Dash panel lower mount bolts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RR440MAN · 07-03-2023, 12:18 AM

Interior dash panel. Does anyone know what size or type bolts that mount the lower under dash points to the upper kick panel area? I need to cut the AC vent holes in the non AC dash panel and need to install some lower bolts to prevent movement.

Thanks!

**LockDoc** · 07-03-2023, 01:40 PM

Quote:

Originally Posted by RR440MAN

Interior dash panel. Does anyone know what size or type bolts that mount the lower under dash points to the upper kick panel area? I need to cut the AC vent holes in the non AC dash panel and need to install some lower bolts to prevent movement.

Thanks!

Should be 5/16-18 x 3/4 or 1" long. That would take a 1/2 inch wrench size....

LockDoc

RR440MAN · 07-03-2023, 02:20 PM

Thx,

I’ll make a run and pick some up.

07-03-2023, 12:18 AM	#1
RR440MAN Registered User Join Date: Oct 2017 Location: Bakersfield California Posts: 17	Dash panel lower mount bolts Interior dash panel. Does anyone know what size or type bolts that mount the lower under dash points to the upper kick panel area? I need to cut the AC vent holes in the non AC dash panel and need to install some lower bolts to prevent movement. Thanks! Attached Images

07-03-2023, 02:20 PM	#3
RR440MAN Registered User Join Date: Oct 2017 Location: Bakersfield California Posts: 17	Re: Dash panel lower mount bolts Thx, I’ll make a run and pick some up.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.