamont County, AB, CANADA Posts: 1,047	Re: What did you do to your truck today? Chapter II Removed the box to freshen up the paint on the frame. Dimpled and test fit the power steering box prior to frame paint. http://67-72chevytrucks.com/vboard/a...1&d=1533096343 Attached Images __________________ 1967 Oshawa built LWB Fleetside. 327,3 OTT, 515 Vermilion, CST, PS, PB, Shoulder Harness, Tach,Vac, Speed Warning, Choke Delete, Manual Throttle, Fawn interior. Dealer installed A/C 04/2015, N34 Rosewood Wheel 06/2023 Members who I have met personally. Metaldoc, chevnkevin, 62 Longbed, 72LHorn, 72MARIO, YBNORML, TBONE1964, Classic Bowties, Chevemall, Dagnabbitt.

08-01-2018, 08:37 AM	#7059
VWNate1 Registered User Join Date: Feb 2012 Location: So. Cali. Posts: 2,656	Frame Painting Looks like a good project, how will you prepare the old surface to re paint it ? . TIA, __________________ -Nate Geezer '49 3100 235 W/ Muncie SM420 SOLD '69 C/10 shortbed sidemount survivor 250 L6 W/ 350TH

08-01-2018, 12:26 PM	#7060
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today? Chapter II Dimpled and test fit the power steering box prior to frame paint. Blue flame adjustable and a BFH? __________________ Do it, Do it right, Do it right the first time

08-01-2018, 09:16 PM	#7061
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,626	Re: What did you do to your truck today? Chapter II New bearings on the drivers side rotor. And new tires all around. Amazing that they looked great on the outside but in the back side cracked like all hell. But the DOT code was the 42 week of 2010 so they were done. Should have looked when I bought it could have knocked a little off the price

08-02-2018, 07:34 PM	#7063
NoStopN Registered User Join Date: Jul 2016 Location: Murfreesboro, TN Posts: 229	Re: What did you do to your truck today? Chapter II I knocked off all but one old mount from the flatbed. The last one is welded in multiple places & I need to buy a cutoff wheel. __________________ 1969 GMC 2500. 250 I6, 4-speed w/ granny low

08-03-2018, 12:54 AM	#7064
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,139	Re: What did you do to your truck today? Chapter II I didn't do anything to my truck but was on the way home and the City had blocked off a main intersection for road repairs so I went down a back alley and lo and behold there was 68/69 GMC with a canopy sitting in a back yard with 90's Lincoln in fornt of it. Wife was with me so I'll go do some investigation when I'm alone and yes I'll get pics.. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

08-04-2018, 06:36 PM	#7065
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,139	Re: What did you do to your truck today? Chapter II As promised he is the pic.. Attached Images __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

08-04-2018, 09:10 PM	#7066
rustytruck50 Senior Member Join Date: Feb 2011 Location: Papillion, Ne Posts: 897	Re: What did you do to your truck today? Chapter II Well, you've heard about the YouTube videos about the adult dog getting a puppy to play with....I bought Raymond a youthful stepbrother/daily driver today, a '98 Silverado Z71 XCab....no pics now, but will have soon __________________ -Doug '05 RCSB Sierra 2WD '71 Sierra 2WD Longbed '98 Silverado K1500 Xcab...sold '72 Highlander"Raymond"...sold

08-04-2018, 10:18 PM	#7067
stevenfromtexas Registered User Join Date: Mar 2013 Location: Hewitt, Texas Posts: 444	Re: What did you do to your truck today? Chapter II finally found a tricky vacuum leak, with the advise of so many folks on this amazing board!!! thank you all!!!!, for everything __________________ Steven '67 SWB, 250ci, 3OTT.......this is my first build...... I wonder if my grand kids will say, "I would give anything to have my grand dads 2005 Chevrolet Z71"



Register or Log In To remove these advertisements.

08-05-2018, 12:33 AM	#7068
BC10 Senior Member Join Date: Oct 2013 Location: Bay Area, CA Posts: 493	Re: What did you do to your truck today? Chapter II Prep and primer, more prep and more primer, repeat... Attached Images

08-05-2018, 12:37 AM	#7069
weq92f Registered User Join Date: Oct 2016 Location: Dallas Texas Posts: 3,151	Re: What did you do to your truck today? Chapter II Went to check the cam lash and found it would not move at all without deflecting the cover. I have not a clue what might have caused this. Cover comes back off and it will be adjusted again. Gasket was destroyed so now I have another set of waterpump gaskets and a front seal! Yay! -klb __________________ 67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold

08-05-2018, 01:22 AM	#7070
PepperTreeGarage Registered User Join Date: Jan 2014 Location: SoCal Posts: 281	Re: What did you do to your truck today? Chapter II Got the "Stance" right on the "Shop Truck"~~Still much to do~~~~~ Attached Images

08-05-2018, 10:37 AM	#7072
rustytruck50 Senior Member Join Date: Feb 2011 Location: Papillion, Ne Posts: 897	Re: What did you do to your truck today? Chapter II New ride & Blue ride pic as promised....really happy with the '98...need to diagnose a warm engine hesitation & all will be good in the hood Getting Raymond's timing chain & gears replaced will take care of that nasty disturbance in the force, as well Attached Images __________________ -Doug '05 RCSB Sierra 2WD '71 Sierra 2WD Longbed '98 Silverado K1500 Xcab...sold '72 Highlander"Raymond"...sold

08-05-2018, 02:54 PM	#7075
RodnRudy Senior Member Join Date: Oct 2014 Location: New Palestine In Posts: 931	Re: What did you do to your truck today? Chapter II Not today but Thursday I met my buddy from Illinois at the Street Rod Nationals in Louisville Ky. Had a real good weekend. His saddle colored 68 with the old topper is very cool. Attached Images __________________ Phil "Money is only a tool to create and achieve what you want most in life" PayPal: rodnrudy@comcast.net

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.