Jimmy VS Shortbox frames - The 1947 - Present Chevrolet & GMC Truck Message Board Network

daniels84 · 06-20-2004, 02:27 AM

Hello, I was wondering if there is any differences between a 1971 Jimmy 4x4 frame and the frame for a 71 Shortbox 4x4. I'm asking because I just recently bought a 71 Jimmy that had a 69 cab put on it years ago and I was wondering if I could somehow put a shortbox box on it without any major modifications. Thanks for your help.

72 CustomCamper · 06-20-2004, 02:33 AM

The Jimmy/Blazer frame is shorter at the wheelbase by I think it is 10 inches.Here is a pic of a blazer frame with a cab and box on it. Look how much they had to cut off the front of the bed...

Chuck

72 CustomCamper · 06-20-2004, 02:34 AM

Here's a Blazer to compair it to...

Chuck

pritch · 06-20-2004, 09:52 PM

I did this a number of years ago, just playing around with spare parts, and I used a step side bed. It worked out fairly well. I made my cuts in the center of the bed sides, where the fenders covered the most (at least on the outside). I ended up with about two inches between the back of the cab and the front of the fenders. This truck was my daily driver for about 8 years until my wife wrecked it.

06-20-2004, 02:27 AM	#1
daniels84 Registered User Join Date: Mar 2004 Location: Edmonton, Alberta, Canada Posts: 16	Jimmy VS Shortbox frames Hello, I was wondering if there is any differences between a 1971 Jimmy 4x4 frame and the frame for a 71 Shortbox 4x4. I'm asking because I just recently bought a 71 Jimmy that had a 69 cab put on it years ago and I was wondering if I could somehow put a shortbox box on it without any major modifications. Thanks for your help.

06-20-2004, 02:33 AM	#2
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,368	The Jimmy/Blazer frame is shorter at the wheelbase by I think it is 10 inches.Here is a pic of a blazer frame with a cab and box on it. Look how much they had to cut off the front of the bed... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

06-20-2004, 02:34 AM	#3
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,368	Here's a Blazer to compair it to... Chuck Attached Images __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-20-2004, 09:52 PM	#4
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	I did this a number of years ago, just playing around with spare parts, and I used a step side bed. It worked out fairly well. I made my cuts in the center of the bed sides, where the fenders covered the most (at least on the outside). I ended up with about two inches between the back of the cab and the front of the fenders. This truck was my daily driver for about 8 years until my wife wrecked it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.