The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-09-2019, 08:00 PM   #1
mygmctruck1
Registered User
 
Join Date: Jun 2018
Location: Munising,Mi
Posts: 360
Being in a hurry , bad idea !

My truck frame had been awaiting new brake lines , engine & drive line. I had the brake lines sitting on the shelf just waiting for installation and way before my beautiful crate engine and headers showed up..

But I could’nt wait the get the engine set in place headers and all. Got it in , fired up and was a happy camper . That is until I remembered I still needed to install the brake lines, so I have been under the truck rather than above it .
Takes a heck of a lot longer to put them in when everything is in your way.
2 - frustrating days later , there in .

I know , I am not the only one to have ever done this , am I ?

Last edited by mygmctruck1; 02-09-2019 at 08:11 PM.
mygmctruck1 is offline   Reply With Quote
Old 02-09-2019, 08:09 PM   #2
dmjlambert
Senior Member
 
dmjlambert's Avatar
 
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,859
Re: Being in a hurry , bad idea !

Hi, perhaps we are related. :-) I have a list of things that I should have done when the engine was out. The list is so long that I plan to just pull the engine out and work comfortably, and then put the engine back in.
dmjlambert is offline   Reply With Quote
Old 02-09-2019, 08:18 PM   #3
mygmctruck1
Registered User
 
Join Date: Jun 2018
Location: Munising,Mi
Posts: 360
Re: Being in a hurry , bad idea !

Quote:
Originally Posted by dmjlambert View Post
Hi, perhaps we are related. :-) I have a list of things that I should have done when the engine was out. The list is so long that I plan to just pull the engine out and work comfortably, and then put the engine back in.
Yea , some times you wonder. . I’m thankful it was just brake lines. By the way my cab is off too , so it was doubly easy !
mygmctruck1 is offline   Reply With Quote
Old 02-09-2019, 08:32 PM   #4
72 tigger
Registered User
 
72 tigger's Avatar
 
Join Date: Apr 2008
Location: Berne IN
Posts: 3,250
Re: Being in a hurry , bad idea !

That’s frustrating, sounds like it’s behind you
72 tigger is offline   Reply With Quote
Old 02-09-2019, 08:40 PM   #5
mygmctruck1
Registered User
 
Join Date: Jun 2018
Location: Munising,Mi
Posts: 360
Re: Being in a hurry , bad idea !

Quote:
Originally Posted by 72 tigger View Post
That’s frustrating, sounds like it’s behind you
Yes , but my impatience some times causes me more work than I bargained for. Lol
mygmctruck1 is offline   Reply With Quote
Old 02-14-2019, 12:00 AM   #6
kev2809
low n' slo
 
kev2809's Avatar
 
Join Date: Mar 2009
Location: rosenberg, texas
Posts: 5,175
Re: Being in a hurry , bad idea !

Quote:
Originally Posted by mygmctruck1 View Post
My truck frame had been awaiting new brake lines , engine & drive line. I had the brake lines sitting on the shelf just waiting for installation and way before my beautiful crate engine and headers showed up..

But I could’nt wait the get the engine set in place headers and all. Got it in , fired up and was a happy camper . That is until I remembered I still needed to install the brake lines, so I have been under the truck rather than above it .
Takes a heck of a lot longer to put them in when everything is in your way.
2 - frustrating days later , there in .

I know , I am not the only one to have ever done this , am I ?
well...when i first dropped my motor in to try to fire it up....filled it with oil and seen it pouring all over my garage floor.

forgot to put the filter on
__________________
67 1/2 ton Suburban - Project DRGNWGN. Build thread

-_--_--_ _________
_--_-_ -/____|__|__\__
,.,,,.,.,,.,|_O _______ O_]
kev2809 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:25 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com