AZ WTB Blazer hatch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Jurassic-1** · 08-19-2018, 09:47 AM

WTB a nice Blazer hatch. I am looking for an un-repaired original hatch for my 1972 Blazer.

**1rippen6** · 08-19-2018, 05:27 PM

I have this one looks like there is a crack around one of the catches but there is so many layers of paint its hard to tell also looks like the corner is starting to separate. Doesn't appear to have any other cracks around the normal areas. The handle area does have a missing pieces but will be hidden by the handle. I can get more pictures if needed 400 plus shipping. If interested send me your zip and I will get you a shipping quote guessing around 100 shipping maybe cheaper if you don't need the glass.

**1rippen6** · 08-19-2018, 05:29 PM

last pics

**Jurassic-1** · 08-19-2018, 07:07 PM

I was hoping for an un-damaged one. How bad is the cracking? What does the outside look like across the bottom ?

**1rippen6** · 08-20-2018, 01:58 PM

Here is a couple more let me know if you need anymore. I took a couple of the crack with and without the flash the blazer is in the garage the lighting isn't the greatest.

**1rippen6** · 08-20-2018, 01:59 PM

last

**Jurassic-1** · 08-20-2018, 10:50 PM

Have you tried to loosen any of the bolts? How are the threads for the handle? Is the crack that looks like a split on the bottom edge the only one? No outside or inside cracks? My biggest concern is rusted plates and structural cracks. These gates usually have minor hairline cracks in the corners by the glass. Thank You for the extra pictures.

**1rippen6** · 08-20-2018, 11:09 PM

No didn't try to loosen the bolts. I think the threads where the handle bolts are good but will double check. That's the only one I've seen but it does have a lot of paint on it. I can get you some pictures of the corners by the glass. I may have plates if they are rusted I've replaced them before they are only pop riveted in I'll check tomorrow. I'm getting ready to part that blazer so I can take the hatch off and get a lot better look at it in a couple of days.

NorthernMatthew · 08-21-2018, 01:10 AM

Hello again, does that Blazer have a jack set in it you want to sell?

**1rippen6** · 08-21-2018, 12:59 PM

Quote:

Originally Posted by NorthernMatthew

Hello again, does that Blazer have a jack set in it you want to sell?

Sorry, it doesn't

**1rippen6** · 08-21-2018, 01:28 PM

The nuts for the handle are fine I actually heated them up when I removed the handle. Here are the pictures of the corners the paint definitely has cracks just don't know if its because of the paint being so thick or other issues. I didn't look for the plates but if your still interested after these pictures I will look.

**1rippen6** · 08-21-2018, 01:29 PM

last

NorthernMatthew · 08-21-2018, 05:11 PM

Quote:

Originally Posted by 1rippen6

Sorry, it doesn't

If you can, please remember I’m on the hunt for a set that comes from a Blazer

**1rippen6** · 08-21-2018, 05:41 PM

Quote:

Originally Posted by NorthernMatthew

If you can, please remember I’m on the hunt for a set that comes from a Blazer

Will try

**Jurassic-1** · 08-25-2018, 08:05 PM

Here is My Blazer. It is the one I need it for.

08-19-2018, 09:47 AM	#1
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	WTB Blazer hatch WTB a nice Blazer hatch. I am looking for an un-repaired original hatch for my 1972 Blazer.

08-19-2018, 05:27 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB Blazer hatch I have this one looks like there is a crack around one of the catches but there is so many layers of paint its hard to tell also looks like the corner is starting to separate. Doesn't appear to have any other cracks around the normal areas. The handle area does have a missing pieces but will be hidden by the handle. I can get more pictures if needed 400 plus shipping. If interested send me your zip and I will get you a shipping quote guessing around 100 shipping maybe cheaper if you don't need the glass. Attached Images

08-19-2018, 05:29 PM	#3
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB Blazer hatch last pics Attached Images

08-19-2018, 07:07 PM	#4
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: WTB Blazer hatch I was hoping for an un-damaged one. How bad is the cracking? What does the outside look like across the bottom ?

08-20-2018, 01:58 PM	#5
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB Blazer hatch Here is a couple more let me know if you need anymore. I took a couple of the crack with and without the flash the blazer is in the garage the lighting isn't the greatest. Attached Images

08-20-2018, 01:59 PM	#6
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB Blazer hatch last Attached Images

08-20-2018, 10:50 PM	#7
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: WTB Blazer hatch Have you tried to loosen any of the bolts? How are the threads for the handle? Is the crack that looks like a split on the bottom edge the only one? No outside or inside cracks? My biggest concern is rusted plates and structural cracks. These gates usually have minor hairline cracks in the corners by the glass. Thank You for the extra pictures.

08-20-2018, 11:09 PM	#8
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB Blazer hatch No didn't try to loosen the bolts. I think the threads where the handle bolts are good but will double check. That's the only one I've seen but it does have a lot of paint on it. I can get you some pictures of the corners by the glass. I may have plates if they are rusted I've replaced them before they are only pop riveted in I'll check tomorrow. I'm getting ready to part that blazer so I can take the hatch off and get a lot better look at it in a couple of days.

08-21-2018, 01:10 AM	#9
NorthernMatthew Registered User Join Date: Jan 2016 Location: Sherwood Park, Alberta Posts: 426	Re: WTB Blazer hatch Hello again, does that Blazer have a jack set in it you want to sell?

08-21-2018, 01:28 PM	#11
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB Blazer hatch The nuts for the handle are fine I actually heated them up when I removed the handle. Here are the pictures of the corners the paint definitely has cracks just don't know if its because of the paint being so thick or other issues. I didn't look for the plates but if your still interested after these pictures I will look. Attached Images

08-21-2018, 01:29 PM	#12
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB Blazer hatch last Attached Images

08-25-2018, 08:05 PM	#15
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: WTB Blazer hatch Here is My Blazer. It is the one I need it for. Attached Images Last edited by Jurassic-1; 08-26-2018 at 01:26 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.