Where do these go ? Help. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mygmctruck1 · 02-05-2019, 12:12 PM

Dissembled my truck many yrs ago , can not identify these 2 bolts . I looked in my assembly manual but no dice.
And there’s just 2 of them .

**1968k20** · 02-05-2019, 12:16 PM

Inside front fender wheel well area

Lanman1972 · 02-05-2019, 12:21 PM

X2 inner fender bolts, from the wheel side to the firewall.

mygmctruck1 · 02-05-2019, 12:35 PM

Thanks , that’s what I thought but wanted to make sure .

**southern parts** · 02-05-2019, 10:12 PM

Should also have a shim that goes between the inner fender and the cab

mygmctruck1 · 02-05-2019, 10:16 PM

Quote:

Originally Posted by southern parts

Should also have a shim that goes between the inner fender and the cab

I have the both shims

**derotoreut** · 02-05-2019, 10:57 PM

I'm not familiar with those shims. I don't think I've ever seen them. I'll have to look into that. Interesting.

**71CHEVYSHORTBED402** · 02-05-2019, 11:48 PM

Quote:

Originally Posted by derotoreut

I'm not familiar with those shims. I don't think I've ever seen them. I'll have to look into that. Interesting.

That makes two of us. My truck didn't have these "as required". Makes me wanna get some for the rebuild, just in case they "are required"

Page 307 & 308 in the assembly manual.

**Curtb1971** · 02-05-2019, 11:51 PM

Quote:

Originally Posted by 71CHEVYSHORTBED402

That makes two of us. My truck didn't have these "as required". Makes me wanna get some for the rebuild, just in case they "are required"

Page 307 & 308 in the assembly manual.

Same here, wonder if anyone has a picture of the inner fender shim?

**LockDoc** · 02-06-2019, 01:02 AM

Quote:

Originally Posted by Curtb1971

Same here, wonder if anyone has a picture of the inner fender shim?

Some trucks have them and some don't. Just start the bolt, hook the shim on the bolt and they stay in place while you tighten them up.

LockDoc

**Curtb1971** · 02-06-2019, 01:15 AM

Quote:

Originally Posted by LockDoc

Some trucks have them and some don't. Just start the bolt, hook the shim on the bolt and they stay in place while you tighten them up.

LockDoc

Thanks Leon

Always learning something new about these old rigs

**LockDoc** · 02-06-2019, 01:48 AM

Quote:

Originally Posted by Curtb1971

Thanks Leon

Always learning something new about these old rigs

Yeah, they have some parts that are kind of elusive. Some never had them, some probably fell out somewhere along the line, and some guys take the bolts out and the shim falls on the floor and they say "Where in the heck did that come from"....

If the inner fender fits tight against the toe board brace you wouldn't need them.

LockDoc

mygmctruck1 · 02-06-2019, 09:11 AM

Quote:

Originally Posted by LockDoc

Yeah, they have some parts that are kind of elusive. Some never had them, some probably fell out somewhere along the line, and some guys take the bolts out and the shim falls on the floor and they say "Where in the heck did that come from"....

If the inner fender fits tight against the toe board brace you wouldn't need them.

LockDoc

It’s amazing what the big 3 did back then. Like I posted earlier , my 68 had 67 arm rests ? Ford did the same thing , if they were short something . They used what would work.
My 69 mustang was supposed to have the pink resister wire from the ign switch to the coil , nope that wire was red and green. I spent an hour looking for that dam pink wire. My harness was never altered , yet it was wrong . Go figure.

mygmctruck1 · 02-06-2019, 10:35 AM

Quote:

Originally Posted by 71CHEVYSHORTBED402

That makes two of us. My truck didn't have these "as required". Makes me wanna get some for the rebuild, just in case they "are required"

Page 307 & 308 in the assembly manual.

I have an assembly manual but pages aren't numbered. Enlighten me .

**LockDoc** · 02-06-2019, 01:00 PM

Quote:

Originally Posted by mygmctruck1

I have an assembly manual but pages aren't numbered. Enlighten me .

You might read through this thread.

http://67-72chevytrucks.com/vboard/s...d.php?t=351185

I haven't read the whole thing so I don't know if it was finished or not but they were working on it hot and heavy for quite a while.

LockDoc

**71CHEVYSHORTBED402** · 02-06-2019, 01:16 PM

Quote:

Originally Posted by mygmctruck1

I have an assembly manual but pages aren't numbered. Enlighten me .

When you're really bored number every other page until you've reached 1064

A few of the members here were good enough to ID every page on a spreadsheet. They did a great job, I have it in Word.

mygmctruck1 · 02-06-2019, 01:45 PM

Quote:

Originally Posted by 71CHEVYSHORTBED402

When you're really bored number every other page until you've reached 1064

A few of the members here were good enough to ID every page on a spreadsheet. They did a great job, I have it in Word.

Geez , I thought maybe you had a great wisdom Lol . I'm not that bored these days . But I just checked out the spreadsheet and it's an awesome piece of work.

02-05-2019, 12:12 PM	#1
mygmctruck1 Registered User Join Date: Jun 2018 Location: Munising,Mi Posts: 360	Where do these go ? Help. Dissembled my truck many yrs ago , can not identify these 2 bolts . I looked in my assembly manual but no dice. And there’s just 2 of them . Attached Images

02-05-2019, 12:16 PM	#2
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,618	Re: Where do these go ? Help. Inside front fender wheel well area __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

02-05-2019, 12:21 PM	#3
Lanman1972 Registered User Join Date: Dec 2013 Location: Omaha NE Posts: 620	Re: Where do these go ? Help. X2 inner fender bolts, from the wheel side to the firewall. __________________ 1972 C10 Custom Deluxe LWB, 402/400, PS, PB, A/C, Highlander, Hugger / White 1971 C10 Cheyenne LWB (SWB), 350/350, PS, PB, A/C, Dark Olive / White.

02-05-2019, 12:35 PM	#4
mygmctruck1 Registered User Join Date: Jun 2018 Location: Munising,Mi Posts: 360	Re: Where do these go ? Help. Thanks , that’s what I thought but wanted to make sure .

02-05-2019, 10:12 PM	#5
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: Where do these go ? Help. Should also have a shim that goes between the inner fender and the cab

02-05-2019, 10:57 PM	#7
derotoreut Roto Reuter thats the name... Join Date: Feb 2010 Location: Darien, NY Posts: 1,853	Re: Where do these go ? Help. I'm not familiar with those shims. I don't think I've ever seen them. I'll have to look into that. Interesting. __________________ ~ Dan My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232 My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394 1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt 1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project "Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.