New 64 Stepper Project - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Joe Pass** · 08-08-2020, 10:42 PM

That's very nice......

**The Rocknrod** · 08-09-2020, 06:56 AM

Quote:

Originally Posted by Joe Pass

That's very nice......

Thank you Joe.

raylube · 08-16-2020, 06:38 AM

What a wonderful build you got here, Mr Master Chief.

**The Rocknrod** · 08-16-2020, 07:30 AM

Quote:

Originally Posted by raylube

What a wonderful build you got here, Mr Master Chief.

Well thank you, in a couple months I'll be home and working on it again.

raylube · 08-16-2020, 11:42 AM

You should quit buying all those shinny parts for it because you know what they say......chrome dont get you home...

**The Rocknrod** · 08-16-2020, 12:35 PM

People that don't know how to put things together say that.

But seriously, You can choose to drive a Cadillac or drive a pinto. That's whats great about America, it's your choice. This right here - Is my choice.

raylube · 08-16-2020, 03:25 PM

Its going to be awesome when it's done. You have chosen well.

**The Rocknrod** · 09-04-2020, 01:24 PM

I got both my Vent windows in from the truck shop in Orange, CA, and no this is not a pic of both of them:

**pdxhall** · 09-04-2020, 02:59 PM

The vent windows look great. I'll be interested to see if they fit as good as they look.

**The Rocknrod** · 09-04-2020, 03:18 PM

Quote:

Originally Posted by pdxhall

The vent windows look great. I'll be interested to see if they fit as good as they look.

Oh trust me........... I dont know yet either.

raylube · 09-04-2020, 05:56 PM

Wow those look awesome!!!! Did they have good reviews? I wonder about the quality of the rubber as everything I have that is repopped with rubber cracks apart in less than a year even when not in the sun. Keep us posted on the fit and finish. Can't wait until its done.

**The Rocknrod** · 09-05-2020, 10:13 AM

Got my Hayden 689 trans cooler in:

**The Rocknrod** · 09-05-2020, 10:20 AM

Also the new motor mounts, the trans mount is on the way:

**Joe Pass** · 09-05-2020, 12:33 PM

Looks great.....FYI on the engine mounts, I'm running the same ones with the matching trans mount and I was experiencing more than normal engine/drivetrain vibrations. Researching this I found its not all that uncommon, so I pulled the trans mount out and it was a vast improvement....debating doing the engine mounts next....This is turning out to be an impressive build....can't wait to see it driving. Have a safe Holiday
Joe

**The Rocknrod** · 09-05-2020, 01:51 PM

Thanks Joe, your the best.

On the trans cooler I'm going to run hard tubing instead of rubber hose. I'm using swagelok where I can and flare nuts & ferrules at the cooler.

**The Rocknrod** · 11-01-2020, 05:21 PM

Been getting parts and such, one of them is my new door handles and locks.

**Joe Pass** · 11-02-2020, 09:14 AM

Nice...

**The Rocknrod** · 11-07-2020, 04:02 PM

Got a set of Motofeet and casters in.

**The Rocknrod** · 11-07-2020, 04:26 PM

This is the stance I'm considering, static drop:

**Joe Pass** · 11-07-2020, 05:27 PM

All about the stance....I've bumped mine up an inch....california roads..lol
Name: stance.jpg
Views: 609
Size: 41.7 KB

**The Rocknrod** · 11-16-2020, 09:07 AM

I got this engine lift tool. Hopefully it wont bump the firewall when I go to install the engine.

**The Rocknrod** · 12-05-2020, 09:46 PM

Got my Mirror arm polished and the Oil Pan etc.

**The Rocknrod** · 01-07-2021, 06:16 AM

Installed my RedHead Steering Gear.

**Joe Pass** · 01-07-2021, 10:10 AM

Nice touch

roll_the_dice · 01-07-2021, 10:11 AM

Looks great!

08-08-2020, 10:42 PM	#301
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project That's very nice...... __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

08-16-2020, 06:38 AM	#303
raylube Registered User Join Date: Jan 2012 Location: Preston Idaho Posts: 279	Re: New 64 Stepper Project What a wonderful build you got here, Mr Master Chief.

08-16-2020, 11:42 AM	#305
raylube Registered User Join Date: Jan 2012 Location: Preston Idaho Posts: 279	Re: New 64 Stepper Project You should quit buying all those shinny parts for it because you know what they say......chrome dont get you home...

08-16-2020, 12:35 PM	#306
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project People that don't know how to put things together say that. But seriously, You can choose to drive a Cadillac or drive a pinto. That's whats great about America, it's your choice. This right here - Is my choice. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 08-16-2020 at 12:48 PM.

08-16-2020, 03:25 PM	#307
raylube Registered User Join Date: Jan 2012 Location: Preston Idaho Posts: 279	Re: New 64 Stepper Project Its going to be awesome when it's done. You have chosen well.

09-04-2020, 01:24 PM	#308
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project I got both my Vent windows in from the truck shop in Orange, CA, and no this is not a pic of both of them: Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

09-04-2020, 02:59 PM	#309
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,079	Re: New 64 Stepper Project The vent windows look great. I'll be interested to see if they fit as good as they look. __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

09-04-2020, 05:56 PM	#311
raylube Registered User Join Date: Jan 2012 Location: Preston Idaho Posts: 279	Re: New 64 Stepper Project Wow those look awesome!!!! Did they have good reviews? I wonder about the quality of the rubber as everything I have that is repopped with rubber cracks apart in less than a year even when not in the sun. Keep us posted on the fit and finish. Can't wait until its done.

09-05-2020, 10:13 AM	#312
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Got my Hayden 689 trans cooler in: Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

09-05-2020, 10:20 AM	#313
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Also the new motor mounts, the trans mount is on the way: Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

09-05-2020, 12:33 PM	#314
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project Looks great.....FYI on the engine mounts, I'm running the same ones with the matching trans mount and I was experiencing more than normal engine/drivetrain vibrations. Researching this I found its not all that uncommon, so I pulled the trans mount out and it was a vast improvement....debating doing the engine mounts next....This is turning out to be an impressive build....can't wait to see it driving. Have a safe Holiday Joe __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

09-05-2020, 01:51 PM	#315
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Thanks Joe, your the best. On the trans cooler I'm going to run hard tubing instead of rubber hose. I'm using swagelok where I can and flare nuts & ferrules at the cooler. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

11-01-2020, 05:21 PM	#316
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Been getting parts and such, one of them is my new door handles and locks. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 11-02-2020 at 09:44 AM.

11-02-2020, 09:14 AM	#317
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project Nice... __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

11-07-2020, 04:02 PM	#318
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Got a set of Motofeet and casters in. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

11-07-2020, 04:26 PM	#319
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project This is the stance I'm considering, static drop: Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

11-07-2020, 05:27 PM	#320
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project All about the stance....I've bumped mine up an inch....california roads..lol __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

11-16-2020, 09:07 AM	#321
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project I got this engine lift tool. Hopefully it wont bump the firewall when I go to install the engine. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

12-05-2020, 09:46 PM	#322
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Got my Mirror arm polished and the Oil Pan etc. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

01-07-2021, 06:16 AM	#323
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Installed my RedHead Steering Gear. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

01-07-2021, 10:10 AM	#324
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project Nice touch __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

01-07-2021, 10:11 AM	#325
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: New 64 Stepper Project Looks great! __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.