Did GM use the same spindles for both vans and trucks? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72timemachine · 09-20-2018, 07:19 AM

For example, if you had a 1972 g/10 van with front disc and a 1972 c/10 also with front brakes, would the spindles be the same? I understand other parts on the suspension may be different.

Thanks for any help.

**clay68c10** · 09-20-2018, 12:33 PM

Knowing how GM does things, I’d suspect they are the same.
Maybe someone with a Hollander manual will check in.

09-20-2018, 07:19 AM	#1
72timemachine Registered User Join Date: Oct 2008 Location: los angeles ca Posts: 220	Did GM use the same spindles for both vans and trucks? For example, if you had a 1972 g/10 van with front disc and a 1972 c/10 also with front brakes, would the spindles be the same? I understand other parts on the suspension may be different. Thanks for any help.

09-20-2018, 12:33 PM	#2
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,988	Re: Did GM use the same spindles for both vans and trucks? Knowing how GM does things, I’d suspect they are the same. Maybe someone with a Hollander manual will check in. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.