![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
![]() Join Date: Jul 2000
Location: North Texas
Posts: 3,488
|
71-72 gear indicator in place of 69
Show me photos of your 71-72 gear indicator and pointer.
I have a 71-72 pointer (#10 below), because mine broke and I couldn't find a complete 67-70 pointer. However, the pointer sticks up above the 69 gear indicator and housing and looks goofy. If I buy a 71-72 indicator and housing (#5 and #8 below), will I be able to use the two existing screw holes, or will I end up with the old ones showing?
__________________
Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! |
![]() |
![]() |
![]() |
#2 |
Always on the hunt...
![]() Join Date: Sep 2006
Location: Portland, OR.
Posts: 5,604
|
Re: 71-72 gear indicator in place of 69
Here are a couple of pictures that we recently took for another member showing all three (#9,#10 & #13 on your above diagram) year specific automatic column shift indicator pointers used between 67-72, the pics show the side by side pointer design, size and height differences. We currently have whichever style shift pointer, lens and housing setup combo that you decide on available/ready to ship in OE used or new repro and if you decide on the 71-72 style we could also offer/supply the three parts (#5, #8 & #10) in GM NOS. Let me know, Mel
![]() .
__________________
***For any return/past customers & friends*** Before sending of any funds, please wait for a confirmed total and instructions for sending as our payment account info has been changed as of Jan. 2023. Thanks... |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Jul 2000
Location: North Texas
Posts: 3,488
|
Re: 71-72 gear indicator in place of 69
Does the 67-70 non-tilt pointer have the red "lens" in it?
One thing I do like about the 71-72 pointer is it clears my column-mounted tach better. Do you also sell the 71-72 indicator and housing (#5 and #8) for 3-speed auto trans? Thanks.
__________________
Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! |
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() ![]() Join Date: Jan 2005
Location: CA
Posts: 5,470
|
Re: 71-72 gear indicator in place of 69
If Mel doesn't have a 67-70 pointer lens for you to go with his pointer, I've got the lens for you.
If you decide to go the 71-72 direction, then Mel I'd be interested in a nice OEM #9 67-70 pointer if you've got one. Last edited by pjmoreland; 02-06-2022 at 11:22 PM. |
![]() |
![]() |
![]() |
#5 | |
Senior Member
![]() Join Date: Jul 2000
Location: North Texas
Posts: 3,488
|
Re: 71-72 gear indicator in place of 69
Quote:
I may just go with the 71-72 parts #5 and #8. If I have to relocate the screw holes, that's no big deal. I would sure like to see a photo of the 71-72 parts installed. Anyone? Bueller? Bueller?
__________________
Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! |
|
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() ![]() Join Date: Jan 2005
Location: CA
Posts: 5,470
|
Re: 71-72 gear indicator in place of 69
I owned a 69 that had the 71-72 style of indicator on the column. I don't know the history of the truck though. There's always the chance a previous owner swapped the column.
|
![]() |
![]() |
![]() |
#7 |
Mr. Cheyenne
![]() Join Date: Jun 2020
Location: Kyle, Texas
Posts: 1,688
|
Re: 71-72 gear indicator in place of 69
Here is mine. I have a 72 C10 Auto but my column I replaced for a Shorten Tilt (from a long gone forum member). So no telling where it came from or what year.
Hope it helps. Sorry for the night photos, I just took them. PS: “Look don't make me participate in your stupid crap if you don't like the way I do it.” ;-)
__________________
Richard '72 Chevy C10 Cheyenne *Super WHT/MED BRONZE/WHT SBC 350 | TH350 | LWB | AC | Buddy Seats Upgrades: Tilt | Front Sway Bar | Radio | Sliding Window | Bed Spare w/Lock Bed Rails | Full LEDs | Courtesy Lights | Tachometer | Glovebox Lock & Light | Head Light Relays | *Upgraded Fully Super Trim Last edited by Rich72C10; 02-07-2022 at 10:29 PM. |
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() Join Date: Jul 2000
Location: North Texas
Posts: 3,488
|
Re: 71-72 gear indicator in place of 69
Thanks guys. I can see that's it's taller, which will work with my taller 71-72 pointer. Wish it was chrome, though, like the 67-70.
__________________
Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! |
![]() |
![]() |
![]() |
#9 |
Senior Member
![]() ![]() Join Date: Jan 2005
Location: CA
Posts: 5,470
|
Re: 71-72 gear indicator in place of 69
ToonMan has a '67 that has a 71-72 style lens on the column. Again, there's no guarantee the column is original to the truck. I'm surprised nobody has answered your question definitively yet.
https://67-72chevytrucks.com/vboard/...d.php?t=828179 |
![]() |
![]() |
![]() |
#10 |
Senior Member
![]() Join Date: Jul 2000
Location: North Texas
Posts: 3,488
|
Re: 71-72 gear indicator in place of 69
Everyone has really been helpful here. I'm going to order a 71-72 non-tilt indicator and housing. My column is completely torn apart, so If I have to drill two new screw holes and weld up the existing ones, it's no big deal. Unfortunately it seems the non-tilt version of the housing is available only in black.
__________________
Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! |
![]() |
![]() |
![]() |
#11 |
Senior Member
![]() ![]() Join Date: Jan 2005
Location: CA
Posts: 5,470
|
Re: 71-72 gear indicator in place of 69
I had an all original '72 with parchment interior, and the non-tilt column in it was black, and so was the shift indicator.
|
![]() |
![]() |
![]() |
#12 |
Senior Member
![]() Join Date: Jul 2000
Location: North Texas
Posts: 3,488
|
Re: 71-72 gear indicator in place of 69
Received my parts from Classic Industries. As you can see, the 71-72 pointer, indicator, and housing work great with my non-tilt 69 column. I was even able to use the existing screw holes. And my old fiber optic cable end snaps right up into the pointer body. Win, win!
Never mind the paint color. It looked close on the store shelf, but it sucks. Needs to be maroon. Or I may just go with black.
__________________
Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|