The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-12-2004, 09:19 AM   #1
CHEVYJEFF
Registered User
 
CHEVYJEFF's Avatar
 
Join Date: Oct 2002
Location: WYLIE TEXAS
Posts: 232
14 sf pb cable ???

Any one got a part # or truck model that I could use to get some parking brake cables that will work on my blazer to match the 14 bolt S.F. I swapped this in place of my old 10 bolt and the cables are too short. Thinking either a 454 SS that had a 14 SF or modifying the ones that came out of the 87 3/4 ton truck or if cables from a blazer w/ a 12 bolt would work.
__________________
http://members.cardomain.com/chevyjeff
57 2 DOOR HDTP
82 CORVETTE
90 V10 BLAZER
97 REGAL LSR 2100 (BOAT)
CHEVYJEFF is offline   Reply With Quote
Old 07-12-2004, 08:26 PM   #2
Bill W
Registered User
 
Join Date: Mar 2003
Location: Oregon
Posts: 229
How much shorter are your cables and why? I was under the impression that the brake set up on the 14 bolt SF was the same as the 10 or 12 bolt.

Bill
Bill W is offline   Reply With Quote
Old 07-12-2004, 08:52 PM   #3
CEDJUNIOR
Registered User
 
Join Date: Mar 2003
Location: Irving/Valley Ranch, Tx
Posts: 897
The cables should work just fine. I swapped out a 10bolt for a 14SF and used the cables on my truck. They should be pretty tight though.
__________________
GM RPO Codes

'95 K1500 4x4 Ext Cab
5.7 TBI
NV4500 Tranny, 14 Bolt swapped in, locker, 3.73's
CEDJUNIOR is offline   Reply With Quote
Old 07-13-2004, 09:26 AM   #4
CHEVYJEFF
Registered User
 
CHEVYJEFF's Avatar
 
Join Date: Oct 2002
Location: WYLIE TEXAS
Posts: 232
the distance between the stopper end that fits into the outside face of the backing plate and the pressed on end that fits into the lever attached to the shoe is way too short, causing the pb brak to be extended to far out to even get the drum on. My cables are run in parallel to a bracket that joins them together. Thinking I may use a new longer inner cable and press on my stopper ends
__________________
http://members.cardomain.com/chevyjeff
57 2 DOOR HDTP
82 CORVETTE
90 V10 BLAZER
97 REGAL LSR 2100 (BOAT)
CHEVYJEFF is offline   Reply With Quote
Old 07-20-2004, 08:47 PM   #5
1971 2wd
Registered User
 
Join Date: Jan 2003
Location: PARADISE,CA
Posts: 57
Yeah, I'm having the same problem. Mine is about 2-1/2" short on each side.
So heres a easy fix.
Just cut the bracket in half (the one that connects the 2 cables together) and weld in 2 strips of steel to your length.
It worked on mine.
__________________
72 blazer, 71 2wd short bed, 67 nova
Too many damn toys!!
1971 2wd is offline   Reply With Quote
Old 07-21-2004, 10:00 AM   #6
CHEVYJEFF
Registered User
 
CHEVYJEFF's Avatar
 
Join Date: Oct 2002
Location: WYLIE TEXAS
Posts: 232
you are talking about the u shaped tube looking thing that holds the front cable to the rear cable or the bracket that mounts to the frame
__________________
http://members.cardomain.com/chevyjeff
57 2 DOOR HDTP
82 CORVETTE
90 V10 BLAZER
97 REGAL LSR 2100 (BOAT)
CHEVYJEFF is offline   Reply With Quote
Old 07-22-2004, 05:02 PM   #7
1971 2wd
Registered User
 
Join Date: Jan 2003
Location: PARADISE,CA
Posts: 57
The Cable to Cable thingy. (________) Looks like this, somewhat..

Yeah thats the part I'm talking about!!
__________________
72 blazer, 71 2wd short bed, 67 nova
Too many damn toys!!

Last edited by 1971 2wd; 07-22-2004 at 05:05 PM.
1971 2wd is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:09 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com