![]() |
![]() |
#1 |
Registered User
Join Date: Jan 2018
Location: TN
Posts: 263
|
1994 G20 Van spindles
I have a 1994 G20 Chevy van with a known head gasket. It’s worth more in scrap then what I could ask it for. My question is, could I use the spindles on the front of the van for a disc brake conversion. If so could I also use any aftermarket brake booster and master cylinder. I really dislike the plastic MC from the 90’s Thanks. What else could I also rip apart on the van to upgrade the truck?
Posted via Mobile Device |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2009
Location: Southern Oregon
Posts: 1,352
|
Re: 1994 G20 Van spindles
I dont know about the spindles.
However, I would yank out the trans. Its most likly a 4l80E being as the donor is a 3/4 ton. A 4L60E would also be worth grabbing. Id also keep the motor if its a 350. It should be a factory roller cam motor. At the very least grab the serpentine set up and all brackets. FYI 4.3 accessory drive is the same as the 5.7 IIRC.
__________________
1967 C10 Suburban 454/TH400/3.07's An Average Joe and His 'Burb: http://67-72chevytrucks.com/vboard/s...d.php?t=775843 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|