short wheel base frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Luv68's · 07-04-2004, 03:32 PM

I have bought another truck, and now I dont need this frame. It is a 72 frame short wheel base, no rust thru but there is some pitting. There is nothing attached to the frame, I have already stripped and painted with Duplicolor undercoating. It leaves avery nice finish, but is flat in color. i like the way it looks. I have the old front suspension ( a arms, springs, steering linkage and 1 spindle ) There is no rearend, but if you need one I have 71? rear that I took the 5 lug axles out of and put 6 lug axles back to keep it sealed. $ 150.00 or best offer for all. I have done all the hard work for you. I do mean hard work, this frame came off a Georgia truck and had clay everywhere. I am going to try and attach pics, hopefully they will work. Must be picked up at my house. EDIT: the rearend, springs and trailing arms in the pics are NOT included. Don

Luv68's · 07-05-2004, 04:12 PM

Too high? Make me an offer, I need to get rid of it to make room for new truck. Trade ?

smonty · 07-05-2004, 05:28 PM

Hello,

Wish you were closer. Your price is very fair and below what is usually paid for a frame like this. Might contact Mothertruckers as they are in FL. I would buy it if you were closer.

Ernie

Luv68's · 07-05-2004, 07:29 PM

Thanks I will give Ed a call. Don

07-04-2004, 03:32 PM	#1
Luv68's Registered User Join Date: Jan 2001 Location: Russellville, Tn and DeLand Fl. Posts: 533	short wheel base frame I have bought another truck, and now I dont need this frame. It is a 72 frame short wheel base, no rust thru but there is some pitting. There is nothing attached to the frame, I have already stripped and painted with Duplicolor undercoating. It leaves avery nice finish, but is flat in color. i like the way it looks. I have the old front suspension ( a arms, springs, steering linkage and 1 spindle ) There is no rearend, but if you need one I have 71? rear that I took the 5 lug axles out of and put 6 lug axles back to keep it sealed. $ 150.00 or best offer for all. I have done all the hard work for you. I do mean hard work, this frame came off a Georgia truck and had clay everywhere. I am going to try and attach pics, hopefully they will work. Must be picked up at my house. EDIT: the rearend, springs and trailing arms in the pics are NOT included. Don Attached Images Last edited by Luv68's; 07-04-2004 at 03:33 PM. Reason: clarification

07-05-2004, 04:12 PM	#2
Luv68's Registered User Join Date: Jan 2001 Location: Russellville, Tn and DeLand Fl. Posts: 533	Too high Too high? Make me an offer, I need to get rid of it to make room for new truck. Trade ?

07-05-2004, 05:28 PM	#3
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply Hello, Wish you were closer. Your price is very fair and below what is usually paid for a frame like this. Might contact Mothertruckers as they are in FL. I would buy it if you were closer. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-05-2004, 07:29 PM	#4
Luv68's Registered User Join Date: Jan 2001 Location: Russellville, Tn and DeLand Fl. Posts: 533	Thanks I will give Ed a call. Don



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.