Identifing 6 cyl P/S adjuster arms. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Accelo** · 05-07-2022, 01:35 AM

I have a set of 6 cylinder bracket for the power steering.
I found some other brackets for the adjuster and am attempting to figure out the application. May be for the 6 cylinder brackets.
Anyone post the measurements so I can confirm if they are correct?

**Palf70Step** · 05-07-2022, 07:27 AM

I just got rid of all my 6 stuff, but what size engine 250 or 292? Also is it integrated or non-integrated head 250. All 3 of those make it different measurements and mounting.

**Accelo** · 05-07-2022, 10:56 AM

Quote:

Originally Posted by Palf70Step

I just got rid of all my 6 stuff, but what size engine 250 or 292? Also is it integrated or non-integrated head 250. All 3 of those make it different measurements and mounting.

I am confident this bracket fits the 250 with the non-integrated head. I don't believe this is if for 292.

I was hoping someone will take some measurement I can compare the adjustment bracket lengths.

Dirt's72 · 05-07-2022, 04:11 PM

I checked my power steering on my two 6 cylinder trucks. The large bracket in your picture looks like mine on my 72 250 but the other two brackets connected to the big one on yours are different. Of the three separate ones in your picture the middle one looks similar to one on the back of my 69 292 power steering but mine has a slight bend in the middle.

Here's a couple examples this first one I'm not sure what year but they are for a 250.

https://67-72chevytrucks.com/vboard/...d.php?t=818875

These are for a 1972 250.

https://67-72chevytrucks.com/vboard/...d.php?t=819219

05-07-2022, 01:35 AM	#1
Accelo Senior Member Join Date: Mar 2015 Location: washington Posts: 2,295	Identifing 6 cyl P/S adjuster arms. I have a set of 6 cylinder bracket for the power steering. I found some other brackets for the adjuster and am attempting to figure out the application. May be for the 6 cylinder brackets. Anyone post the measurements so I can confirm if they are correct? Attached Images

05-07-2022, 07:27 AM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: Identifing 6 cyl P/S adjuster arms. I just got rid of all my 6 stuff, but what size engine 250 or 292? Also is it integrated or non-integrated head 250. All 3 of those make it different measurements and mounting. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-07-2022, 04:11 PM	#4
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: Identifing 6 cyl P/S adjuster arms. I checked my power steering on my two 6 cylinder trucks. The large bracket in your picture looks like mine on my 72 250 but the other two brackets connected to the big one on yours are different. Of the three separate ones in your picture the middle one looks similar to one on the back of my 69 292 power steering but mine has a slight bend in the middle. Here's a couple examples this first one I'm not sure what year but they are for a 250. https://67-72chevytrucks.com/vboard/...d.php?t=818875 These are for a 1972 250. https://67-72chevytrucks.com/vboard/...d.php?t=819219 Last edited by Dirt's72; 05-07-2022 at 04:23 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.