how do i find out orginal body color? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BeerMonkeY · 06-18-2004, 05:14 PM

i have a 89 burb and i want to paint over the primerd areas but i dont want to paint the whole truck. how do i match the color that it is now. the truck had been painted before i bought it but i dont know if it was painted the orginal color, im pretty sure that the burbs vame 2 tone but mine is all gray, so i think it was gray/? and someone just painted it all gray but im not really sure.

chevythunder · 06-18-2004, 10:17 PM

titles useally tell ya what color the truck is supose to be. but agian, it could have been changed. check the tiltle. its a good start and prob. the easiest

Russ72C10 · 06-19-2004, 02:06 AM

From my experience, the factory paint code can usually be found inside the glove box door on the list of option codes, or on the driver side fenderwell under the hood.

kballan · 06-19-2004, 02:47 AM

Yep, what Russ72 said.

Jonboy · 06-19-2004, 10:17 AM

Two tone was an option. If the truck was repainted a close color, chances are that they did not repaint the jambs. jambing a burb is a royal pain. The insides of the doors should be OEM color.

BeerMonkeY · 06-19-2004, 02:39 PM

thats what i figured about the door jambs and they are the same as th body color

06-18-2004, 05:14 PM	#1
BeerMonkeY sold Join Date: Mar 2004 Location: PA Posts: 227	how do i find out orginal body color? i have a 89 burb and i want to paint over the primerd areas but i dont want to paint the whole truck. how do i match the color that it is now. the truck had been painted before i bought it but i dont know if it was painted the orginal color, im pretty sure that the burbs vame 2 tone but mine is all gray, so i think it was gray/? and someone just painted it all gray but im not really sure. __________________ 07 Rubicon, 2" lift,35's on some bling'n 20"s, warn winch. (20's for sale, 5on5) looking for 73-87 crew cab with 8' bed,2wd,PM me if you see one around

06-19-2004, 02:06 AM	#3
Russ72C10 Four Wheeler Join Date: Jul 2002 Location: Decatur, IL Posts: 101	From my experience, the factory paint code can usually be found inside the glove box door on the list of option codes, or on the driver side fenderwell under the hood. __________________ '84 K20 4x4 350 V8 - Weiand intake - Headers - 4" Tuff Country lift - 35x12.50 ProComp M/Ts on 15x10s

06-19-2004, 02:47 AM	#4
kballan Registered User Join Date: Jun 2003 Location: Fort Frances, Ontario, Canada Posts: 373	Yep, what Russ72 said. __________________ Kent Ballan ANY MAN CAN BUILD A TRUCK, BUT IT TAKES A REAL MAN TO CUT ONE UP!

06-19-2004, 10:17 AM	#5
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Two tone was an option. If the truck was repainted a close color, chances are that they did not repaint the jambs. jambing a burb is a royal pain. The insides of the doors should be OEM color. __________________ 1974 Jimmy- 5.3/4L80e/NP241

06-19-2004, 02:39 PM	#6
BeerMonkeY sold Join Date: Mar 2004 Location: PA Posts: 227	thats what i figured about the door jambs and they are the same as th body color __________________ 07 Rubicon, 2" lift,35's on some bling'n 20"s, warn winch. (20's for sale, 5on5) looking for 73-87 crew cab with 8' bed,2wd,PM me if you see one around

06-18-2004, 10:17 PM	#2
chevythunder Registered User Join Date: May 2004 Location: chesapeake va. Posts: 29	titles useally tell ya what color the truck is supose to be. but agian, it could have been changed. check the tiltle. its a good start and prob. the easiest

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.