Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
06-13-2004, 01:06 PM | #1 |
huh?
Join Date: May 2000
Location: Washington, Illinois
Posts: 5,690
|
Corvette Straight Dump Ram Horns F/S (pics)
As the title says, I have a set of straight dump ram horns for sale. They're both casting # 3932461, and have no smog holes. They're off the RH side of a vette, but I had the pair on my 68 swb, and they worked fine. I believe these to be 2 1/4" also. I'm not exactly sure what they're worth, so let's go $100.00 plus shipping from 61744.
NO CRACKS, and all the flange bolt holes have good threads in them. More pics available, just ask. Thanks.
__________________
Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay |
06-13-2004, 05:22 PM | #2 |
Senior Member
Join Date: Apr 2001
Location: Amazonia, Mo. USA
Posts: 2,821
|
Can you do a pic with a tape measure across the dump? I would take them if they are 2 1/2".
__________________
72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide |
06-13-2004, 05:56 PM | #3 |
Account Suspended
Join Date: Jan 2000
Location: Woodstock, IL
Posts: 7,020
|
We could just mount them upside down, and run them there straight pipes right out of that there hood!!!! OOoowwwwweeeeeee !!!!!!!
|
06-14-2004, 07:18 PM | #4 |
Account Suspended
Join Date: Jan 2000
Location: Woodstock, IL
Posts: 7,020
|
TTT for ya there, big buddy. . .
|
06-16-2004, 12:16 PM | #5 | |
huh?
Join Date: May 2000
Location: Washington, Illinois
Posts: 5,690
|
Quote:
__________________
Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay |
|
06-16-2004, 09:47 PM | #6 |
Registered User
Join Date: May 2004
Location: Mt.Airy,MD
Posts: 123
|
What`s the difference between truck and Vette manifolds?
__________________
72CheyenneSuperK20CustomCamper350/TH350,A/C 72SierreGrandeK2500350/TH350,A/C 72CustomDeluxeK20CustomCamperSB400/4SPD.A/C 72CustomC10SWB,TH400,project |
06-17-2004, 06:29 PM | #7 |
Senior Member
Join Date: Apr 2001
Location: Amazonia, Mo. USA
Posts: 2,821
|
Someone will correct me if I am incorrect here.
Truck manifolds for the 4x4's are straight dump and 2" Corvette (later) are also straight dump and 2 1/4" Early Corvette are straight and 2 1/2". 2 wd trucks are angle dump. I had 2 1/5" on that last one and nobody noticed until me just now. Ooops.
__________________
72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide Last edited by nu2-72; 06-19-2004 at 08:52 PM. |
06-17-2004, 09:06 PM | #8 |
Registered User
Join Date: Feb 2001
Location: Salem , Oregon 97301
Posts: 1,796
|
68 Stepside will the stock exhaust pipe flange line up with the studs on those manifolds ? Can one use the doughnut gasket on both manifolds ? Jose
|
06-17-2004, 09:11 PM | #9 |
huh?
Join Date: May 2000
Location: Washington, Illinois
Posts: 5,690
|
Jose, I honestly can't tell you the answer to your question about the stock flanges. The whole exhaust on my truck was cobbled up by the previous owner. I can measure from the center of one hole to another, or something along those lines if you'd like. I would imagine stock donut gaskets would work just fine, that's what these had in them (well, what was left of them).
__________________
Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay |
06-17-2004, 09:19 PM | #10 |
Senior Member
Join Date: Apr 2004
Location: Northern Arizona
Posts: 687
|
I believe your correct NU2-72, I have a bunch 13 or 14 early vette exhaust manifolds in storage and there 2 1/2, the manifolds I have if Im not mistaken are 63-64's, and a couple earlier,and later, I bought in a storage lein sale, I have a couple pairs, but most of them are right sides. I'll check and see what they are soon, I will trade em, been holding onto them for years, also have a J-2 tripower manifold, no carbs-(57 olds) that I'll trade
Last edited by 72dually; 06-17-2004 at 09:21 PM. |
06-17-2004, 09:40 PM | #11 |
Senior Member
Join Date: Apr 2001
Location: Amazonia, Mo. USA
Posts: 2,821
|
72dually, I would be interested in a pair of the manifolds. PM me when you are ready.
__________________
72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide |
06-17-2004, 10:11 PM | #12 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
Vette Manifolds
Put me in line for a set if you would I broke the studs out of my pass side off my 66 L79 327 thanks Mike
__________________
hav'n fun be'n me |
06-18-2004, 12:05 AM | #13 |
"Ochre Ogre"
Join Date: Apr 2000
Location: Springfield, MN
Posts: 3,558
|
Jose, these will use the same 2" doughnut and the bolt pattern and spacing is the same as the truck manifolds.
These manifolds are 1969 to 1977 corvettes with 350 engines. They will not be the 2-1/2" ramshorns that came on the Hi-performance 327's.
__________________
Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087 |
06-18-2004, 12:12 AM | #14 |
Senior Member
Join Date: Apr 2004
Location: Northern Arizona
Posts: 687
|
No problem guys, next time I go out there, I'll bring em back, already been blasted too, also have a couple of them with some sorta bracket attached, which if I remember correctly were 64's
|
06-18-2004, 01:03 AM | #15 |
Senior Member
Join Date: Apr 2004
Location: Northern Arizona
Posts: 687
|
muddyole 69, would that have the factory nova body surrounding that L79 motor?
|
06-18-2004, 08:54 PM | #16 |
Registered User
Join Date: Oct 2001
Location: Littleton, CO. USA
Posts: 260
|
68, PM sent. I believe nu2 is correct also. The number you put up is the same as the number on my broken set off my 72 4x4.
|
06-18-2004, 09:30 PM | #17 |
Led Sled! Discs R 4 ME!
Join Date: Jan 2001
Location: Toms River, NJ, USA (Transplanted Hoosier)
Posts: 7,327
|
72dually,I would also be intrested in a pair of the 2-1/2" straight dump ramhorns
|
06-19-2004, 11:33 AM | #18 |
Senior Member
Join Date: Apr 2004
Location: Northern Arizona
Posts: 687
|
I'll see how many pairs I got, Im pretty sure I only have 2 or 3 pairs, and the rest being right side only, it will be a week or 2, this storage unit with exhaust manifolds, is 8 hrs away where I use to live. I also have a bunch of BBC brackets maybe you guys can help me ID, theres some BB oil pans, rods, 049 heads, 350 Lt1 pink rods, 186 camels, 392's, pulleys, lots of big valves, studs/guideplates, the guy collected corvette stuff and died, and I bought the storage unit with a buddy, we split the costs, he took the 6 454's, 1 of which was an LS6, and I got 2 corvette small blocks, a 67 tri-power w/carbs and linkage, and all the boxes of misc listed
Let me know if your interested Last edited by 72dually; 06-19-2004 at 02:26 PM. |
06-19-2004, 12:05 PM | #19 |
Senior Member
Join Date: Apr 2001
Location: Amazonia, Mo. USA
Posts: 2,821
|
I would be interested in some of your items. The manifolds for one and not knowing what else you may have, I would be interested in a list when you get to it. Thanks for your time and I await your reply. Kevin
__________________
72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide |
06-19-2004, 12:11 PM | #20 |
Senior Member
Join Date: Apr 2004
Location: Northern Arizona
Posts: 687
|
Im getting pm's for the manifolds, the order as it stands
1)NU2-72 2)muddyole 69 3)DennyB 4)jose Last edited by 72dually; 06-20-2004 at 12:00 AM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|