Rack and pinion upgrade

[Sick5]

Morning fellas.
Looking for some advise and direction. I've searched the furom but couldn't find anything on this product. Before i start. I have a 61 gmc carryal that i just pancaked the crossmember and now looking to upgrade the steering. From what I read the geometry changes after pancaking the crossmember and have read that one of the best ways to fix it is by going rack and pinion. Which one should I get? Also if i have to spend 3k on it might as well buy a drop member. I'm looking to stay under 1k. Here is one I've been eyeing and it's in stock

Unisteer Performance 8011910-01 - Unisteer Rack and Pinion Conversion Kits

Would this work?

[The Rocknrod]

Havnt seen a Unisteer install yet, but here is a NoLimit install - http://67-72chevytrucks.com/vboard/s...d.php?t=465423

Oh wait Unisteer on a 69 pretty much the same - http://67-72chevytrucks.com/vboard/s...d.php?t=540249

[Sick5]

Thanks

[88Stanger]

Not sure this will help you and maybe the year is the issue (i have 1966) , but I installed a Rack system from POL, direct bolt on. Installed to dame easy honestly. Pics are attached and the small write up is in my build

[Sick5]

Originally Posted by 88Stanger

Not sure this will help you and maybe the year is the issue (i have 1966) , but I installed a Rack system from POL, direct bolt on. Installed to dame easy honestly. Pics are attached and the small write up is in my build

Thanks
It's pretty much the same thing. If you wanted to could you go up another 2 inches of course you would have to notch the frame