WA 6 lug steel wheels for disc brakes

[randy500]

Removed from 72 4wd, set of 4, need paint, $325 shipped.
I will get pics tomorrow, if no buyers right off I may scrap these on Saturday.

Edit: 7/9/2019, I didn’t scrap any of these wheels and I now have more, at least 6 matching wheels all from my 2, 1972 k10’s

[67chevemall]

Originally Posted by randy500

Removed from 72 4wd, set of 4, need paint, $325 shipped.
I will get pics tomorrow, if no buyers right off I may scrap these on Saturday.

Scrap! no man those are good as gold.

Bump. I you have 3 humps and need 4 humps this is a good deal

I paid 400 USD

[Killer Bee]

yah, going to need to see pictures to tell if they'll run as-is or need to blast n paint.. thanks

[randy500]

I guess They are blast and paint...the 4th is under my truck in the spare tire carrier.

[randy500]

If the picture is not clear, they are 4 nub wheels.

[Killer Bee]

well they're not awful, could be worse.. don't need a pic but do you happen to know where the spare gauges on rust compared to these?

if you have a weight for one, can you estimate shipping to 92683? I do have a fastenal nearby as well..

oh and I forgot to ask the width, should be stamped near the valve stem, thanks

[michael bustamante]

2 of them strapped together for ship is 55. pounds. I found fed ex isint bad to send these. a good size box for these is sold at home depot. 18x18x16

[randy500]

Originally Posted by michael bustamante

2 of them strapped together for ship is 55. pounds. I found fed ex isint bad to send these. a good size box for these is sold at home depot. 18x18x16

Thanks for the info.

[randy500]

I would guess the offset difference is 3/16”

[Killer Bee]

I totally missed the shipped, which is huge for steel wheels..

I know what a powder coat job runs down here, let me see what other options I can come up with..

also a little concerned about the odd one but I'll ask my guys to see what they say..

should still mount up on my 72 K1500 and look straight?

thanks for the pictures and info, I'm workin on it..

[randy500]

I took them off my 72 K10....I think the 3 are original to the truck.

Originally Posted by Killer Bee

I totally missed the shipped, which is huge for steel wheels..

I know what a powder coat job runs down here, let me see what other options I can come up with..

also a little concerned about the odd one but I'll ask my guys to see what they say..

should still mount up on my 72 K1500 and look straight?

thanks for the pictures and info, I'm workin on it..

[Killer Bee]

thank you for all the info but my pit crew suggests I pass..

the 3 plus 1 isn't going to be worth it to me for making a matching set..

that is a good deal for someone with shipping, hopefully a buyer with the rest of a set or pairs finds your ad..

thanks again for all the info, GLWS!

[randy500]

Originally Posted by Killer Bee

thank you for all the info but my pit crew suggests I pass..

the 3 plus 1 isn't going to be worth it to me for making a matching set..

that is a good deal for someone with shipping, hopefully a buyer with the rest of a set or pairs finds your ad..

thanks again for all the info, GLWS!

Thanks for letting me know....

[randy500]

Ttt

[special-K]

I have bought a single rod of all thread, nuts, and washers to make three studs to absolutely hold two together for shipping. Fairly cheap insurance

[randy500]

I have more of these same wheels from another 72 k10, I believe I have 6 whees that are exactly the same, maybe 7.....

[saxart]

How wide are these wheels?

[randy500]

Originally Posted by saxart

How wide are these wheels?

I don’t know, I suspect 5.5 or 6

[randy500]

Ok a little searching says 6” wide.