1967 C10 inside door handle? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ricks1971** · 12-18-2020, 04:26 PM

I know the 1967 C10 inside door handle is hard to find. I was told thats its the same inside door handle as a 1967 camero? do any of you guys know this to be a fact? thanks Rick

**Grumpy old man** · 12-18-2020, 04:33 PM

They are not the same , They look the same but the shaft depth is different . The 67 inner handles are reproduced .

I ran into the same thing , Here is a thread with more info on where to buy them .

http://67-72chevytrucks.com/vboard/s...d.php?t=787269

**Ricks1971** · 12-18-2020, 04:36 PM

who is making them?
thanks Rick

**kev2809** · 12-18-2020, 06:52 PM

Quote:

Originally Posted by Ricks1971

who is making them?
thanks Rick

post 7. believe its gmcpauls?

**HIGHWAY BY THE SEA** · 12-18-2020, 08:18 PM

I checked GMC Paul's website today. Apparently they are discontinued. Too bad. I need some for my C3500 project.

Redneck Rydes · 12-18-2020, 09:15 PM

I have about 4 of them,but can't get to them right know

Andy4639 · 12-18-2020, 10:16 PM

Quick google search.

https://www.partsgeek.com/gbproducts...71&fp=pp&gbm=a

**HIGHWAY BY THE SEA** · 12-19-2020, 12:43 AM

Thanks for the link Andy!
I had seen that link when I did a computer search earlier but it would not open on my computer for some reason. I thought it was an old dead link. I appreciate this information.

Andy4639 · 12-19-2020, 06:03 PM

Quote:

Originally Posted by HIGHWAY BY THE SEA

Thanks for the link Andy!
I had seen that link when I did a computer search earlier but it would not open on my computer for some reason. I thought it was an old dead link. I appreciate this information.

Your welcome.

**'68OrangeSunshine** · 12-19-2020, 10:05 PM

The '67 [skinny] Door Handles are listed in Classic Industries' new catalog.
The one with a Red '71 Chevy Stepside passing an arrow roadsign marked ''North Pole''.
Repros $11.99. GM originals $76.99.

**Ricks1971** · 12-20-2020, 03:52 PM

Thanks guys I found them at Classic Heartbeat.

72c20customcamper · 12-20-2020, 04:22 PM

Not sure if they are the same as 67 but I bought these. American made

https://www.ebay.com/itm/INTERIOR-DO...-/281993878295

From this thread

https://67-72chevytrucks.com/vboard/....php?p=8586694

Dug one out of my parts stash . Also came across 2 nos window cranks I bought for my 66 chevelle.
But these are nice pieces just ordered 4 more

**'68OrangeSunshine** · 12-20-2020, 06:16 PM

Quote:

Originally Posted by 72c20customcamper

Not sure if they are the same as 67 but I bought these. American made

https://www.ebay.com/itm/INTERIOR-DO...-/281993878295

From this thread

https://67-72chevytrucks.com/vboard/....php?p=8586694

Dug one out of my parts stash . Also came across 2 nos window cracks I bought for my 66 chevelle.
But these are nice pieces just ordered 4 more

Yeah, the ''Volvo'' truck door handles are good quality. But they're not the skinny 1967-only type, they are 1968-and later. They will fit and function on a '67, but if you want period purity, they're too wide.

72c20customcamper · 12-20-2020, 06:36 PM

Quote:

Originally Posted by '68OrangeSunshine

Yeah, the ''Volvo'' truck door handles are good quality. But they're not the skinny 1967-only type, they are 1968-and later. They will fit and function on a '67, but if you want period purity, they're too wide.

I see the difference now, the 67 look just like my 66 Chevelles inner handle. Thin on the handle

**'68OrangeSunshine** · 12-20-2020, 07:03 PM

Quote:

Originally Posted by 72c20customcamper

I see the difference now, the 67 look just like my 66 Chevelles inner handle. Thin on the handle

According to Grumpy, post #2 above, the shaft lengths are different between the '67 truck and '66 Chevelle. Don't know anything about the Cars, myself.

12-18-2020, 04:26 PM	#1
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	1967 C10 inside door handle? I know the 1967 C10 inside door handle is hard to find. I was told thats its the same inside door handle as a 1967 camero? do any of you guys know this to be a fact? thanks Rick

12-18-2020, 04:36 PM	#3
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: 1967 C10 inside door handle? who is making them? thanks Rick

12-18-2020, 08:18 PM	#5
HIGHWAY BY THE SEA Senior Member Join Date: Nov 2012 Location: BY THE CAROLINA SEA Posts: 922	Re: 1967 C10 inside door handle? I checked GMC Paul's website today. Apparently they are discontinued. Too bad. I need some for my C3500 project. __________________ FRANKENTRUCK 1981 Chevrolet C10 Shortbed Stepside GRANDTRUCK 1968 Chevrolet C10 Stepside Longbed http://67-72chevytrucks.com/vboard/s...d.php?t=584617 PROJECT JIGSAW 1967 GMC C3500 GREAT WHITE 1986 Blazer M1009 454 engine w/700R4 transmission gas conversion

12-18-2020, 09:15 PM	#6
Redneck Rydes Registered User Join Date: Feb 2016 Location: Trenton,Ontario & South Carolina Posts: 755	Re: 1967 C10 inside door handle? I have about 4 of them,but can't get to them right know Last edited by Redneck Rydes; 12-18-2020 at 09:17 PM. Reason: Wrong spelling

12-18-2020, 10:16 PM	#7
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: 1967 C10 inside door handle? Quick google search. https://www.partsgeek.com/gbproducts...71&fp=pp&gbm=a __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-18-2020, 04:33 PM	#2
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: 1967 C10 inside door handle? They are not the same , They look the same but the shaft depth is different . The 67 inner handles are reproduced . I ran into the same thing , Here is a thread with more info on where to buy them . http://67-72chevytrucks.com/vboard/s...d.php?t=787269 __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

12-19-2020, 12:43 AM	#8
HIGHWAY BY THE SEA Senior Member Join Date: Nov 2012 Location: BY THE CAROLINA SEA Posts: 922	Re: 1967 C10 inside door handle? Thanks for the link Andy! I had seen that link when I did a computer search earlier but it would not open on my computer for some reason. I thought it was an old dead link. I appreciate this information. __________________ FRANKENTRUCK 1981 Chevrolet C10 Shortbed Stepside GRANDTRUCK 1968 Chevrolet C10 Stepside Longbed http://67-72chevytrucks.com/vboard/s...d.php?t=584617 PROJECT JIGSAW 1967 GMC C3500 GREAT WHITE 1986 Blazer M1009 454 engine w/700R4 transmission gas conversion

12-19-2020, 10:05 PM	#10
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,423	Re: 1967 C10 inside door handle? The '67 [skinny] Door Handles are listed in Classic Industries' new catalog. The one with a Red '71 Chevy Stepside passing an arrow roadsign marked ''North Pole''. Repros $11.99. GM originals $76.99. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not. Last edited by '68OrangeSunshine; 12-20-2020 at 01:46 AM.

12-20-2020, 03:52 PM	#11
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: 1967 C10 inside door handle? Thanks guys I found them at Classic Heartbeat.

12-20-2020, 04:22 PM	#12
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,626	Re: 1967 C10 inside door handle? Not sure if they are the same as 67 but I bought these. American made https://www.ebay.com/itm/INTERIOR-DO...-/281993878295 From this thread https://67-72chevytrucks.com/vboard/....php?p=8586694 Dug one out of my parts stash . Also came across 2 nos window cranks I bought for my 66 chevelle. But these are nice pieces just ordered 4 more Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary. Last edited by 72c20customcamper; 12-20-2020 at 06:37 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.