The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-12-2020, 04:22 PM   #1
Ehodg66
Registered User
 
Join Date: Dec 2019
Location: fort lauderdale
Posts: 48
Door lock relay location

I bought my truck with the power door locks not working (not a deal breaker) and just now getting into the repair.

I've read that the door lock relay is located above the brake pedal. Does that mean mounted on the firewall? I found these 2 plugs and they look like the connectors for the relay that I've seen on the forum, but no relay.

I have a/c duct under the dash, is the relay behind the duct work? mounted to the backside of the dash?

I've also attached a pic of my fuse panel that shows a black relay at the top of the panel. Can someone identify that relay for me also?

thank you
Attached Images
   
Ehodg66 is offline   Reply With Quote
Old 03-12-2020, 11:04 PM   #2
1774btcrew
Senior Member
 
1774btcrew's Avatar
 
Join Date: Jun 2009
Location: Phoenix AZ
Posts: 4,603
Re: Door lock relay location

It should be attached to the right side of your pedal assembly
__________________
AZPartsLocators on Instagram

1972 Cheyenne Super Short Bed big block "Blackie"
1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog"
1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.
1774btcrew is offline   Reply With Quote
Old 03-13-2020, 12:20 PM   #3
Ehodg66
Registered User
 
Join Date: Dec 2019
Location: fort lauderdale
Posts: 48
Re: Door lock relay location

Just looked again and that relay is definitely not there. Minor detail..lol

Thanks 1774btcrew
Ehodg66 is offline   Reply With Quote
Old 03-17-2020, 09:18 PM   #4
Pontiac1976
Registered User
 
Pontiac1976's Avatar
 
Join Date: Oct 2015
Location: Ottawa, Ontario, Canada
Posts: 766
Re: Door lock relay location

https://www.ebay.ca/itm/1980-81-Cadi...5/222585272770

This should look like this for the relay
__________________
1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
Pontiac1976 is offline   Reply With Quote
Old 03-17-2020, 10:48 PM   #5
Big Moose
Registered User
 
Join Date: Dec 2018
Location: Alberta
Posts: 71
Re: Door lock relay location

Check behind the driver door panel, that's where I found mine
Big Moose is offline   Reply With Quote
Old 03-20-2020, 09:11 AM   #6
Sabaka454
Registered User
 
Sabaka454's Avatar
 
Join Date: Jul 2005
Location: CT
Posts: 278
Re: Door lock relay location

#2
Attached Images
 
Sabaka454 is offline   Reply With Quote
Old 03-20-2020, 09:29 AM   #7
Ehodg66
Registered User
 
Join Date: Dec 2019
Location: fort lauderdale
Posts: 48
Re: Door lock relay location

Thanks Sabaka454,
Mine is definitely not there. PO maybe didn't want to spend the money to replace it.
Do you know what the relay(?) is on top of the fuse block? Also, is that a disconnected seatbelt buzzer next to it?

thank you
Eric
Ehodg66 is offline   Reply With Quote
Old 03-20-2020, 10:50 AM   #8
Pontiac1976
Registered User
 
Pontiac1976's Avatar
 
Join Date: Oct 2015
Location: Ottawa, Ontario, Canada
Posts: 766
Re: Door lock relay location

The one with the like grill on it is the seat buzzer, the one on the left think it your horn relay.
You make a short wiring harness to adapter to aftermarket Relays.
__________________
1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
Pontiac1976 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:33 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com