|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-18-2021, 11:34 AM
|
#1 |
|
Senior Member
  Join Date: Jan 2015
Location: Kearneysville Wv
Posts: 3,955
|
measurement for 71DG4 door mirrors
Can someone help with the measurements for the 71 DG4 mirrors?
I need the top factory measurements for the R&L door top bolt holes from the front edge of the door and from the body line down thanks in advance |
|
|
|
04-18-2021, 02:06 PM
|
#2 |
|
Senior Member
Join Date: May 2010
Location: Wisconsin & Arizona
Posts: 4,852
|
Re: measurement for 71DG4 door mirrors
Does this help? I thought I had pictures with tape measures, but no luck. I believe both doors are the same.
__________________
Jim |
|
|
|
|
04-18-2021, 04:06 PM
|
#3 |
|
Senior Member
Join Date: May 2010
Location: Wisconsin & Arizona
Posts: 4,852
|
Re: measurement for 71DG4 door mirrors
I found the pics of my '69. The doors and holes are factory original to the truck. All are of the driver's door. The holes are "production line close" to the assembly manual page I posted above.
__________________
Jim Last edited by FirstOwner69; 04-18-2021 at 05:41 PM. |
|
|
|
|
04-18-2021, 11:31 PM
|
#4 |
|
Senior Member
Join Date: Jan 2015
Location: Kearneysville Wv
Posts: 3,955
|
Re: measurement for 71DG4 door mirrors
Thanks for the measurements! Now I can mount the mirrors!! This was a 2WD C/10 and I put it on a 72 K/20 frame with Dana 60f front and 14 bolt rear out of a 88 K/30 crewcab
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
