GA Some good stuff I don't need anymore

[cwcarpenter98]

Cleaning out the garage so my parents will still let me store my parts until I graduate and get a house of my own

All parts are plus shipping and PayPal fees unless noted otherwise.

*It has come to my attention that in the future I need to only post pics that show the actual parts for sale. If it's not listed in this first post, it's not for sale.*

Here's the stuff:
#1 GMC horn button in great, original shape. Has normal wear and 1 small pitting mark, but other than that, a nice piece. $25 -SOLD-
#2 Front drum brakes complete from spindles out. Pulled off my 63 when I went disc brakes. Needs wheel cylinders, but the bearings seem ok. Also have drums in good shape that go with it, but I forgot to take a pic of those. $40
#3 Mr. Gasket air cleaner 9 in 4 barrel air cleaner. I bought it when I put a Quadrajet on my 283, ran it for a couple of months, then pulled it off to use a factory looking air cleaner. $10 -SOLD-
#4 SBC Long water pump. Came on the 283 I bought, but I needed a short water pump. This pump was working great when the previous owner of the engine pulled the 283 for a 350 $10
#5 Factory jack hold down with hardware and spring. $15 -SOLD-
#6 Original battery tray. Driver quality, solid piece. Would run on my truck if I had not bought a tray a couple months before I bought the core support this came on. $20 -SOLD-
#7 Windshield washer bottle bracket with bolts. Good condition, solid. $15
#8 Horn, I don't think it works $5
#9 Horn relay and voltage regulator. Don't know if it works, but it's $10
#10 60 Chevy grille. Good shape, includes the light bezels. Not rusted out. Only a couple small dings around a few of the letters. $125 -SOLD-
#11 64-66 radio delete plate with nice clips. Straight, no dings that I can see, nice patina $40 -SOLD-
#12 E brake handle. $10 -SOLD-
#13 Mr. Gasket carb spacer. Ended up not working for what I was trying to do. I didn't even get to bolt it to anything. Also comes with that Quadrajet base gasket. $20
#14 Hood latch with bolts. Came off a 62-66 hood, no clue what year it actually is. $10
#15 Original red arm rest. It's pretty rough, but maybe your patina truck needs it? $10
#16 Two sets of wiper arms and blades. One set is Anco and were on my truck when I got it. The other set is some aftermarket, replacement arms from the usual big parts places. I have no use for either set because I upgraded to Jeep arms. $10 each pair, or $15 if you buy both Both -SOLD-
#17 Chevy horn button. A couple pits, I accidentally scratched off some of the bowtie paint, driver quality, rubber ring is nice and pliable. $20 -SOLD-

[cwcarpenter98]

#2 Spindles are just dusty. They have been kept inside my parent's garage since I pulled them off the truck.

[cwcarpenter98]

#3
#4

[cwcarpenter98]

#5 Factory jack hold down with hardware and spring. $15 -SOLD-

[1960chevypanel]

I'll take the horn button to 92585

[cwcarpenter98]

Originally Posted by 1960chevypanel

I'll take the horn button to 92585

I'll get it boxed up and get you a shipping quote on Tuesday.

[1960chevypanel]

Ok thanks, a padded envelope would work too.

[cwcarpenter98]

1960chevypanel: I sent you a PM about shipping.

[cwcarpenter98]

GMC horn button SOLD to 1960chevypanel! Thanks Patrick, I'll get it shipped out tomorrow

[cwcarpenter98]

Still got this stuff. Will be at the Commerce swap meet on the 3rd

[Harlowhead1972]

I'll take the jack holder and spring if you don't mind shipping it. Thanks, Harlow

[cwcarpenter98]

Originally Posted by Harlowhead1972

I'll take the jack holder and spring if you don't mind shipping it. Thanks, Harlow

I figured out shipping now I'll get you a quote on Tuesday, will be out of town on Monday

[Harlowhead1972]

Sounds good. Thanks, Harlow

[cwcarpenter98]

Harlow, I sent you a pm. Sorry for the delay

[cwcarpenter98]

Jack mount SOLD to Harlow

[cwcarpenter98]

Air cleaner sold at the swap meet on Saturday.

Still have the water pump and the brake kit

[cwcarpenter98]

Still have the brakes and the water pump. Also have a few parts from a core support panel that I'll be posting up next week when I go home for Thanksgiving

[cwcarpenter98]

#8
#9

[cwcarpenter98]

#10

[DPowers]

Is that an extra set of bezels for the 60 grill or do they go with the grill? I would be interested in those if extra, plus the sail panel and hood inserts depending on price.

[cwcarpenter98]

Originally Posted by DPowers

Is that an extra set of bezels for the 60 grill or do they go with the grill? I would be interested in those if extra, plus the sail panel and hood inserts depending on price.

Those are the bezels that go with the grille. That's the only picture that I took of them, but I'll be able to get better pics of everything I've got for sale next week. I don't have an extra set, but I wouldn't be opposed to selling them separately.

The sail panel is in rough shape. Pretty much every screw hole is busted out. It will probably end up on my wall as wall art. I do know of a set in a local junkyard that's in good shape if you need a set.

On the hood inserts, I'm going to be holding on to them. I like them more than the 60 inserts and when I eventually find a 60-61 hood, I'll be using these on it.

My apologies for the confusion

[DPowers]

I do know of a set in a local junkyard that's in good shape if you need a set.

I'd be interested.

[cwcarpenter98]

Originally Posted by DPowers

I do know of a set in a local junkyard that's in good shape if you need a set.

I'd be interested.

I'm going stop by the yard at the end of this week. Need a couple things for my rust bucket, and I always enjoy walking around his yard

[tchevs]

Is the radiator hold down bracket for sale? if it is, Price shipped to 95012?

[cwcarpenter98]

Originally Posted by tchevs

Is the radiator hold down bracket for sale? if it is, Price shipped to 95012?

It is not for sale. It will eventually find its way on to my truck. Gotta repair the bottom of that core support, then I'll be putting the radiator in the factory v8 location