![]() |
![]() |
#1 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
hole ID
Anyone know if this hole is used for reassmbly of front clip ?
Just considering handing my AC drier there .... dont want to make lines and then find I have to relocate the drier due to interference. ![]() small hole towards front of UPPER inner fender front and center by itself. Just above the front support rod.
__________________
FAKKY 57 PANEL BUILD |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Mar 2012
Location: Lakes Region NH
Posts: 3,217
|
Re: hole ID
Is that a headlight wiring pass-through?
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: hole ID
That makes sense .....
Thinking of putting drier here ...... just dont want to have to move and create new lines ... ![]() ![]()
__________________
FAKKY 57 PANEL BUILD |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,817
|
Re: hole ID
I'm thinking that 1project2many is correct but the TF guys will have to confirm it.
I'm thinking that these grommets go in those holes. https://www.parts123.com/parts123/yb...Z5Z5Z50000014x Or from Classic parts https://www.classicparts.com/1956-57...ctinfo/37-822/
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: hole ID
thanks gys
cut the lines and mounted there. Looks good.
__________________
FAKKY 57 PANEL BUILD |
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: Mar 2012
Location: Lakes Region NH
Posts: 3,217
|
Re: hole ID
On my '57 The headlight/park light wiring was encased in a cloth loom which passed through that hole in a grommet with a single hole. When I added turn signals I added that wiring to the loom and used a new single-hole grommet.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|