|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-06-2023, 02:29 PM
|
#1 |
|
Junior Member
 Join Date: Jul 2023
Location: Warwick ny
Posts: 56
|
Common bolt thread sizes used on 72 k20 longbed
I'm curious as to what the most commonly used bolt sizes used .
I will need to get the appropriate tap/chasers for the truck to clean out the bolt holes after paint. Obviously I will tape any studs Thanks all. Apologies if there is a thread already posted. I did a quick search and found nothing |
|
|
|
09-06-2023, 04:01 PM
|
#2 |
|
Registered User
Join Date: Oct 2020
Location: Albuquerque, New Mexico
Posts: 474
|
Re: Common bolt thread sizes used on 72 k20 longbed
3/8-16
|
|
|
|
|
09-06-2023, 07:31 PM
|
#3 |
|
Junior Member
Join Date: Jul 2023
Location: Warwick ny
Posts: 56
|
Re: Common bolt thread sizes used on 72 k20 longbed
Thank you.
|
|
|
|
|
09-06-2023, 10:27 PM
|
#4 |
|
Registered User
Join Date: Dec 2020
Location: Joggins Nova Scotia
Posts: 1,597
|
Re: Common bolt thread sizes used on 72 k20 longbed
It does depend on what area of the truck you're working on.alot of the sheetmetal is attached with 5/16's coarse thread bolts,some 3/8's.on the engine,depending what engine,there will be 1/4, 5/16's, 3/8's, 7/16's and 1/2 inch coarse thread usually.if you buy or have a tap & die set with SAE standard taps,you'll have all those sizes you need.
|
|
|
|
|
09-06-2023, 11:26 PM
|
#5 |
|
Registered User
Join Date: Dec 2017
Location: Elkhart, Texas
Posts: 1,841
|
Re: Common bolt thread sizes used on 72 k20 longbed
If you buy just 2 - 3 sizes, you'll invariably need another size or two after you get started.. Taps and dies, bought individually can get expensive.. Go to Lowes and get this 11 size set..
https://www.lowes.com/pd/IRWIN-24-Pi...Set/1003018222 Last edited by RustyPile; 09-07-2023 at 08:38 AM. Reason: correct spelling |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
