CA Shortbed bedside cuts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**mikeyptv** · 02-11-2020, 06:23 PM

I'm replacing a partially damaged bedsides and want to offer cuts to anyone who's in need. It's a new bedside from Brothers that was recently rear ended. Damage is isolated to the tail light area, but the wheel well and most of the bed rail is in good shape. It's a driver's side, 67, short, fleet.

I figured it was worth an offer before I tossed it.

I'll be replacing it in the next week or two so I don't recommend being in a rush to get them!

Let me know what you want or need. Thanks.

-MP

**1968k20** · 02-11-2020, 09:59 PM

What part of Cal are you in?

projectking · 02-11-2020, 10:06 PM

Quote:

Originally Posted by mikeyptv

I'm replacing a partially damaged bedsides and want to offer cuts to anyone who's in need. It's a new bedside from Brothers that was recently rear ended. Damage is isolated to the tail light area, but the wheel well and most of the bed rail is in good shape. It's a driver's side, 67, short, fleet.

I figured it was worth an offer before I tossed it.

I'll be replacing it in the next week or two so I don't recommend being in a rush to get them!

Let me know what you want or need. Thanks.

-MP

Post a pic of the rear, I’d probably be able to pull that out for you if you were closer

Willys_MB · 02-11-2020, 10:07 PM

Quote:

Originally Posted by 1968k20

What part of Cal are you in?

Pretty sure I’ve seen this truck here in Folsom, CA.

**mikeyptv** · 02-12-2020, 04:10 AM

Quote:

Originally Posted by 1968k20

What part of Cal are you in?

I’m around LA. I can ship if you’re not local. Really just don’t want to throw away the good with the bad.

**mikeyptv** · 02-12-2020, 04:14 AM

Quote:

Originally Posted by projectking

Post a pic of the rear, I’d probably be able to pull that out for you if you were closer

I’d be curious if you think it could be pulled. Rear seems pretty well creased.

**mikeyptv** · 02-12-2020, 04:15 AM

Quote:

Originally Posted by Willys_MB

Pretty sure I’ve seen this truck here in Folsom, CA.

I don’t think it’s been up that way but I hope that’s guy’s bed is in better shape that mine is!

projectking · 02-12-2020, 06:35 AM

That didn’t look that bad from the side! Thanks for the pics and sorry about the truck man!

Madkidd007 · 02-12-2020, 09:42 PM

Wish you were closer, I’d take the whole side. Would be interested in it cut right behind the wheel opening if you don’t get anyone else closer and willing to ship

**mikeyptv** · 02-27-2020, 07:40 PM

Quote:

Originally Posted by Madkidd007

Wish you were closer, I’d take the whole side. Would be interested in it cut right behind the wheel opening if you don’t get anyone else closer and willing to ship

I'm down to ship you the whole thing if you want it. Just lmk. I just got it off today and other taking a cut for myself to fill the parking light hole of my new bedside, it's all yours!

Madkidd007 · 02-27-2020, 11:43 PM

Quote:

Originally Posted by mikeyptv

I'm down to ship you the whole thing if you want it. Just lmk. I just got it off today and other taking a cut for myself to fill the parking light hole of my new bedside, it's all yours!

Well I actully sold my project truck buy always looking to create some crazy stuff. What’s left?

02-11-2020, 06:23 PM	#1
mikeyptv Junior Member Join Date: Apr 2019 Location: CA Posts: 54	Shortbed bedside cuts I'm replacing a partially damaged bedsides and want to offer cuts to anyone who's in need. It's a new bedside from Brothers that was recently rear ended. Damage is isolated to the tail light area, but the wheel well and most of the bed rail is in good shape. It's a driver's side, 67, short, fleet. I figured it was worth an offer before I tossed it. I'll be replacing it in the next week or two so I don't recommend being in a rush to get them! Let me know what you want or need. Thanks. -MP Attached Images Last edited by mikeyptv; 02-11-2020 at 09:27 PM. Reason: adding photos

02-11-2020, 09:59 PM	#2
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: Shortbed bedside cuts What part of Cal are you in? __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

02-12-2020, 06:35 AM	#8
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Shortbed bedside cuts That didn’t look that bad from the side! Thanks for the pics and sorry about the truck man! __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

02-12-2020, 09:42 PM	#9
Madkidd007 Registered User Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,237	Re: Shortbed bedside cuts Wish you were closer, I’d take the whole side. Would be interested in it cut right behind the wheel opening if you don’t get anyone else closer and willing to ship __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.