Need help with engine ID #'s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Robert1970C20rstbukt · 08-05-2004, 04:18 PM

Got these off the front passenger's side ledge on the block:

V0413CNV

10C167383

Can somebody translate these? I tried looking on Mortec, etc but I'm stuck. I was told that this is a 350 block, if that helps anything.

Thanks

dubie · 08-05-2004, 04:34 PM

Look on the rear of block beside the distributor on the drivers side and there should be a number there. It will be a lot easier to de code with that number. It shouldn't cintain any letters if it's a SBC

jose · 08-05-2004, 04:43 PM

Heres what i came up with useing the last letters CNV . Jose

1970 CNV 350 tur hydro trans. 250 horse 2 bolt main Caprice

Bobalouie · 08-05-2004, 04:45 PM

V0413= Manufactured in Flint, Michigan on April 13th

CNV= 1970 350cid w/tur hydro trans. 250HP 2BBL Carb used in the Caprice

Robert1970C20rstbukt · 08-05-2004, 04:56 PM

OK, thanks for the help everybody.

08-05-2004, 04:18 PM	#1
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Need help with engine ID #'s Got these off the front passenger's side ledge on the block: V0413CNV 10C167383 Can somebody translate these? I tried looking on Mortec, etc but I'm stuck. I was told that this is a 350 block, if that helps anything. Thanks __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

08-05-2004, 04:34 PM	#2
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	Look on the rear of block beside the distributor on the drivers side and there should be a number there. It will be a lot easier to de code with that number. It shouldn't cintain any letters if it's a SBC __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

08-05-2004, 04:43 PM	#3
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	Heres what i came up with useing the last letters CNV . Jose 1970 CNV 350 tur hydro trans. 250 horse 2 bolt main Caprice __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

08-05-2004, 04:45 PM	#4
Bobalouie Fetzer Valve Technician Join Date: Jun 2003 Location: Stillwater, OK Posts: 205	V0413= Manufactured in Flint, Michigan on April 13th CNV= 1970 350cid w/tur hydro trans. 250HP 2BBL Carb used in the Caprice __________________ 1972 Chevy K10 SWB

08-05-2004, 04:56 PM	#5
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	OK, thanks for the help everybody. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.