07-23-2004, 11:47 AM | #1 |
Registered User
Join Date: Feb 2002
Location: orange, tx usa
Posts: 167
|
a few a/c questions ?
Fan speed only one speed. It is about medium speed. The compressor cuts off when you go in the high position. Is this a switch problem ? Also, The middle lever on the dash has a piece missing that presses down the switch to cut on the compressor( ive got the switch bypassed to get it to run). Last question: hoses on water pump to heater core: which hose is supply to core ? the one on the water pump or the one on the intake manifold ?
__________________
guypm 1971 SWB Fleetside/350 performer rpm heads &intake/ holley 750dp/1.5roller rockers/MSD6a/700r4 1650stall/one piece driveshaft/3.73 open/dynomax ceramic coated headers/3chamber flowmasters/ |
07-23-2004, 12:10 PM | #2 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
There is a good possibility that the switch is bad, but it could be the relay or you could have a problem with the resistors.
The bottom 5/8" hose on the heater core is the supply and it should be connected to the intake manifold nipple. The top 3/4" hose is the return and it will go to the water pump or the radiator. Jim |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|